Project Slammed 67 longbed - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nastyc10 · 10-12-2009, 01:44 AM

Those are some good lookin wheels! Keep up the good work!

turbohacker · 10-12-2009, 06:52 PM

The Filler is made by Evercoat and its their Z-Grip Lightweight filler. It sands WAY the hell better then Bondo.

I also use their SpotLite glazing putty for the little stuff because it wont shrink like other brands in the tube.

turbohacker · 11-17-2009, 08:59 PM

I did a little more work this week.
I undercoated the hood to stiffen it up for blocking.

i also shaved the little mounting pads for the bowtie on the front.

Twitchin R&C · 11-19-2009, 02:07 AM

Hey. Your truck is coming along nicely. Keep up the great work. I'm also a senior this year and i also have a longbed but its a 69. I think I saw your dad's A&W truck broke down at Mooney and Tulare Avenue earlier this year? Around June or July? Maybe you could give us a report on that? All i remember is it was missing a wheel and it looked like they were trying to figure out how to get that low a$$ thing up on the flatbed. Haha. Anyways its looking good and keep at it!!

turbohacker · 11-20-2009, 02:38 AM

Haha! what a small world! You are correct, apparently close to 9000 lbs on a 5 lug axle with 5/16 studs is to much! Unfortunately my dad and i were out of town when it happened or we would have just run over and put a couple new studs in it and limped it home. also unfourtonatly ,the towing company thought it would be wise to stare at it for 10 hours while scratching their heads

they then proceeded to load it on a couple car dollies with old cracked tires. they made it a mile or so away and the dollies gave out. The cherry on top is that they are threatening to charge us for the damage to the towing equipment in saying that we did not inform them of the large weight of the vehicle.

The funny thing is, our new '09 dodge cummins 4x4 weighs over 8500 lbs and they seem to tow them just fine... hmmm Needless to say we were not very impressed with this towing company

END RANT

OKGMC4 · 07-22-2010, 08:55 AM

Just ran across this thread...this truck looks like it will be awesome! Any updates? It's been awhile so I hope it's still in the works?

Slick67 · 07-22-2010, 09:42 AM

Welcome to the 67LB club! Your truck is lookin great and I really like the rims, great choice. Keep up the great work!!

FRENCHBLUE72 · 10-15-2010, 01:38 PM

This build has really come along ways...

cable666guy · 10-17-2010, 04:26 PM

any updates???

turbohacker · 01-27-2011, 12:40 PM

Wow, it has been a while since i did anything! I have gotten a little bit done in all this time though...

I decided that i didnt like how the motor looked, so i gave it the same treatment as the rest of the truck! I used a die grinder with carbide bits and about 200 sanding rolls and smoothed and matched all surfaces while removing unessesary tabs and such.

I then primered it and hand sanded that a couple times..

Finally i ended up with this!

I might have painte something else as well...

More pics after work and school!

VA72C10 · 01-27-2011, 02:21 PM

Looking great! I thought I was one of the only other ones to have the smooth sickness

I did that to my small block too.

67chevy1series · 01-27-2011, 06:53 PM

wow now you just need to reassemble it! your comin along nicely!

*project 67 sub* · 01-27-2011, 07:27 PM

man i was just thinking about this build last night and was wondering how it was going lol, know i know haha

thor · 06-02-2011, 03:15 PM

is it time for a quarterly check-in? how's it coming along? well i hope!

70c10stepside · 06-03-2011, 03:16 AM

Just looked at the whole build thread, I like it a lot! nice work

heeroyue2002 · 06-03-2011, 04:23 AM

looken good

R&K's71 · 06-03-2011, 11:14 AM

Love the color. What color blue is that

thirdstreettito · 06-13-2011, 12:11 PM

BUMP! Love this build!

orngsikL · 03-18-2012, 12:31 PM

i like that blue!

FRENCHBLUE72 · 03-19-2012, 12:39 PM

Beautiful...

**67cheby** · 03-19-2012, 12:59 PM

WOW !! looks amazing !

10-12-2009, 01:44 AM	#76
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Project Slammed 67 longbed Those are some good lookin wheels! Keep up the good work!

10-12-2009, 06:52 PM	#77
turbohacker PISS POOR Join Date: Dec 2007 Location: visalia, ca Posts: 98	Re: Project Slammed 67 longbed The Filler is made by Evercoat and its their Z-Grip Lightweight filler. It sands WAY the hell better then Bondo. I also use their SpotLite glazing putty for the little stuff because it wont shrink like other brands in the tube. __________________ Slammed 67 long bed with vette suspention build thread http://67-72chevytrucks.com/vboard/s...d.php?t=291149 Last edited by turbohacker; 10-12-2009 at 06:53 PM.

11-17-2009, 08:59 PM	#78
turbohacker PISS POOR Join Date: Dec 2007 Location: visalia, ca Posts: 98	Re: Project Slammed 67 longbed I did a little more work this week. I undercoated the hood to stiffen it up for blocking. i also shaved the little mounting pads for the bowtie on the front. __________________ Slammed 67 long bed with vette suspention build thread http://67-72chevytrucks.com/vboard/s...d.php?t=291149

11-19-2009, 02:07 AM	#79
Twitchin R&C Registered User Join Date: Oct 2009 Location: Tulare, California Posts: 38	Re: Project Slammed 67 longbed Hey. Your truck is coming along nicely. Keep up the great work. I'm also a senior this year and i also have a longbed but its a 69. I think I saw your dad's A&W truck broke down at Mooney and Tulare Avenue earlier this year? Around June or July? Maybe you could give us a report on that? All i remember is it was missing a wheel and it looked like they were trying to figure out how to get that low a$$ thing up on the flatbed. Haha. Anyways its looking good and keep at it!! Last edited by Twitchin R&C; 11-19-2009 at 02:09 AM.

11-20-2009, 02:38 AM	#80
turbohacker PISS POOR Join Date: Dec 2007 Location: visalia, ca Posts: 98	Re: Project Slammed 67 longbed Haha! what a small world! You are correct, apparently close to 9000 lbs on a 5 lug axle with 5/16 studs is to much! Unfortunately my dad and i were out of town when it happened or we would have just run over and put a couple new studs in it and limped it home. also unfourtonatly ,the towing company thought it would be wise to stare at it for 10 hours while scratching their heads they then proceeded to load it on a couple car dollies with old cracked tires. they made it a mile or so away and the dollies gave out. The cherry on top is that they are threatening to charge us for the damage to the towing equipment in saying that we did not inform them of the large weight of the vehicle. The funny thing is, our new '09 dodge cummins 4x4 weighs over 8500 lbs and they seem to tow them just fine... hmmm Needless to say we were not very impressed with this towing company END RANT __________________ Slammed 67 long bed with vette suspention build thread http://67-72chevytrucks.com/vboard/s...d.php?t=291149 Last edited by turbohacker; 11-20-2009 at 02:39 AM.

07-22-2010, 08:55 AM	#81
OKGMC4 Registered User Join Date: Oct 2009 Location: Broken Arrow, OK Posts: 1,245	Re: Project Slammed 67 longbed Just ran across this thread...this truck looks like it will be awesome! Any updates? It's been awhile so I hope it's still in the works? __________________ 56 GMC BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=368649 69 long bed Chevy turned 67 gmc jimmy roadster: https://67-72chevytrucks.com/vboard/...d.php?t=851167

07-22-2010, 09:42 AM	#82
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project Slammed 67 longbed Welcome to the 67LB club! Your truck is lookin great and I really like the rims, great choice. Keep up the great work!! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

10-15-2010, 01:38 PM	#83
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project Slammed 67 longbed This build has really come along ways... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

10-17-2010, 04:26 PM	#84
cable666guy Registered User Join Date: Sep 2008 Location: Willow Grove, PA Posts: 299	Re: Project Slammed 67 longbed any updates???

01-27-2011, 12:40 PM	#85
turbohacker PISS POOR Join Date: Dec 2007 Location: visalia, ca Posts: 98	Re: Project Slammed 67 longbed Wow, it has been a while since i did anything! I have gotten a little bit done in all this time though... I decided that i didnt like how the motor looked, so i gave it the same treatment as the rest of the truck! I used a die grinder with carbide bits and about 200 sanding rolls and smoothed and matched all surfaces while removing unessesary tabs and such. I then primered it and hand sanded that a couple times.. Finally i ended up with this! I might have painte something else as well... More pics after work and school! __________________ Slammed 67 long bed with vette suspention build thread http://67-72chevytrucks.com/vboard/s...d.php?t=291149

01-27-2011, 02:21 PM	#86
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project Slammed 67 longbed Looking great! I thought I was one of the only other ones to have the smooth sickness I did that to my small block too. __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-27-2011, 06:53 PM	#87
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project Slammed 67 longbed wow now you just need to reassemble it! your comin along nicely!

01-27-2011, 07:27 PM	#88
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: Project Slammed 67 longbed man i was just thinking about this build last night and was wondering how it was going lol, know i know haha

06-02-2011, 03:15 PM	#89
thor Registered User Join Date: Apr 2008 Location: Redmond, WA Posts: 679	Re: Project Slammed 67 longbed is it time for a quarterly check-in? how's it coming along? well i hope! __________________ 1972 Chevy Blazer CST.....Project: Polished Turd

06-03-2011, 03:16 AM	#90
70c10stepside Registered User Join Date: Jun 2011 Location: Taylorsville, Georgia Posts: 482	Re: Project Slammed 67 longbed Just looked at the whole build thread, I like it a lot! nice work



Register or Log In To remove these advertisements.

06-03-2011, 04:23 AM	#91
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: Project Slammed 67 longbed looken good __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

06-03-2011, 11:14 AM	#92
R&K's71 Registered User Join Date: May 2011 Location: Silex Mo Posts: 180	Re: Project Slammed 67 longbed Love the color. What color blue is that

06-13-2011, 12:11 PM	#93
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Project Slammed 67 longbed BUMP! Love this build! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

03-18-2012, 12:31 PM	#94
orngsikL Registered User Join Date: Oct 2011 Location: Watson, Louisiana Posts: 312	Re: Project Slammed 67 longbed i like that blue! __________________ build thread - 1972 C/10 "Ethyl" 1974 C/10 " Paw Paw" C/10 Club Louisiana instagram - @esso_c10 @projectpawpaw

03-19-2012, 12:39 PM	#95
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project Slammed 67 longbed Beautiful... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-19-2012, 12:59 PM	#96
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project Slammed 67 longbed WOW !! looks amazing ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Register or Log In To remove these advertisements.