Project '54 5W Chevy HELP PLEASE!! - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Daniel U · 11-26-2006, 03:21 AM

When finished, the tank will have 2 baffles and will be fitted below the wood bed with a chrome access door for re-fueling. Should look and perform well. I'm anxoius! Paul is going on vacation for a week, so no more progress for about 8 days.

He said we'll get started on the TCI front end when he gets back!

Daniel U · 12-12-2006, 03:36 AM

Here's some shots of the custom 20+ gallon tank set up for TPI.....

pgf545 · 12-12-2006, 08:07 AM

Daniel, Glad to see you are still around...lol. I was just thinking the other day that I hadn't seen you on in a while. Tank is looking good and things are coming along nice.

Bernie

texascowboy593 · 12-12-2006, 09:14 AM

Looking good Daniel!

Daniel U · 12-13-2006, 05:25 PM

Thanks guys, I've just been busy with overtime. Paul's been away for a week, so it's time to get crack'en again! I'll try to stop by when the front end comes off and the TCI front end is put on. Should be soon! Daniel U

Daniel U · 12-18-2006, 03:41 AM

So here's the finished tank. The front end comes off tommoro and the new TCI goes on(cross your fingers). Should have some more pics by then. Enjoy these.....

Daniel U · 12-18-2006, 03:44 AM

a couple more...

Daniel U · 12-18-2006, 01:44 PM

THE PACER FRONT END IS OFF! I should have some more pics with the new TCI front end on by tonight.

Daniel U · 12-18-2006, 09:51 PM

Nearly complete(- the motor mounts) here are the new front end pics as promised....

Daniel U · 12-18-2006, 09:56 PM

......and the driver's side + a pic of my 2 1/2 year old son, Dom. The chassis should be all done tomorro. Then strip down and ready for paint/final assembly!

Daniel U · 12-21-2006, 03:18 AM

More pics for your viewing pleasure....TCI front end in complete.(Steel braided brake lines!) Might have some more pics up at the end of the week dressed in all black with the springs and wheels.

CAL 58 GMC · 12-22-2006, 11:38 AM

Looking really good Daniel!! Did you install the Mustang II unit? Did the C-notch come with it? Anyway nice job and Keep up the good work.

Daniel U · 12-23-2006, 04:02 AM

Yes, the one from TCI came with the C notch. It is designed after the mudstane II front end.

54chevy · 01-04-2007, 08:13 PM

Just finished reading all of your posts and I must say I am getting so many ideas. I haven't posted a build page yet b/c I am still in the planning stages. When I get started I will post pics, until then I am reading and looking at as mnay pics as I can as I seek to create my dream ride. Keep up the good work.

54chevyls1 · 01-04-2007, 08:34 PM

I am using the MII from TCI on my 54 as well. I located the C-notch where they said too, but mine didn't line up with the rack and pinion worth a crap. Did you use the spacers? My rack is way forward of the c-notch.

Daniel U · 01-06-2007, 02:35 PM

Some more pics...Notice these are the factory short bed sides with the correct stampings. Not aftermarket ones. Many '54 parts are hard to come by if you are trying to maintain a factory(ish) look. $$$$$$

Daniel U · 01-06-2007, 02:40 PM

Quote:

Originally Posted by 54chevy

Just finished reading all of your posts and I must say I am getting so many ideas. I haven't posted a build page yet b/c I am still in the planning stages. When I get started I will post pics, until then I am reading and looking at as mnay pics as I can as I seek to create my dream ride. Keep up the good work.

Good luck! You should find lots of ideas here. Shows are also a great place. Looking forward to seeing your project evolve. I started out wanting a OEM resto. As you can see, the build took on a life of it's own.

pgf545 · 01-06-2007, 02:43 PM

Looking good Daniel. Looks like you might be getting some of that funny looking stuff on there pretty soon....what do you call it???....Paint...yeah that's it. I haven't seen a painted project around the house in a while if you can't tell.

Bernie

Daniel U · 01-06-2007, 02:53 PM

Quote:

Originally Posted by 54chevyls1

I am using the MII from TCI on my 54 as well. I located the C-notch where they said too, but mine didn't line up with the rack and pinion worth a crap. Did you use the spacers? My rack is way forward of the c-notch.

I'll have to ask Paul and get back to you. I decided to have my truck finished by a "PRO" for a few diferent reasons. So to be honest with you I don't know. Give me a few days to get back to you as I'm busy with O.T. to pay for his work!

Daniel U · 01-06-2007, 02:58 PM

Quote:

Originally Posted by pgf545

Looking good Daniel. Looks like you might be getting some of that funny looking stuff on there pretty soon....what do you call it???....Paint...yeah that's it. I haven't seen a painted project around the house in a while if you can't tell.

Bernie

I'm going to look at paint chips with my brother on Mon. He paints cars for a living. I just don't like to mix business and famiy. It should be a GM color. I'm looking for a dark green metallic. Kinda like the stock "Juniper" with metallic. I believe my truck was originally a red, then blue, then mint green, then yellow(based on the grinding I did originally on the tailgate). Everything should be wrapped in primer soon!

Kid · 01-07-2007, 09:40 PM

Your tank looks real good Daniel, (whole project looks great) did you go with an in tank pump? What gage metal did you use?

pgf545 · 01-07-2007, 10:40 PM

54Chevyls1, I took a shot of our Heidts crossmember and it has spacers between the crossmember and the rack. It is not completely tightened yet so it does not look centered in the c-notch.

Bernie

P.S. Daniel sorry about hijacking your thread.

Daniel U · 01-10-2007, 04:45 PM

A quick update (and pics) before I start my double shifts at work.....Grilles in more fitment. Hood/fenders are being fitted as well. Chrome turned out GREAT! I'm happy with the way the Must.II front end makes the front wheels look. I should be able to run a wider front wheel than before. Also, the fuel and brake lines are finished.

Daniel U · 01-10-2007, 04:52 PM

A few more pics for the junkies around here.....

Kabwe · 01-10-2007, 08:28 PM

looking good man

11-26-2006, 03:21 AM	#76
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: Project '54 5W Chevy HELP PLEASE!! When finished, the tank will have 2 baffles and will be fitted below the wood bed with a chrome access door for re-fueling. Should look and perform well. I'm anxoius! Paul is going on vacation for a week, so no more progress for about 8 days. He said we'll get started on the TCI front end when he gets back! __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

12-12-2006, 03:36 AM	#77
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: Project '54 5W Chevy HELP PLEASE!! Here's some shots of the custom 20+ gallon tank set up for TPI..... Attached Images __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

12-12-2006, 08:07 AM	#78
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: Project '54 5W Chevy HELP PLEASE!! Daniel, Glad to see you are still around...lol. I was just thinking the other day that I hadn't seen you on in a while. Tank is looking good and things are coming along nice. Bernie __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021

12-12-2006, 09:14 AM	#79
texascowboy593 Registered User Join Date: Dec 2004 Location: Southeast Tx Posts: 1,302	Re: Project '54 5W Chevy HELP PLEASE!! Looking good Daniel! __________________ "The rays of light thru the Shiner Bock bottle make me wanna turn the key and put down the throttle...and get lost down 35" - Jason Boland www.YouTube.com/user/593Films - Watch My Videos! 1977 Silverado K10 2014 Dodge Durango (Wife-mobile) 2008 Dodge Ram Lone Star Edition (Daily driver)

12-13-2006, 05:25 PM	#80
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: Project '54 5W Chevy HELP PLEASE!! Thanks guys, I've just been busy with overtime. Paul's been away for a week, so it's time to get crack'en again! I'll try to stop by when the front end comes off and the TCI front end is put on. Should be soon! Daniel U __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe Last edited by Daniel U; 12-13-2006 at 05:26 PM.

12-18-2006, 03:41 AM	#81
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: Project '54 5W Chevy HELP PLEASE!! So here's the finished tank. The front end comes off tommoro and the new TCI goes on(cross your fingers). Should have some more pics by then. Enjoy these..... Attached Images __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

12-18-2006, 03:44 AM	#82
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: Project '54 5W Chevy HELP PLEASE!! a couple more... Attached Images __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

12-18-2006, 01:44 PM	#83
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: Project '54 5W Chevy HELP PLEASE!! THE PACER FRONT END IS OFF! I should have some more pics with the new TCI front end on by tonight. Attached Images __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

12-18-2006, 09:51 PM	#84
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: Project '54 5W Chevy HELP PLEASE!! Nearly complete(- the motor mounts) here are the new front end pics as promised.... Attached Images __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

12-18-2006, 09:56 PM	#85
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: Project '54 5W Chevy HELP PLEASE!! ......and the driver's side + a pic of my 2 1/2 year old son, Dom. The chassis should be all done tomorro. Then strip down and ready for paint/final assembly! Attached Images __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

12-21-2006, 03:18 AM	#86
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: Project '54 5W Chevy HELP PLEASE!! More pics for your viewing pleasure....TCI front end in complete.(Steel braided brake lines!) Might have some more pics up at the end of the week dressed in all black with the springs and wheels. Attached Images __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe Last edited by Daniel U; 12-21-2006 at 03:19 AM.

12-22-2006, 11:38 AM	#87
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: Project '54 5W Chevy HELP PLEASE!! Looking really good Daniel!! Did you install the Mustang II unit? Did the C-notch come with it? Anyway nice job and Keep up the good work. __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4 Last edited by CAL 58 GMC; 12-22-2006 at 11:44 AM.

12-23-2006, 04:02 AM	#88
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: Project '54 5W Chevy HELP PLEASE!! Yes, the one from TCI came with the C notch. It is designed after the mudstane II front end. __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

01-04-2007, 08:13 PM	#89
54chevy Registered User Join Date: Dec 2006 Location: Memphis,TN Posts: 8	Re: Project '54 5W Chevy HELP PLEASE!! Just finished reading all of your posts and I must say I am getting so many ideas. I haven't posted a build page yet b/c I am still in the planning stages. When I get started I will post pics, until then I am reading and looking at as mnay pics as I can as I seek to create my dream ride. Keep up the good work.

01-04-2007, 08:34 PM	#90
54chevyls1 Registered User Join Date: Dec 2006 Location: Tampa, FL Posts: 8	Re: Project '54 5W Chevy HELP PLEASE!! I am using the MII from TCI on my 54 as well. I located the C-notch where they said too, but mine didn't line up with the rack and pinion worth a crap. Did you use the spacers? My rack is way forward of the c-notch. __________________



Register or Log In To remove these advertisements.

01-06-2007, 02:35 PM	#91
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: Project '54 5W Chevy HELP PLEASE!! Some more pics...Notice these are the factory short bed sides with the correct stampings. Not aftermarket ones. Many '54 parts are hard to come by if you are trying to maintain a factory(ish) look. $$$$$$ Attached Images __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe Last edited by Daniel U; 01-06-2007 at 02:38 PM.

01-06-2007, 02:43 PM	#93
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: Project '54 5W Chevy HELP PLEASE!! Looking good Daniel. Looks like you might be getting some of that funny looking stuff on there pretty soon....what do you call it???....Paint...yeah that's it. I haven't seen a painted project around the house in a while if you can't tell. Bernie __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021

01-07-2007, 09:40 PM	#96
Kid Senior Member Join Date: Jun 2002 Location: Kansas Posts: 702	Re: Project '54 5W Chevy HELP PLEASE!! Your tank looks real good Daniel, (whole project looks great) did you go with an in tank pump? What gage metal did you use? __________________ The kid Build threads: 51 Jimmy http://67-72chevytrucks.com/vboard/s...d.php?t=154951 http://67-72chevytrucks.com/vboard/s...d.php?t=219902 http://www.classictrucks.com/feature...uck/index.html 68 C10 http://67-72chevytrucks.com/vboard/s...ad.php?t=50348

01-07-2007, 10:40 PM	#97
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: Project '54 5W Chevy HELP PLEASE!! 54Chevyls1, I took a shot of our Heidts crossmember and it has spacers between the crossmember and the rack. It is not completely tightened yet so it does not look centered in the c-notch. Bernie P.S. Daniel sorry about hijacking your thread. Attached Images __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021

01-10-2007, 04:45 PM	#98
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: Project '54 5W Chevy HELP PLEASE!! A quick update (and pics) before I start my double shifts at work.....Grilles in more fitment. Hood/fenders are being fitted as well. Chrome turned out GREAT! I'm happy with the way the Must.II front end makes the front wheels look. I should be able to run a wider front wheel than before. Also, the fuel and brake lines are finished. Attached Images __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe Last edited by Daniel U; 01-15-2007 at 03:15 AM.

01-10-2007, 04:52 PM	#99
Daniel U Registered User Join Date: Oct 2006 Location: Central Coast, CA. Posts: 1,202	Re: Project '54 5W Chevy HELP PLEASE!! A few more pics for the junkies around here..... Attached Images __________________ Mom's 1954 (TBI 5.7/700R4/14 bolt 4:10) 5 Chevrolet window 3/4 ton long bed Pick up build thread ->http://www.67-72chevytrucks.com/vboa...d.php?t=228674 My 1954 (TPI 5.7/700R4/10 bolt 3:73) Chevrolet 5 window 1/2 ton short bed Pick up build thread->http://67-72chevytrucks.com/vboard/s...3&goto=newpost 1960 (400/T350/?) Apache 10 short/fleet side-big window 1973 (TPI 5.7/700R4/14 bolt 4:10 w DANA 60 front) Chevrolet Cheyenne 4X4 2013 (Vortec 5.3/6-speed 6L90 automatic) Sierra LT CREW CAB Doing my part to warm the globe

01-10-2007, 08:28 PM	#100
Kabwe Certified Car Nut Join Date: Jan 2005 Location: Inglewood, California Posts: 3,118	Re: Project '54 5W Chevy HELP PLEASE!! looking good man

Register or Log In To remove these advertisements.