Project "River Truck" - CCLB 4x4

[monte0185]

Great lookin truck and love the hummer wheels as well. My dually that im working on now had a stuck caliper when i got it. I always change the lines when i change the calipers just as a precaution. Working on cars all my life ive seen a few of each. Cheap insurance is the main reason I change them though. I always gravity bleed all my brakes though. Done it all my life and never had an issue.

[bnoon]

Yup, one of these type of oil cans and some 4mm hose and you can pressure bleed the whole truck in just a few minutes with no helpers. Just remember to suck out the reservoir first so that it doesn't overflow. I still keep learning that one the hard way LOL!

[Sodell]

Trucks coming along.. Sorry for the delay but here is the photo of that bumper. If you want it, it's yours. [IMG][/IMG]

[arrover]

I opened some truck parts on Christmas day. All of my emergency brake cables are gone so this is the start to rebuilding the system. The power steering input shaft seal leaks so hopefully this kit will fix that. My dome light lens has always been missing so it's nice to have a replacement but the NAPA lens doesn't seem to be very good quality. It works though. I think I'm going to wait on installing the door strikers until I rebuild the hinges. The locking gas caps are just a little extra security for when I have to leave the truck unattended at the river.

[arrover]

I got the hubs and new discs put together and new bearings/seals installed. They look pretty good on the truck. I haven't driven it yet because I bought new brake hoses as you guys suggested. Getting the old ones off has not been fun but It's getting there.

[arrover]

This video is from the first day that I bought the truck. It's kind of fun to watch the progress since this day.

A Project Begins: 1982 GMC 1 Ton Crew Cab -...

[y5mgisi]

Good stuff!

[Low Elco]

Gonna be nice nice when it's done. It's come a long way!

[Sodell]

Those brake lines are a pain...hubs look good!

[arrover]

Thanks guys! The brake hoses have been a pain but I got them off finally. I cut the brake hose in sections to see if it was collapsed internally. It looked like it was probably functioning fine but the middle section looked like it may have been starting to collapse. The core of the hose was sort of triangular shaped. I cut the hoses off the truck and they cut really easily. It feels good to be replacing them. My theory is that whatever caused the uneven brake disc wear, happened a while ago and was corrected by a previous owner. They just took a shortcut and didn't replace the discs.

[arrover]

Here are some pictures that I should have posted a couple weeks ago. I got everything back together with the new Offroad Design extended/braided brake lines. They will allow for up to a 6" lift if I decide to lift it in the future.

[arrover]

And....here's a video of the brake line removal.

1973-1987 Chevy Truck - How-To Remove Front Brake...

[y5mgisi]

Great work!

[Greenlee]

Nice work!

[Sodell]

Any updates?

[Hankster]

x2 ^^

[arrover]

No, Sorry guys. Nothing recently. I've been working on other peoples vehicles and nothing very exciting.... I will for sure update when I work on the truck again. Thanks for asking!

[68Timber]

Cool truck.

[Sodell]

I still have that bumper, I pm'd my phone number.

[arrover]

Originally Posted by Sodell

I still have that bumper, I pm'd my phone number.

Thanks a bunch man. I just haven't been over your way lately. Hopefully soon. Thanks again!

[arrover]

Sorry for the lack of updates. It's mostly just because I've been busy.

I bought the molded Husky Liner floor mats. I'm going to be replacing the carpet in my truck some time soon and I wanted something to protect it. I'm sure people will be getting in and out of the truck with dirty shoes so I wanted some mats that could hold the dirt. I'm fairly satisfied with these Husky Liners. They aren't perfect but I'd give them a "B". There's some loose material on the sides of the trans hump and I might have to cut some material out from under the gas pedal and around the floor headlight dimming switch. I'm not sure on those two things yet. I would buy them again though. Husky lists them as fitting 1980-1987(91) trucks. I'm not sure why they don't include the older trucks. I believe that they only make these in black. I would have like to get a set in tan but oh well... Here are some pictures since I couldn't find any on the web:

[arrover]

Some more pics in the truck.

[arrover]

Here's a video review of the mats if you want to get another look at them:

Husky Liner Floor Mats for 1980-1987 Chevy/GMC...

[Low Elco]

Nice, but I'd trip on the lip on the door side and bust my a$$! I like 'em, though!

[arrover]

I've been a little lax on my truck work and posting lately but here are some updates. This picture is my friends brand new 2015 Duramax and my '82.