new member, old project, some pics, and a 3 week deadline - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

arkracing · 12-14-2004, 12:48 PM

what color blue is it??????

I didn't think there were filters like that that filter isoc's - haha but i guess it is better than nothing...
well actually maybe you should have left it off...you could have cleared the tar from the smokes and the paint that's in your lungs...bet that would make a cool x-ray

>]{roo]{ed< · 12-14-2004, 03:22 PM

The respirator is a 3M 7193, which protects against organic vapor, obviously a full face fresh air supplied respirator would be the way to go, but for the common person wanting to spray his/her truck, this respirator will work fine. Pre-filters are in place to stop the heavy particles of overspray, while carbon cartridges filter out the organic vapors. This is a DISPOSABLE RESPIRATOR and should NOT be used more than a handfull of times before being thrown away. Of the body shops that I sell to here in Baton Rouge, 80% use the 3M 7193 or 7192 (size difference), while the other 20% use an air supplied respirator. I just can't stand dragging an extra hose through a wet panel of clear.

>]{roo]{ed< · 12-14-2004, 03:31 PM

I started with a blue off of a '98 mitsubishi mirage, and added a few more tints and pearls to create a unique color.

>X< · 12-14-2004, 06:52 PM

i didnt believe it, i even made a bet with my other friend that chris would get runs, but he layed it out like glass and no runs. in friggin 50 degree weather. i guess he played junior chemist with the mixing ratios or something

71Chevy4-speed · 12-15-2004, 01:13 AM

that paint job looks SSSSSSSSSSWWWWWEEEEEEEEETTTTTTT!!!!!!! I love the airbrushing and the two tone like that, hit dead on with the blue also. Really nice looking truck, very different and unique.

sixty8c10 · 12-15-2004, 08:41 AM

one word, wow.

i'm gonna be needing some airbrush work some time in the not so near future, you available?

Bamm · 12-15-2004, 06:02 PM

You need to snap some "finished" pics for us.........Jerry

>X< · 12-15-2004, 08:09 PM

sixtyeightc10, sure, where you at? i'm in BR

sixty8c10 · 12-16-2004, 12:39 AM

i'm livin about 15 min south of ft polk ....it'll be awhile..a good while i'll send you pm when i'm ready....how's that?

>X< · 12-16-2004, 07:55 PM

sounds good. if you're ever in BR stop by the Dupont paint store and check out chris' truck in person

longnlow72 · 12-16-2004, 09:33 PM

Sweet!

sixty8c10 · 12-16-2004, 10:11 PM

it gonna be an even longer while now....i just got orders to go virginia for 4 months, leave mid jan

67cst · 12-16-2004, 10:16 PM

looks nice! but whats with the overspray on the rad support?

>]{roo]{ed< · 12-17-2004, 03:09 AM

putting in a new one

meathead95 · 12-29-2004, 05:31 PM

any out of the garage/complete pics yet?

Bamm · 12-29-2004, 05:45 PM

sixty8c10 - Once you get up here in God's country, you could probably bribe Randy with a few dozen cold ones, maybe he'll break out the airbrush kit...........Jerry

>X< · 12-30-2004, 12:58 AM

back together, getting rims from his 98, and new grill/bumper soon. he put in a hopped up 350 sb/turbo350 this week.

68w/sbc406 · 12-30-2004, 01:04 AM

all that work on a truck with a sun roof???

>X< · 12-30-2004, 01:16 AM

yeah, i know, ugliest thing ever. it was there when i bought it, i think chris is getting a new one put in so at least it will be functional.

>X< · 12-30-2004, 01:19 AM

more pics (excuse the buffing compound dust and ****ty bedliner, i think he plans on linex or something)

>X< · 12-30-2004, 01:21 AM

.................

TugOwar · 12-30-2004, 01:29 AM

Truck is looking very nice dude! Keep us updated.

67ChevyC10Stepside · 12-30-2004, 01:40 AM

wth is wrong with the white paint on the roof and door?

>]{roo]{ed< · 12-30-2004, 02:45 AM

camera must have done something funny, or its just dew. It is all as slick as the hood.

sixty8c10 · 12-30-2004, 11:29 AM

bamm 24,
thanx for the offer, but i still gotta get it painted

12-14-2004, 12:48 PM	#76
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	what color blue is it?????? I didn't think there were filters like that that filter isoc's - haha but i guess it is better than nothing... well actually maybe you should have left it off...you could have cleared the tar from the smokes and the paint that's in your lungs...bet that would make a cool x-ray __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered

12-14-2004, 06:52 PM	#79
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	i didnt believe it, i even made a bet with my other friend that chris would get runs, but he layed it out like glass and no runs. in friggin 50 degree weather. i guess he played junior chemist with the mixing ratios or something __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

12-15-2004, 01:13 AM	#80
71Chevy4-speed Speed Limit = Floorboard Join Date: Jan 2004 Location: Kasilof, Alaska Posts: 803	that paint job looks SSSSSSSSSSWWWWWEEEEEEEEETTTTTTT!!!!!!! I love the airbrushing and the two tone like that, hit dead on with the blue also. Really nice looking truck, very different and unique. __________________ 1971 C20 350, 4-speed - Sold. 1985 K10 350, Built 700r4, Edel 1406, Performer intake, MSD Ign, Hooker Comps, Silverstars, Piaa drivers, LED tails, Toyo A/T 31's, Eaton Posi, the project. "Build for torque, horsepower will follow"

12-15-2004, 08:41 AM	#81
sixty8c10 MY EX DRIVES A BROOM Join Date: Nov 2003 Location: Herington, KS Posts: 869	one word, wow. i'm gonna be needing some airbrush work some time in the not so near future, you available? __________________ They say nobody's perfect. I'm a nobody, so I must be perfect. Building Nemo -1968 C10 Long Bed FRED -1947 KB-2 International

12-15-2004, 06:02 PM	#82
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	You need to snap some "finished" pics for us.........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

12-14-2004, 03:22 PM	#77
>]{roo]{ed< Registered User Join Date: Nov 2004 Location: Baton Rouge Posts: 16	The respirator is a 3M 7193, which protects against organic vapor, obviously a full face fresh air supplied respirator would be the way to go, but for the common person wanting to spray his/her truck, this respirator will work fine. Pre-filters are in place to stop the heavy particles of overspray, while carbon cartridges filter out the organic vapors. This is a DISPOSABLE RESPIRATOR and should NOT be used more than a handfull of times before being thrown away. Of the body shops that I sell to here in Baton Rouge, 80% use the 3M 7193 or 7192 (size difference), while the other 20% use an air supplied respirator. I just can't stand dragging an extra hose through a wet panel of clear.

12-14-2004, 03:31 PM	#78
>]{roo]{ed< Registered User Join Date: Nov 2004 Location: Baton Rouge Posts: 16	I started with a blue off of a '98 mitsubishi mirage, and added a few more tints and pearls to create a unique color.

12-15-2004, 08:09 PM	#83
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	sixtyeightc10, sure, where you at? i'm in BR __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

12-16-2004, 12:39 AM	#84
sixty8c10 MY EX DRIVES A BROOM Join Date: Nov 2003 Location: Herington, KS Posts: 869	i'm livin about 15 min south of ft polk ....it'll be awhile..a good while i'll send you pm when i'm ready....how's that? __________________ They say nobody's perfect. I'm a nobody, so I must be perfect. Building Nemo -1968 C10 Long Bed FRED -1947 KB-2 International

12-16-2004, 07:55 PM	#85
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	sounds good. if you're ever in BR stop by the Dupont paint store and check out chris' truck in person __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

12-16-2004, 09:33 PM	#86
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	Sweet! __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

12-16-2004, 10:11 PM	#87
sixty8c10 MY EX DRIVES A BROOM Join Date: Nov 2003 Location: Herington, KS Posts: 869	it gonna be an even longer while now....i just got orders to go virginia for 4 months, leave mid jan __________________ They say nobody's perfect. I'm a nobody, so I must be perfect. Building Nemo -1968 C10 Long Bed FRED -1947 KB-2 International

12-16-2004, 10:16 PM	#88
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	looks nice! but whats with the overspray on the rad support? __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

12-17-2004, 03:09 AM	#89
>]{roo]{ed< Registered User Join Date: Nov 2004 Location: Baton Rouge Posts: 16	putting in a new one

12-29-2004, 05:31 PM	#90
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	any out of the garage/complete pics yet? __________________ 72 2wd blazer 72 swb 4x4



Register or Log In To remove these advertisements.

12-29-2004, 05:45 PM	#91
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	sixty8c10 - Once you get up here in God's country, you could probably bribe Randy with a few dozen cold ones, maybe he'll break out the airbrush kit...........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

12-30-2004, 12:58 AM	#92
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	back together, getting rims from his 98, and new grill/bumper soon. he put in a hopped up 350 sb/turbo350 this week. Attached Images __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

12-30-2004, 01:04 AM	#93
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	all that work on a truck with a sun roof??? __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

12-30-2004, 01:16 AM	#94
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	yeah, i know, ugliest thing ever. it was there when i bought it, i think chris is getting a new one put in so at least it will be functional. __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

12-30-2004, 01:19 AM	#95
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	more pics (excuse the buffing compound dust and ****ty bedliner, i think he plans on linex or something) Attached Images __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

12-30-2004, 01:21 AM	#96
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	................. Attached Images __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

12-30-2004, 01:29 AM	#97
TugOwar Registered User Join Date: Sep 2004 Location: Pleasanton, TX Posts: 1,723	Truck is looking very nice dude! Keep us updated.

12-30-2004, 01:40 AM	#98
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,032	wth is wrong with the white paint on the roof and door? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

12-30-2004, 02:45 AM	#99
>]{roo]{ed< Registered User Join Date: Nov 2004 Location: Baton Rouge Posts: 16	camera must have done something funny, or its just dew. It is all as slick as the hood.

12-30-2004, 11:29 AM	#100
sixty8c10 MY EX DRIVES A BROOM Join Date: Nov 2003 Location: Herington, KS Posts: 869	bamm 24, thanx for the offer, but i still gotta get it painted __________________ They say nobody's perfect. I'm a nobody, so I must be perfect. Building Nemo -1968 C10 Long Bed FRED -1947 KB-2 International

Register or Log In To remove these advertisements.