71 C30 dually restoration

[MrBeast]

What are your plans for a bed on it?

[502ms]

Thanks for the info...definitely subscribed
Posted via Mobile Device

[70chev383]

looks sweet man!!

[oldno7]

http://67-72chevytrucks.com/vboard/a...1&d=1366428701

Poochie, That is so funny stuff. My wife and I have been calling our youngest daughter that for about 3/4 years now. She's 8 and im not sure how or why we started calling her that. I can honestly say I never thought I would see that on a c-30

This is my new c-30 I should pick it up next weekend, The ignition was cut out of it for some unknown stupid reason, so I havn't heard it run or anything. I feel like im stealing it at $600.00, even if the motor is blown or the cluch is out of it im still getting a good price as far as im concerned. Not sure what the plan is for it just yet, I have to finish my c-10 first. Least I will have it for when im ready to dive in. The current bed will be sold and she will have some pretty polished rims. I might put a aluminum bed on it. I'd love to convert to a 4x4, but like I said it's gonna be about a year till i jump in. Good luck with yours keep us updated. oldno7

[cAlvis165]

You've got my attention now! Nice work. I'm subscribing to see it finished.



Chad

[moose1008]

Awesome build! Can't wait to see it finished. Have a similar build going on myself and i am really diggin the 4 link set up!

[moose1008]

Hey unclematt, I was wondering how long are the 4 link bars?
Posted via Mobile Device

[UncleMatt]

Originally Posted by MrBeast

What are your plans for a bed on it?

It'll be a low profile flat bed where the wheels stick up through.

[UncleMatt]

Originally Posted by moose1008

Hey unclematt, I was wondering how long are the 4 link bars?
Posted via Mobile Device

I made the bars 30 inches. But that's not including the ends so they're quite long. I'll have to take a measurement to be sure of the length.

[UncleMatt]

Went to Harry's U Pull it last week and picked up an Astro van hydra booster, all the power steering lines, and a drive shaft for only $50 bucks. Best part is after extending my wheel base the drive shaft I found is exactly the right length. I also picked up a disc/disc master cylinder from a 75 corvette. Can't wait to start putting my brakes together this week. I'm also working on my watts link to finish up the rear end. Pics to come soon!

[SCHRUMGMC]

Subscribed !!!

[502ms]

Looking good. BTW, if you need a rendering, check the fb page for this site. There is a gentleman named Chad that makes awesome 3d renderings and they are spectacular.
Posted via Mobile Device

[moose1008]

Originally Posted by UncleMatt

I made the bars 30 inches. But that's not including the ends so they're quite long. I'll have to take a measurement to be sure of the length.

Hey thanks man!
Posted via Mobile Device

[UncleMatt]

Originally Posted by oldno7

http://67-72chevytrucks.com/vboard/a...1&d=1366428701

Poochie, That is so funny stuff. My wife and I have been calling our youngest daughter that for about 3/4 years now. She's 8 and im not sure how or why we started calling her that. I can honestly say I never thought I would see that on a c-30

This is my new c-30 I should pick it up next weekend, The ignition was cut out of it for some unknown stupid reason, so I havn't heard it run or anything. I feel like im stealing it at $600.00, even if the motor is blown or the cluch is out of it im still getting a good price as far as im concerned. Not sure what the plan is for it just yet, I have to finish my c-10 first. Least I will have it for when im ready to dive in. The current bed will be sold and she will have some pretty polished rims. I might put a aluminum bed on it. I'd love to convert to a 4x4, but like I said it's gonna be about a year till i jump in. Good luck with yours keep us updated. oldno7

Wow, that's a smoking hot deal on your c-30! And it looks like it's in pretty good condition too. Chances are it won't take much to get 'er to run. Mine sat outside for 5 years and started right up with some new plugs and a battery.

[mr mike]

Work day





Posted via Mobile Device

[UncleMatt]

Originally Posted by moose1008

Hey thanks man!
Posted via Mobile Device

I measured the bars tonight. They are 35" long from center bolt holes.

[Emad Classic]

Originally Posted by oldno7

http://67-72chevytrucks.com/vboard/a...1&d=1366428701

Poochie, That is so funny stuff. My wife and I have been calling our youngest daughter that for about 3/4 years now. She's 8 and im not sure how or why we started calling her that. I can honestly say I never thought I would see that on a c-30

This is my new c-30 I should pick it up next weekend, The ignition was cut out of it for some unknown stupid reason, so I havn't heard it run or anything. I feel like im stealing it at $600.00, even if the motor is blown or the cluch is out of it im still getting a good price as far as im concerned. Not sure what the plan is for it just yet, I have to finish my c-10 first. Least I will have it for when im ready to dive in. The current bed will be sold and she will have some pretty polished rims. I might put a aluminum bed on it. I'd love to convert to a 4x4, but like I said it's gonna be about a year till i jump in. Good luck with yours keep us updated. oldno7

Hi dear,
do you whant to sale that truck?

[mr mike]

Hey Matt I think he wants to buy your truck lol
And just a hunch tells me he'll pay with an overseas cashier's check and he will send his delivery people to pick it up because he's too busy on the movie set making a movie right now To pick it up himself. Lol
Posted via Mobile Device

[gwars1306]

What's up uncle Mike are there any new pics or updates on your dually build
Posted via Mobile Device

[UncleMatt]

Ok, got some new updates coming your way. I've been working like a mad man on the truck lately. Oh how I love progress!!

Here's how the watts link came together. I stared at my diff cover for a while until I figured out how I was going to attach my center pivot.

Here are my center arm pieces before welding them together to make the center bar.

Posted via Mobile Device



I'm using a $10 s10 upper ball joint as the center pivot.

Posted via Mobile Device

I didn't have a tapered reamer but this step drill bit worked great for drilling the taper in the center pivot. (Ignore the ugly tack welds, my mig was out of gas)


Frame mount arm pivot brackets. I made them square and then decided to get fancy with the grinder and round the edges. By the time I'm done with this project I'm gonna be a grinder artist! I'll be at the fair beside the chainsaw guy carving bears.

Posted via Mobile Device

Here it is installed!


I'm super impressed with how we'll it works. It goes up and down with the full range of my bags and there is zero lateral movement in my axel. The best part is I built the whole thing for less than $100 bucks.

Posted via Mobile Device
Posted via Mobile Device

[gwars1306]

Mike excuse my last comment I read this thread wrong and thought it was uncle matts thread.
What your doing to this truck is awesome, In the thread about my 71dually I wasn't sure on my front tire size until I had read your thread and so I used the same size so thanks for that.
Posted via Mobile Device

[UncleMatt]

Originally Posted by gwars1306

Mike excuse my last comment I read this thread wrong and thought it was uncle matts thread.
What your doing to this truck is awesome, In the thread about my 71dually I wasn't sure on my front tire size until I had read your thread and so I used the same size so thanks for that.
Posted via Mobile Device

No problem, it is UncleMatt's thread. But Mike is my brother and on here a lot. We work on each others projects together along with a few other buddies all the time.
Posted via Mobile Device

[Rusbuilt]

Sweet work friend!
Posted via Mobile Device

[cAlvis165]

Very nice

[UncleMatt]

Here's another update for you. Mounted my hydrobooster and ran into a few problems along the way. This is what I did.

Here is my Booster, notice the position of the hole in the plate where the pushrod comes through.


Now notice the hole on my firewall and how they don't line up together.


So I decided to take of the plate from the booster and move the hole.




New hole lines up good.