heres my project it has a long ways to go. - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 01-23-2008, 01:31 PM

that sounds good glad to hear it's coming alone good.

billsbowtie · 02-10-2008, 03:00 PM

i got me some nos gm parts for it today. left and right ft. fenders and rad. suport, side markers with trim, upper sway bar bushings. here is a pic. of the bigger parts fenders are still in the boxes. all 3 pieces do have some surface rust from 25 years of storeage.

49m · 02-12-2008, 05:33 AM

Nice score on the parts

billsbowtie · 02-12-2008, 12:41 PM

billsbowtie · 02-12-2008, 12:42 PM

billsbowtie · 02-12-2008, 12:42 PM

billsbowtie · 02-12-2008, 12:42 PM

billsbowtie · 02-20-2008, 06:32 AM

i got me a nice used steering wheel for it today.

billsbowtie · 02-20-2008, 06:35 AM

i got these m/t valve covers and some spark plug wire holders a few weeks ago at a swap meet. but i hadn't maid my mind up if they were going on this project or not but i think they will.

RCbowtie69 · 02-22-2008, 07:18 AM

looks like you got some good parts, keep up the work, it's looking like you are making some head way.

billsbowtie · 02-22-2008, 07:49 AM

thanks

49m · 02-22-2008, 08:03 AM

You got some great parts their. have you finished the frame?

BarryB · 02-22-2008, 08:15 AM

Hey Bill, just caught wind of this thread. Makes me really want to get mine started. Especially since your doing yours outside like that.
Keep up the good work and keep us posted.

billsbowtie · 02-22-2008, 08:21 AM

i am going to try and get started back on it when the weather gets a little better. i am going to start with going over the frame 1 more time and get it ready for the frame sway bar brackets. it didn't come from the factory with one. for now i am still gathering parts up.

billsbowtie · 03-07-2008, 10:11 AM

i found me a little better bed so the other one is f/s on the parts board.

billsbowtie · 03-07-2008, 10:12 AM

billsbowtie · 03-30-2008, 10:16 AM

i got me a alum. intake will try to post a pic. soon. i am going to try and get the ft. end out from under one of my parts trucks that i will be useing in the next couple of weeks. and get it cleaned up and replace any parts that need replaceing. i would like to have rolling frame by summer.

billsbowtie · 04-01-2008, 05:28 AM

heres my intake.

billsbowtie · 04-09-2008, 04:12 AM

i got my ft. crossmember off my parts truck today that i will be useing on my project. unless theres something there i can't see yet. but it looked ok today .

01-23-2008, 01:31 PM	#76
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. that sounds good glad to hear it's coming alone good. __________________ i have 67/72 chevy truck parts f/s.

02-10-2008, 03:00 PM	#77
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. i got me some nos gm parts for it today. left and right ft. fenders and rad. suport, side markers with trim, upper sway bar bushings. here is a pic. of the bigger parts fenders are still in the boxes. all 3 pieces do have some surface rust from 25 years of storeage. __________________ i have 67/72 chevy truck parts f/s.

02-12-2008, 05:33 AM	#78
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: heres my project it has a long ways to go. Nice score on the parts __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

02-12-2008, 12:41 PM	#79
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. __________________ i have 67/72 chevy truck parts f/s.

02-12-2008, 12:42 PM	#80
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. __________________ i have 67/72 chevy truck parts f/s.

02-20-2008, 06:32 AM	#83
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. i got me a nice used steering wheel for it today. __________________ i have 67/72 chevy truck parts f/s.

02-20-2008, 06:35 AM	#84
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. i got these m/t valve covers and some spark plug wire holders a few weeks ago at a swap meet. but i hadn't maid my mind up if they were going on this project or not but i think they will. __________________ i have 67/72 chevy truck parts f/s.

02-22-2008, 07:18 AM	#85
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: heres my project it has a long ways to go. looks like you got some good parts, keep up the work, it's looking like you are making some head way.

02-22-2008, 07:49 AM	#86
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. thanks __________________ i have 67/72 chevy truck parts f/s.

02-22-2008, 08:03 AM	#87
49m Registered User Join Date: Aug 2007 Location: Turners Station,Ky Posts: 842	Re: heres my project it has a long ways to go. You got some great parts their. have you finished the frame? __________________ My Rides 1969 Mustang gt coupe 1971 Chevy Cheyenne 1986 Iroc camaro 1986 K10 Short Bed 1987 Iroc Camaro 1990 rs Camaro 1992 350 ss truck 1998 Honda Civic 2005 Ram 2500 Cummins My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=279831

02-22-2008, 08:15 AM	#88
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: heres my project it has a long ways to go. Hey Bill, just caught wind of this thread. Makes me really want to get mine started. Especially since your doing yours outside like that. Keep up the good work and keep us posted. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff!

02-22-2008, 08:21 AM	#89
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. i am going to try and get started back on it when the weather gets a little better. i am going to start with going over the frame 1 more time and get it ready for the frame sway bar brackets. it didn't come from the factory with one. for now i am still gathering parts up. __________________ i have 67/72 chevy truck parts f/s.

03-07-2008, 10:11 AM	#90
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. i found me a little better bed so the other one is f/s on the parts board. __________________ i have 67/72 chevy truck parts f/s.

03-07-2008, 10:12 AM	#91
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. __________________ i have 67/72 chevy truck parts f/s.

03-30-2008, 10:16 AM	#92
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. i got me a alum. intake will try to post a pic. soon. i am going to try and get the ft. end out from under one of my parts trucks that i will be useing in the next couple of weeks. and get it cleaned up and replace any parts that need replaceing. i would like to have rolling frame by summer. __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

04-01-2008, 05:28 AM	#93
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. heres my intake. __________________ i have 67/72 chevy truck parts f/s.

04-09-2008, 04:12 AM	#94
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: heres my project it has a long ways to go. i got my ft. crossmember off my parts truck today that i will be useing on my project. unless theres something there i can't see yet. but it looked ok today . __________________ i have 67/72 chevy truck parts f/s.

Register or Log In To remove these advertisements.