Project Blaz-Air - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 09-03-2009, 09:03 AM

Looks like loads of fun

**Hart_Rod** · 09-03-2009, 10:52 AM

Quote:

Originally Posted by 1sik52

After removing the rockers that the PO threw on I found some redneck body work that the PO did. Seems that they had patched over rust that was in the floor pan and then just put some new rockers on top of the patches. So I have spent some time removing and replacing.

Ouch!! At least you found it now and can repair it correctly. It would have really sucked to have painted it and then found it later. I know everyone doesn't have the skill or tools to do restorations the correct way, but sometimes you gotta wonder what people are thinking.....

. See you on Monday.

R/

my67chevytruck · 09-03-2009, 12:11 PM

looking good....

*1sik52* · 09-03-2009, 10:43 PM

Knocked a good amount out today. I got the new cab brace and outer patch panel in and have been fitting the floor pan. Should have the passenger side finished up by this weekend.

mcbassin · 09-03-2009, 11:22 PM

Really neat build! I missed that one on Ebay. I bet you had to pay some greenbacks for that rig and delivery! I like sheet metal work you have going there. I know what you are talking about po doing some strange things. I had one once where the po had taken galvenized sheetmetal duct and riveted over rusty holes to make a "new" floorboard.

*1sik52* · 09-03-2009, 11:30 PM

Quote:

Originally Posted by mcbassin

Really neat build! I missed that one on Ebay. I bet you had to pay some greenbacks for that rig and delivery! I like sheet metal work you have going there. I know what you are talking about po doing some strange things. I had one once where the po had taken galvenized sheetmetal duct and riveted over rusty holes to make a "new" floorboard.

Actually I got a pretty good deal. $5,500 plus 800 delivered.

mcbassin · 09-04-2009, 07:52 AM

Quote:

Originally Posted by 1sik52

Actually I got a pretty good deal. $5,500 plus 800 delivered.

Your not kidding about getting a good deal! These blazers (2wd) aren't that easy to find. Yours someone had already did quite a few mods to it. Keep the pictures coming.

*1sik52* · 09-04-2009, 01:08 PM

More welding!

74 droptopblazer · 09-04-2009, 11:44 PM

on the dropmember, did u buy 4 a 4x4 frame or 2wd,I see yours once was a 4x4 by the frame . I would like 2 now before I order one 4 myself (by the way that thing looks killer )

*1sik52* · 09-04-2009, 11:51 PM

Quote:

Originally Posted by 74 droptopblazer

on the dropmember, did u buy 4 a 4x4 frame or 2wd,I see yours once was a 4x4 by the frame . I would like 2 now before I order one 4 myself (by the way that thing looks killer )

Thanks. They are the same for a 2wd or 4wd. Just remove your stock crossmember and bolt up the dropmember

56fleetside · 09-16-2009, 09:09 PM

Looking badass brother and coming along very nicely......

*1sik52* · 09-30-2009, 06:38 PM

Finished up the passenger side lower A-pillar. Just need to do a little grinding on the welds and then install the rockers.

I also picked up this old coke machine from an old man couple weeks ago for couple hundred bucks. Everything works on it and now I got something to keep my beer CoLd!

**Hart_Rod** · 09-30-2009, 06:46 PM

The repair work looks great. I'll take care of those wheels for you until you get your blazer done.............

.

*1sik52* · 09-30-2009, 07:15 PM

Quote:

Originally Posted by Hart_Rod

The repair work looks great. I'll take care of those wheels for you until you get your blazer done.............

.

Hahaha! $6,000 and you can babysit them all you want

VA72C10 · 09-30-2009, 09:22 PM

Repairs look good.....

very cool coke machine....

...and those rims are going to be simply AWESOME on your blazer.

*1sik52* · 09-30-2009, 09:41 PM

Quote:

Originally Posted by VA72C10

Repairs look good.....

very cool coke machine....

...and those rims are going to be simply AWESOME on your blazer.

Thanks!

my67chevytruck · 10-01-2009, 10:39 AM

looking good!!!!

very nice rims as well!!

trenz68 · 10-07-2009, 01:17 PM

cant wait so see what u have in store for this blazer

*1sik52* · 10-27-2009, 10:33 PM

Finally have been able to get back on the Blazer a little today. I was able to replace the torsion box on the passenger side and start stitching up the bedside.

my67chevytruck · 10-27-2009, 10:51 PM

looking good....

VA72C10 · 10-27-2009, 11:34 PM

nice work....glad to see some progress...this is going to be such an awesome machine!!!

*1sik52* · 10-28-2009, 07:33 PM

Got the Passenger side floorpan all finished up along with the torsion box. Finished welding up the bedside and also shaved the side marker light on the passenger side as well. Its getting there!!!!

VA72C10 · 10-28-2009, 07:38 PM

Looking good!!!

**kev2809** · 10-28-2009, 09:09 PM

coming along pretty good...nice work

*1sik52* · 10-28-2009, 11:06 PM

Quote:

Originally Posted by kev2809

coming along pretty good...nice work

Thanks!

09-03-2009, 09:03 AM	#76
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project Blaz-Air Looks like loads of fun __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-03-2009, 12:11 PM	#78
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project Blaz-Air looking good.... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

09-03-2009, 10:43 PM	#79
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air Knocked a good amount out today. I got the new cab brace and outer patch panel in and have been fitting the floor pan. Should have the passenger side finished up by this weekend.

09-03-2009, 11:22 PM	#80
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project Blaz-Air Really neat build! I missed that one on Ebay. I bet you had to pay some greenbacks for that rig and delivery! I like sheet metal work you have going there. I know what you are talking about po doing some strange things. I had one once where the po had taken galvenized sheetmetal duct and riveted over rusty holes to make a "new" floorboard. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

09-04-2009, 01:08 PM	#83
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air More welding!

09-04-2009, 11:44 PM	#84
74 droptopblazer Registered User Join Date: Nov 2008 Location: pocola ok Posts: 14	Re: Project Blaz-Air on the dropmember, did u buy 4 a 4x4 frame or 2wd,I see yours once was a 4x4 by the frame . I would like 2 now before I order one 4 myself (by the way that thing looks killer )

09-16-2009, 09:09 PM	#86
56fleetside ///RELAXED ATMOSPHERE Join Date: Oct 2008 Location: Durant MS Posts: 149	Re: Project Blaz-Air Looking badass brother and coming along very nicely...... __________________ Like a BOSS

09-30-2009, 06:38 PM	#87
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air Finished up the passenger side lower A-pillar. Just need to do a little grinding on the welds and then install the rockers. I also picked up this old coke machine from an old man couple weeks ago for couple hundred bucks. Everything works on it and now I got something to keep my beer CoLd!

09-30-2009, 06:46 PM	#88
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Project Blaz-Air The repair work looks great. I'll take care of those wheels for you until you get your blazer done.............. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

09-30-2009, 09:22 PM	#90
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project Blaz-Air Repairs look good..... very cool coke machine.... ...and those rims are going to be simply AWESOME on your blazer. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-01-2009, 10:39 AM	#92
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project Blaz-Air looking good!!!! very nice rims as well!! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

10-07-2009, 01:17 PM	#93
trenz68 Damage Inc Join Date: Dec 2008 Location: Baytown Tx Posts: 336	Re: Project Blaz-Air cant wait so see what u have in store for this blazer __________________ 05 CC- magnacharged,LTs,Gt-2 cam,3.73s,tru-trac,tuned-sold 01 ECSB- caddy-clipped,22/24 intros,cammed,layin-frame 04 RCSB-joe gibbs clone,22in billets 68 stepper build http://67-72chevytrucks.com/vboard/s...d.php?t=332337

10-27-2009, 10:33 PM	#94
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air Finally have been able to get back on the Blazer a little today. I was able to replace the torsion box on the passenger side and start stitching up the bedside.

10-27-2009, 10:51 PM	#95
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project Blaz-Air looking good.... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

10-27-2009, 11:34 PM	#96
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project Blaz-Air nice work....glad to see some progress...this is going to be such an awesome machine!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

10-28-2009, 07:33 PM	#97
1sik52 Account Suspended Join Date: Oct 2008 Location: Gulfport, Ms Posts: 833	Re: Project Blaz-Air Got the Passenger side floorpan all finished up along with the torsion box. Finished welding up the bedside and also shaved the side marker light on the passenger side as well. Its getting there!!!!

10-28-2009, 07:38 PM	#98
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project Blaz-Air Looking good!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-28-2009, 09:09 PM	#99
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,174	Re: Project Blaz-Air coming along pretty good...nice work __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

Register or Log In To remove these advertisements.