Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
06-23-2017, 01:25 AM | #1 |
Registered User
Join Date: Jul 2015
Location: Milwaukie, Oregon
Posts: 115
|
Re: Project daily drivable 62 C20
Looking really really good!! Such a nice truck! I'm lucky I had the chance to see it in person, keep up the awesome work. Helps get me motivated to get back on mine. I've been working odd jobs and studying in order to pass the Oregon Electrician, General Journeyman License test, Twenty years in the trade and they don't accept California licenses in Oregon. Hopefully I'll have a good job soon and can spend some time and money on my old girl.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=675881 1972 C-10 SWB 1962 3/4 ton LWB 2011 GMC Sierra LML Z71 crewcab shortbed |
06-24-2017, 11:31 PM | #2 |
Senior Member
Join Date: Jul 2014
Location: Los Gatos, Ca.
Posts: 407
|
Re: Project daily drivable 62 C20
Hey there Ryan, thanks for stopping in.
A good day in the garage today. I got the new radiator in and finally got the fan shroud issue worked out. And it only took me three months. It seems that my old radiator going out last weekend turned out to be a good thing. The new radiator is much accepting to my old plan of using the 63-66 radiator shroud. So the new radiator is in as well as the well fitting adapted 63-66 shroud. New rad installed - To get decent clearance to the water pump pulley and also to be able install or remove the fan, I had to trim one and a half inches from the fan opening - Then set it in on the radiator and side baffles to mock up and get a final location. The fan in the pic came off of the 258 straight 6 that was in my 1990 Jeep Wrangler. It is the fan I settled on. It is 17 1/4 inches across and fits in the opening with an inch gap to the shroud opening -
__________________
1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583 |
06-24-2017, 11:45 PM | #3 |
Senior Member
Join Date: Jul 2014
Location: Los Gatos, Ca.
Posts: 407
|
Re: Project daily drivable 62 C20
More mock up -
After settling on a final location for the shroud and marking the mounting baffles, drill some new holes in the shroud to match the mounting in the side baffles and screw in place - Final mounting -
__________________
1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583 |
07-30-2017, 06:53 AM | #4 |
Registered User
Join Date: Oct 2010
Location: Ocean Springs, MS
Posts: 1,746
|
Re: Project daily drivable 62 C20
Glad to see it back on the road!
__________________
Gary 1971 Chevrolet C/10 1951 GMC 100 1977 GMC C15 1955 Chevrolet 3100 |
07-30-2017, 02:04 PM | #5 |
Senior Member
Join Date: Jul 2014
Location: Los Gatos, Ca.
Posts: 407
|
Re: Project daily drivable 62 C20
Thanks fellas.
Fred, yes you can use the GM compressor. If you opt for using the GM unit, then your kit will come with the adapter fittings needed for the back of the compressor. I have not yet had the AC system charged up. I'm hoping to have that done in the next couple of weeks and then I'll report how well it works. I don't see any reason that it shouldn't work just fine. The heater part of the VA unit is working great.
__________________
1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583 |
08-25-2017, 11:28 PM | #6 |
Senior Member
Join Date: Jul 2014
Location: Los Gatos, Ca.
Posts: 407
|
Re: Project daily drivable 62 C20
Well I think an update is in order. In the last update I was going to get the AC charged up, fix the intake manifold leak and deal with the steering play. I dropped the truck at a friends shop for the work.
The AC system was charged up and then let sit overnight. The next morning the system was empty. Charged it up again but with some dye this time. Discovered major leak from the compressor. New compressor and now AC system working great. Intake manifold re-sealed and cleared out the completely clogged up EGR passage. Cross this one off the list. While at the shop one of the rear wheel cylinders decided to start leaking. Replaced both and turned the drums. This truck is very light on the rear axle and it was easy to lock up the rear wheels. Backed the shoes off a little bit and along with the trued up drums and big disc's up front, the braking performance is impressive. Smooth, straight and predictable. We replaced the steering box with a normal replacement box for a 72 C20 and I like it a lot better than the CPP box. It has better power assist and a better ratio for this truck. However, the truck still has too much wander for my taste. Also, instead of putting it on the trailer, I decided to drive it home. It is about 20 miles from the shop to my house with about half of that is a curvy mountain highway. This is the longest trip so far and it was a white knuckle journey up the mountain. In the turns it felt like the truck wanted to swap ends. This truck has some handling issues to be worked out. A lot of the handling problems can certainly be linked to the rear suspension. All of these parts are probably original. I'm sure 40+ years of carrying a cab-over camper has taken a toll on these parts. I know the trailing arm and trackbar bushings are shot after all these years. I've received new trailing arms, coil springs and an adjustable trackbar and will be this weeks project.
__________________
1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583 |
09-10-2017, 12:39 AM | #7 |
Senior Member
Join Date: Jul 2014
Location: Los Gatos, Ca.
Posts: 407
|
Re: Project daily drivable 62 C20
Last update I was fighting steering and handling issues. Well, that has been solved and it was all my fault! Yep. I installed the steering center link backwards. This creates weird handling problems and steering play. So FYI, the inner tie rod ends should come in from the back of the center link, not go in thru the front. After rolling it 180 degrees and having the truck re-aligned, it handles great now. Just like I thought it should. I found the answer over in the 67-72 section. There are several posts about this installation mistake.
The windshield is now installed correctly. I brought the truck to Tri-Valley Auto Glass in Pleasanton, Ca. One guy re-installed it by himself. With all the vintage vehicles in their shop I knew I was in the right place for this job. Highly recommended if you live in the Bay Area. Got the rear suspension finished up. New trailing arms, springs, shocks and adjustable panhard bar. Truck is nice and tight front to back. Also picked up this little gem. An Alaskan 8 foot cab-over, 1976 vintage. Nice original condition and needs a little TLC, but excellent bones. Having a camper for this truck is really the main reason for this build. I'm planning a road trip through Oregon next year, early summer or fall.
__________________
1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583 |
09-10-2017, 09:23 AM | #8 |
Registered User
Join Date: Sep 2012
Location: Midway, NC
Posts: 3,275
|
Re: Project daily drivable 62 C20
Digging the shell.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC |
09-10-2017, 12:48 PM | #9 |
Registered User
Join Date: Jul 2015
Location: Milwaukie, Oregon
Posts: 115
|
Re: Project daily drivable 62 C20
Looking very very nice!!!! Digging the camper too.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=675881 1972 C-10 SWB 1962 3/4 ton LWB 2011 GMC Sierra LML Z71 crewcab shortbed |
09-10-2017, 01:27 PM | #10 |
Registered User
Join Date: May 2006
Location: lake havasu city, az
Posts: 129
|
Re: Project daily drivable 62 C20
I love it too.
|
09-10-2017, 10:03 PM | #11 |
Senior Member
Join Date: Jul 2014
Location: Los Gatos, Ca.
Posts: 407
|
Re: Project daily drivable 62 C20
Thanks for the comments fellas.
I found out that my tires are too big with that load in the bed. They are rubbing the front lip of the fender. The tires are Firestone Trans-force in a size 235/85-16. I think a 215 would be just right. The next phase of this project was supposed to be the doors. But I think the rear end needs to come before the doors. The stock rear gears are unusable for the highway. So I'm going to do the rear axle swap sooner rather than later and go with 3.73 ring & pinion and an ARB locking diff. Also, the axle I have to replace the Eaton is a Dana 60. I believe it is a bit wider and could cause more tire fitment problems. More snowballs.
__________________
1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583 |
09-11-2017, 12:03 AM | #12 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: Project daily drivable 62 C20
I'm liking the camper also.
If you need trailing arm mounts for your Dana 60 I make those as well.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
09-11-2017, 12:12 AM | #13 |
Senior Member
Join Date: Jul 2014
Location: Los Gatos, Ca.
Posts: 407
|
Re: Project daily drivable 62 C20
Thanks Cap, but I already have a set of your D60 mounts. So I'm good to go there.
__________________
1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583 |
10-22-2017, 10:59 PM | #14 |
Senior Member
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,968
|
Re: Project daily drivable 62 C20
wow, just seeing the whole thread start to finish - GREAT build, really like all the attn to detail.
|
10-23-2017, 10:03 PM | #15 |
Senior Member
Join Date: Jul 2014
Location: Los Gatos, Ca.
Posts: 407
|
Re: Project daily drivable 62 C20
Thank you Jocko for the compliment. This has been the biggest automotive project to date that I've undertaken and there were times I really thought that I bit off more than I could chew. Still some more to do and hopefully by late spring it should be mostly done. But they're never really done, are they?
Right now the truck is basically a mule so I can move the Alaskan around while I re-seal it. Then I will move it over to my new acquisition that I special ordered this past July. It finally arrived last week and I picked it up Saturday. It is a real beauty. When it comes to vintage trucks, I'm all GM. New is a different story. I just have to show it off, so keep an open mind. Brand new special ordered F-250 4x4 -
__________________
1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583 |
02-10-2018, 12:50 AM | #16 |
Senior Member
Join Date: Jul 2014
Location: Los Gatos, Ca.
Posts: 407
|
Re: Project daily drivable 62 C20
Time for a quick update since I'm finally ready for the next big mod on the 62.
I've had a Dana 60 rear axle swap on the schedule and the axle is now built. Complete new internals from end to end. The gears are 3.73 with a true-trac limited slip differential. I hope to have this axle installed within the next 2-3 weeks. And even though I don't own a welder or know how to weld. I guess it is about time to learn how to weld and try to tackle the job myself. I'm using Captain Fab's trailing arm mounts which are 1/8 inch steel. If I decide to do this job myself, what kind of welder would be right for jobs like this? Captain? Since my last entry I've logged 125 miles of test driving. The only thing that has come up is an annoying drive-line vibration between 35 and about 48 mph in fourth gear. I'll address this when I do the axle swap. All other systems working great.
__________________
1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583 |
02-10-2018, 03:36 PM | #17 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: Project daily drivable 62 C20
To clarify, my trailing arm mounts are fabricated from 3/16" steel. You will need a welder capable of about 150 amps. You might also consider just tacking them in place yourself at the correct spacing and pinion angle and then taking the entire assembly to a professional welder for the final welding.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
02-25-2018, 09:28 PM | #18 |
Senior Member
Join Date: Jul 2014
Location: Los Gatos, Ca.
Posts: 407
|
Re: Project daily drivable 62 C20
Yes Capt. you're right. I need to remember to put on my glasses when using the tape measure. Your suggestion is good. I'm presently setting up the electrical service in my garage for a 220v welder so I can do this kind of work myself. But for this axle swap a friend of mine is going to come up and do the final welding work.
In the meantime I'm just crossing minor things off my to-do-list. This weekend I fashioned up semi permanent back up and license plate lights. These will likely be changed when I decide on what kind of rear bumper to use. My truck did not come with factory reverse lights. I don't even know if they were an option in 1962. So for reverse light on/off switching I used an push-pull switch I kept from old truck I had some years back. I figured the shift lever would be good place to mount it. Thanks till next time
__________________
1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583 |
02-25-2018, 09:38 PM | #19 |
high-Tech Red Neck
Join Date: Feb 2008
Location: Livingston, MT/On my boat WA/BC/AK
Posts: 2,294
|
Re: Project daily drivable 62 C20
Nice truck, love how it is turning out. If you make it up towards Tacoma this summer on your road trip let me know!
__________________
"He used to be a pretty nice feller, now he's a welder!" |
03-18-2018, 10:48 PM | #20 |
Hollister, CA.
Join Date: Sep 2006
Location: Hollister, Ca.
Posts: 6,147
|
Re: Project daily drivable 62 C20
Wow.....what a beautiful truck !!!
(That 62 isnt bad either... )
__________________
John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" |
03-23-2018, 09:00 AM | #21 |
Hollister, CA.
Join Date: Sep 2006
Location: Hollister, Ca.
Posts: 6,147
|
Re: Project daily drivable 62 C20
Well, I'm here to provide another update to this build.
C-10's often visit my shop for custom work, but it is a rare site to see a C-20 as CLEAN as this one roll in !! It was a treat to have one of my favorite type of rigs in for the DANA60 swap...
__________________
John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" |
03-23-2018, 09:23 AM | #22 |
Hollister, CA.
Join Date: Sep 2006
Location: Hollister, Ca.
Posts: 6,147
|
Re: Project daily drivable 62 C20
We got it on the lift ... and out with the old ....
- - - - - - - -
__________________
John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" |
03-23-2018, 09:43 AM | #23 |
Hollister, CA.
Join Date: Sep 2006
Location: Hollister, Ca.
Posts: 6,147
|
Re: Project daily drivable 62 C20
Next we set up the axles next to each other to measure for pinion angle...With the pads level, I record the measurement at the pinion.
Using some scrap tubing, I build a mockup "pad locator", which includes a locator for the track bar mount. This keeps everything in check... - - - - - - - - - - - - - - - -
__________________
John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" |
04-13-2018, 09:53 PM | #24 |
But Found Her 25yrs Later!
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,526
|
Re: Project daily drivable 62 C20
I just came across this thread.
I really really like the direction you went with your truck!
__________________
I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 |
04-14-2018, 08:14 AM | #25 |
Registered User
Join Date: Apr 2008
Location: Md
Posts: 2,477
|
Re: Project daily drivable 62 C20
Fantastic!
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=635605 |
Bookmarks |
|
|