4-5-6 Chevy Truck parts - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*LILRED66* · 08-01-2008, 09:32 AM

Quote:

Originally Posted by Tim64

Tony,
Do you have any door mirrors?
Thanks,
Tim

Tim:

There are several different styles. Which style are you looking for? Do you need driver and passenger side? Please let me know and I will check my extra parts and see what I have.

Tim64 · 08-01-2008, 09:34 AM

Tony,

Yes, I need both sides. Let me know what types you have. I'm not set on any certain type, just want them to match.
Thanks,
Tim

*LILRED66* · 08-01-2008, 09:35 AM

Quote:

Originally Posted by Hillbilly Deluxe 65

howa bout a new or mint condtion hood for a 1965 chevy

please sen me a price with a few pics at loganzember@hotmail.com

thanks

I have a few extra hoods, but I wouldn't consider them new or mint condition. They are rust and dent free. A nice hood sheel is $175.00, plus $150.00 crating and shipping, via Greyhound.

Hillbilly Deluxe 65 · 08-01-2008, 01:00 PM

any chance i could see some pictures of the front of the best hood you got cause i just dont wanna spend the money to be in the same situation im already in

thanks alot,
LZ

Chuck78 · 08-09-2008, 05:16 PM

got any gauge clusters? I mainly need the part with the printed circuit. This is for a 62, as the 60-63 printed circuits have a lot of problems by design. I was told the 64-66 units were interchangeable, so I assume that means just the rear piece. Might need a fuel gauge also, have to troubleshoot that some more though.

Thanks!

Chuck

Chuck78 · 08-10-2008, 07:45 AM

I should add, a 62 GMC. Not sure on what units are interchangeable, but someone on the 60-66 GMC list informed me that the 60-62 printed circuit units had problems with the circuits, and the 64-66 were interchangeable. I saw a 62 Chevy cluster and it looked totally different from mine, and was wired, not printed circuit. Maybe it's just a GMC cluster that I am needing?

Thanks,

Chuck

65chevy4x4 · 08-10-2008, 08:21 AM

Tony I'am needing a rear yoke of a 4-speed trans with the floor hand brake'This is the yoke that bolts to the drum. Thanks

83burban · 08-11-2008, 01:48 AM

Tony, we spoke about a week ago about a bracket for the radiator and I asked if you had a piece of the E-Brake linkage. I haven't heard back from you, if you need me to send another copy of the email I can do that. I have the money ready and can send it as soon as I head back. Also, any posi-traction units (just the posi, not a complete axle)? You can email me kabrimberry@socal.rr.com if you would like - Kurt

*LILRED66* · 08-11-2008, 09:36 PM

Quote:

Originally Posted by Tim64

Tony,

Yes, I need both sides. Let me know what types you have. I'm not set on any certain type, just want them to match.
Thanks,
Tim

Tim:

How about the set on this truck. They are factory with the rectangular mirror heads. Take a look and let me know your thoughts.

The arms are painted to match the truck and the back of the mirror heads are a silver color from the factory.

*LILRED66* · 08-11-2008, 09:41 PM

Quote:

Originally Posted by Hillbilly Deluxe 65

any chance i could see some pictures of the front of the best hood you got cause i just dont wanna spend the money to be in the same situation im already in

thanks alot,
LZ

LZ:

Take a look at this one and let me know your thoughts.

*LILRED66* · 08-11-2008, 09:47 PM

Quote:

Originally Posted by Chuck78

got any gauge clusters? I mainly need the part with the printed circuit. This is for a 62, as the 60-63 printed circuits have a lot of problems by design. I was told the 64-66 units were interchangeable, so I assume that means just the rear piece. Might need a fuel gauge also, have to troubleshoot that some more though.

Thanks!

Chuck

Chuck:

Thanks for your interest in my 4-5-6 Chevy trucks parts. The gauge clusters of the '60-'63 and the '64-'66 are not interchangeable. The 4-5-6 Chevy truck gauge clusters are electrical, not printed circuit. I do not have any GMC or '60-'63 Chevy truck gauge clusters. Sorry I couldn't help you with this part, but please let me know if you need other 4-5-6 Chevy truck parts in the future.

*LILRED66* · 08-11-2008, 09:49 PM

Quote:

Originally Posted by 65chevy4x4

Tony I'am needing a rear yoke of a 4-speed trans with the floor hand brake'This is the yoke that bolts to the drum. Thanks

Dennis:

Thanks for your interest in my 4-5-6 Chevy truck parts. I don't have any rear yokes from a 4-speed with a floor hand brake. I think this is the set-up for a C30 because none of my C10 or C20 trucks have the floor hand brake.

*LILRED66* · 08-11-2008, 09:51 PM

Quote:

Originally Posted by 62c20

Tony, we spoke about a week ago about a bracket for the radiator and I asked if you had a piece of the E-Brake linkage. I haven't heard back from you, if you need me to send another copy of the email I can do that. I have the money ready and can send it as soon as I head back. Also, any posi-traction units (just the posi, not a complete axle)? You can email me kabrimberry@socal.rr.com if you would like - Kurt

Kurt:

Sorry for my delay in responding. I believe I have the e-brake linkage part you are after, however I would like to see a picture of the one you need or I can send you a picture of the one I have.

I don't have any posi units. Let me know your thoughts and I will proceed accordingly.

Tim64 · 08-13-2008, 07:20 AM

Hey Tony,
Those mirrors look nice. How much shipped to 45377?
Thanks,
Tim

*LILRED66* · 08-13-2008, 11:23 AM

Quote:

Originally Posted by Tim64

Hey Tony,
Those mirrors look nice. How much shipped to 45377?
Thanks,
Tim

Tim:

PM sent.

slickfaster · 11-27-2008, 12:23 AM

do you have trans linkage for saginaw 3sd, swaped mine out and its longer than the OG unit, my old linkage wont work, too short and it didnt come with trani shifter arms. Thank you

*LILRED66* · 11-27-2008, 09:24 AM

slickfaster:

I have what you need. How about $50.00, including shipping?

*LILRED66* · 12-11-2008, 06:43 AM

slickfaster in Redondo Beach:

Did you find what you needed? If not, let me know if I can help you with the three-speed shifter linkage or other 4-5-6 Chevy trucks parts in the future.

Happy Holidays!

bwkennedy · 12-18-2008, 09:43 PM

How bout a Driver door and a Passenger fender off a 66' C-10 to Tennessee 38501. Thanks, Bryan

fd1965 · 12-26-2008, 02:05 PM

I am looking for a hood for a 65 c-10

*LILRED66* · 12-26-2008, 02:31 PM

Quote:

Originally Posted by fd1965

I am looking for a hood for a 65 c-10

fd1965:

Thanks for your interest. I have several good hoods, however packaging & shipping would be cost prohibitive...I estimating in the $200.00-$225.00 range.

quickchevy · 12-26-2008, 06:25 PM

Also looking for repair parts for my bed.Rear bed corner section.If you go to paint and body.Then the post Help with bed repair you can see the pics.Thanks

*LILRED66* · 12-26-2008, 07:41 PM

Quote:

Originally Posted by quickchevy

Also looking for repair parts for my bed.Rear bed corner section.If you go to paint and body.Then the post Help with bed repair you can see the pics.Thanks

I don't have what you need, but you can get one from www.lmctruck.com for $79.95.

Sorry I couldn't help you with this item, but please let me know if I can help you with other 4-5-6 Chevy truck parts in the future.

TwoFiftyShifter · 12-26-2008, 08:54 PM

I need a solid complete running truck shipped to NY for less than $1000.

*LILRED66* · 12-27-2008, 12:21 AM

Quote:

Originally Posted by TwoFiftyShifter

I need a solid complete running truck shipped to NY for less than $1000.

Wow, I wish I could help you with this one. From Kansas City, it would cost $800.00-$1,000.00 to transport it to NY, approximately 1,200-1,400 miles depending on where you are in the state of NY.

Sorry, I don't have any such animal in my inventory. Happy Holidays.

08-01-2008, 09:34 AM	#77
Tim64 Registered User Join Date: Aug 2007 Location: Vandalia, Ohio Posts: 396	Re: 4-5-6 Chevy Truck parts Tony, Yes, I need both sides. Let me know what types you have. I'm not set on any certain type, just want them to match. Thanks, Tim

08-01-2008, 01:00 PM	#79
Hillbilly Deluxe 65 Wheelin' and Dealin' Join Date: Nov 2007 Location: poquoson va Posts: 320	Re: 4-5-6 Chevy Truck parts any chance i could see some pictures of the front of the best hood you got cause i just dont wanna spend the money to be in the same situation im already in thanks alot, LZ __________________ 1965 Chevy c-10 fleetside long bed with 06 gto LS2/T56 inside Porterbuilt Extreme front and rear 12bolt w/ eaton tru-trac 4:11 gears 1BADD65 my build thread: http://67-72chevytrucks.com/vboard/s...=1#post2601700

08-09-2008, 05:16 PM	#80
Chuck78 Registered User Join Date: Apr 2005 Location: Columbus, OH Posts: 197	Re: 4-5-6 Chevy Truck parts got any gauge clusters? I mainly need the part with the printed circuit. This is for a 62, as the 60-63 printed circuits have a lot of problems by design. I was told the 64-66 units were interchangeable, so I assume that means just the rear piece. Might need a fuel gauge also, have to troubleshoot that some more though. Thanks! Chuck

08-10-2008, 07:45 AM	#81
Chuck78 Registered User Join Date: Apr 2005 Location: Columbus, OH Posts: 197	Re: 4-5-6 Chevy Truck parts I should add, a 62 GMC. Not sure on what units are interchangeable, but someone on the 60-66 GMC list informed me that the 60-62 printed circuit units had problems with the circuits, and the 64-66 were interchangeable. I saw a 62 Chevy cluster and it looked totally different from mine, and was wired, not printed circuit. Maybe it's just a GMC cluster that I am needing? Thanks, Chuck

08-10-2008, 08:21 AM	#82
65chevy4x4 Registered User Join Date: Oct 2007 Location: ST. Joseph MO. Posts: 38	Re: 4-5-6 Chevy Truck parts Tony I'am needing a rear yoke of a 4-speed trans with the floor hand brake'This is the yoke that bolts to the drum. Thanks

08-11-2008, 01:48 AM	#83
83burban Registered User Join Date: Feb 2008 Location: la Posts: 345	Re: 4-5-6 Chevy Truck parts Tony, we spoke about a week ago about a bracket for the radiator and I asked if you had a piece of the E-Brake linkage. I haven't heard back from you, if you need me to send another copy of the email I can do that. I have the money ready and can send it as soon as I head back. Also, any posi-traction units (just the posi, not a complete axle)? You can email me kabrimberry@socal.rr.com if you would like - Kurt

08-13-2008, 07:20 AM	#89
Tim64 Registered User Join Date: Aug 2007 Location: Vandalia, Ohio Posts: 396	Re: 4-5-6 Chevy Truck parts Hey Tony, Those mirrors look nice. How much shipped to 45377? Thanks, Tim

11-27-2008, 12:23 AM	#91
slickfaster Registered User Join Date: Nov 2008 Location: redondo bch. Posts: 13	Re: 4-5-6 Chevy Truck parts do you have trans linkage for saginaw 3sd, swaped mine out and its longer than the OG unit, my old linkage wont work, too short and it didnt come with trani shifter arms. Thank you

11-27-2008, 09:24 AM	#92
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: 4-5-6 Chevy Truck parts slickfaster: I have what you need. How about $50.00, including shipping?

12-11-2008, 06:43 AM	#93
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: 4-5-6 Chevy Truck parts slickfaster in Redondo Beach: Did you find what you needed? If not, let me know if I can help you with the three-speed shifter linkage or other 4-5-6 Chevy trucks parts in the future. Happy Holidays!

12-18-2008, 09:43 PM	#94
bwkennedy Registered User Join Date: Dec 2008 Location: Cookeville, TN Posts: 37	Re: 4-5-6 Chevy Truck parts How bout a Driver door and a Passenger fender off a 66' C-10 to Tennessee 38501. Thanks, Bryan

12-26-2008, 02:05 PM	#95
fd1965 Registered User Join Date: Dec 2008 Location: Salisbury, MD Posts: 2	Re: 4-5-6 Chevy Truck parts I am looking for a hood for a 65 c-10

12-26-2008, 06:25 PM	#97
quickchevy Registered User Join Date: Apr 2008 Location: Augusta,Ga Posts: 119	Re: 4-5-6 Chevy Truck parts Also looking for repair parts for my bed.Rear bed corner section.If you go to paint and body.Then the post Help with bed repair you can see the pics.Thanks

12-26-2008, 08:54 PM	#99
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: 4-5-6 Chevy Truck parts I need a solid complete running truck shipped to NY for less than $1000. __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.