I'm legit now, and I want your powdercoating business - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tx Firefighter · 02-23-2009, 09:39 AM

Quote:

Originally Posted by my67chevytruck

Kevin,

Do you suggest me going over my ramhorns with a flapdisk prior to sending them to you for PC then ?

Absolutely. The slicker you get them, the slicker the final result will be. I have seen some (OCD) guys make them completely smooth prior to coating. Wear a respirator though, those cast iron boogers will give you quite a sinus infection.

clos69 · 02-23-2009, 09:47 AM

Kevin- can you give a price to coat some shorty hedman hedders in high temp silver. I can drop this off later on today if you are avaliable.thanks Carlos

Tx Firefighter · 02-23-2009, 11:47 AM

Carlos, give me an idea of the size of your headers. How long are they in their longest dimension.

Also, what is their condition right now ? Rusty used, new, etc...

clos69 · 02-23-2009, 01:17 PM

Kevin the headers are new and uncoated and I think they measure between 18-20in.....I could not find a website that showed the excact dimensions...but the part # is 69640 hedman hedders,thanks

Tx Firefighter · 02-23-2009, 03:09 PM

PM sent

sdailey · 02-24-2009, 03:09 PM

Kevin,

What would you charge to blast and powdercoat (semi gloss black) two differential covers? They would be free of oil and grime.

Thanks.

truckintexas · 02-26-2009, 11:25 AM

I didn't see them spoken for in the thread, so I will take the 70 headlight bezels. Here is my list so far:

70 headlight bezels - black
washer bracket - black
hood latch pin - chrome

The washer bracket and latch pin from the other post and the headlight bezels from this post. I will bring cash on Saturday.

Michael

Tx Firefighter · 02-26-2009, 01:16 PM

Michael, I've got you down for the washer bottle and bracket, but I'm completely out of headlight bezels right now. I'm trying to get more though.

truckintexas · 02-26-2009, 10:08 PM

That's fine. I'll wait. Dont forget to PM me your phone number for Saturday meet-up. Thanks.

matt67350 · 02-27-2009, 07:06 PM

5 lug rallys, just got them back look great.

truckintexas · 02-28-2009, 03:35 PM

Thanks for the Washer Bracket and Hood Latch Pin. Excellent stuff. Also, on the rest of the items do chrome on the throttle bracket, shifter housing, and small zinc plated booster parts (wired together). Everything else, black semigloss. Thanks again. Talk to you next week.

And yes, I do want the 70 headlight bezels, black semi gloss as well.

Later,
Michael

Tx Firefighter · 02-28-2009, 09:30 PM

Here is a hood latch that I did for member 71 Super. Sixty percent gloss black. It looks slicker in person than the pictures reflect. I'm shipping it out Monday morning.

and, Michael, I got a majority of the prep work done on your parts today. It looks like the pot metal shifter housing is going to work out just fine. It blasted nice and smooth. I will get the parts coated Monday when I get home from work. I will let you know when they're done. Should be Tuesday at the latest.

Regards,
Kevin

71 super · 03-02-2009, 11:45 AM

Looks good! I will let you know when it arrives. thanks Harold

tjvending · 03-04-2009, 04:09 PM

Kelvin,

Do you sometimes use a toaster oven? Would a toaster oven work for small parts? Just wanting some advise from a pro. Also when do you have to used a primer coat? TJ

ll____b0t____ll · 03-12-2009, 08:08 PM

Kevin.

I got question for ya, Im needing set of seat mounts for a pair of poly buckets I have and I dont like the thin gauge metel the jegs mounts are made of and wanted to use a thicker angle iron.
Also I wanted to get these powder coated from ya high gloss black.

My question is , in addition to Powdercoating would you be interested in fabing these for me as they are very simple peices and I could pay you for not only the Powdercoating but also parts and time making them and shipping?

If thats somthing you dont want to do thats cool and I'll have other stuff to send you later but I thought I might aswell ask.

P.S I really like the quality of your work .

Tx Firefighter · 03-12-2009, 08:41 PM

Id be happy to make the brackets, but I am a bit backed up right now. In addition to the powdercoating, I'm building a pretty indepth part for another member right now. It might be a couple of weeks before I could get to it.

ll____b0t____ll · 03-12-2009, 08:58 PM

Quote:

Originally Posted by Tx Firefighter

Id be happy to make the brackets, but I am a bit backed up right now. In addition to the powdercoating, I'm building a pretty indepth part for another member right now. It might be a couple of weeks before I could get to it.

That would be ok Kevin I need to get the demensions and have many purchases to buy on this 15th and next first and wouldnt be able to pay ya until next 15th so .
Just hit me up in PM sometime when you are less busy, again no hurry here I wont even be looking to mount them until Around June , I just was wondering if you would be interested so .. Thats Cool

gojo00 · 03-14-2009, 10:48 AM

Great work Kevin and I will definitely use you in the future. How much to pc (silver) a set of truck rallyes?

Tx Firefighter · 03-14-2009, 01:36 PM

Quote:

Originally Posted by gojo00

Great work Kevin and I will definitely use you in the future. How much to pc (silver) a set of truck rallyes?

Figure 40 bucks a wheel for silver and clear coat.

stllookn · 03-14-2009, 01:38 PM

Wish you were closer...and so does my wife so she can get her oven back..LOL!

Codys87 · 03-27-2009, 05:19 PM

Hey I'm interested in seeing if you can smooth up and powder coat some aluminum accessory brackets for a 6.0L. IF you could pm me about the details... thanks.

Tx Firefighter · 03-27-2009, 05:49 PM

Quote:

Originally Posted by Codys87

Hey I'm interested in seeing if you can smooth up and powder coat some aluminum accessory brackets for a 6.0L. IF you could pm me about the details... thanks.

You bet ! Just get me a picture of the parts and what color you want and we can talk price.

02-23-2009, 09:47 AM	#77
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: I'm legit now, and I want your powdercoating business Kevin- can you give a price to coat some shorty hedman hedders in high temp silver. I can drop this off later on today if you are avaliable.thanks Carlos __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

02-23-2009, 11:47 AM	#78
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: I'm legit now, and I want your powdercoating business Carlos, give me an idea of the size of your headers. How long are they in their longest dimension. Also, what is their condition right now ? Rusty used, new, etc... __________________ I'm on the Instagram- @Gearhead_Kevin

02-23-2009, 01:17 PM	#79
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: I'm legit now, and I want your powdercoating business Kevin the headers are new and uncoated and I think they measure between 18-20in.....I could not find a website that showed the excact dimensions...but the part # is 69640 hedman hedders,thanks __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

02-23-2009, 03:09 PM	#80
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: I'm legit now, and I want your powdercoating business PM sent __________________ I'm on the Instagram- @Gearhead_Kevin

02-24-2009, 03:09 PM	#81
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: I'm legit now, and I want your powdercoating business Kevin, What would you charge to blast and powdercoat (semi gloss black) two differential covers? They would be free of oil and grime. Thanks. __________________ Shannon

02-26-2009, 11:25 AM	#82
truckintexas Registered User Join Date: Jul 2004 Location: Weatherford, TX Posts: 225	Re: I'm legit now, and I want your powdercoating business I didn't see them spoken for in the thread, so I will take the 70 headlight bezels. Here is my list so far: 70 headlight bezels - black washer bracket - black hood latch pin - chrome The washer bracket and latch pin from the other post and the headlight bezels from this post. I will bring cash on Saturday. Michael Last edited by truckintexas; 02-26-2009 at 11:28 AM.

02-26-2009, 01:16 PM	#83
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: I'm legit now, and I want your powdercoating business Michael, I've got you down for the washer bottle and bracket, but I'm completely out of headlight bezels right now. I'm trying to get more though. __________________ I'm on the Instagram- @Gearhead_Kevin

02-26-2009, 10:08 PM	#84
truckintexas Registered User Join Date: Jul 2004 Location: Weatherford, TX Posts: 225	Re: I'm legit now, and I want your powdercoating business That's fine. I'll wait. Dont forget to PM me your phone number for Saturday meet-up. Thanks.

02-27-2009, 07:06 PM	#85
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	Re: I'm legit now, and I want your powdercoating business 5 lug rallys, just got them back look great. Attached Images __________________ 69 swb stepside, rebuild and upgrade in progress

02-28-2009, 03:35 PM	#86
truckintexas Registered User Join Date: Jul 2004 Location: Weatherford, TX Posts: 225	Re: I'm legit now, and I want your powdercoating business Thanks for the Washer Bracket and Hood Latch Pin. Excellent stuff. Also, on the rest of the items do chrome on the throttle bracket, shifter housing, and small zinc plated booster parts (wired together). Everything else, black semigloss. Thanks again. Talk to you next week. And yes, I do want the 70 headlight bezels, black semi gloss as well. Later, Michael Last edited by truckintexas; 02-28-2009 at 03:36 PM.

02-28-2009, 09:30 PM	#87
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: I'm legit now, and I want your powdercoating business Here is a hood latch that I did for member 71 Super. Sixty percent gloss black. It looks slicker in person than the pictures reflect. I'm shipping it out Monday morning. and, Michael, I got a majority of the prep work done on your parts today. It looks like the pot metal shifter housing is going to work out just fine. It blasted nice and smooth. I will get the parts coated Monday when I get home from work. I will let you know when they're done. Should be Tuesday at the latest. Regards, Kevin __________________ I'm on the Instagram- @Gearhead_Kevin

03-02-2009, 11:45 AM	#88
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: I'm legit now, and I want your powdercoating business Looks good! I will let you know when it arrives. thanks Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

03-04-2009, 04:09 PM	#89
tjvending Registered User Join Date: Oct 2007 Location: rockville, md Posts: 257	Re: I'm legit now, and I want your powdercoating business Kelvin, Do you sometimes use a toaster oven? Would a toaster oven work for small parts? Just wanting some advise from a pro. Also when do you have to used a primer coat? TJ

03-12-2009, 08:08 PM	#90
ll____b0t____ll Registered User Join Date: Dec 2008 Location: Cody Wyoming Posts: 238	Re: I'm legit now, and I want your powdercoating business Kevin. I got question for ya, Im needing set of seat mounts for a pair of poly buckets I have and I dont like the thin gauge metel the jegs mounts are made of and wanted to use a thicker angle iron. Also I wanted to get these powder coated from ya high gloss black. My question is , in addition to Powdercoating would you be interested in fabing these for me as they are very simple peices and I could pay you for not only the Powdercoating but also parts and time making them and shipping? If thats somthing you dont want to do thats cool and I'll have other stuff to send you later but I thought I might aswell ask. P.S I really like the quality of your work .

03-12-2009, 08:41 PM	#91
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: I'm legit now, and I want your powdercoating business Id be happy to make the brackets, but I am a bit backed up right now. In addition to the powdercoating, I'm building a pretty indepth part for another member right now. It might be a couple of weeks before I could get to it. __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

03-14-2009, 10:48 AM	#93
gojo00 Registered User Join Date: Aug 2006 Location: Dallas Posts: 61	Re: I'm legit now, and I want your powdercoating business Great work Kevin and I will definitely use you in the future. How much to pc (silver) a set of truck rallyes? __________________ 04 Chevy X Cab 67 Chevy SWB (LuLu) 15 GMC Sierra Crew

03-14-2009, 01:38 PM	#95
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: I'm legit now, and I want your powdercoating business Wish you were closer...and so does my wife so she can get her oven back..LOL! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

03-27-2009, 05:19 PM	#96
Codys87 Registered User Join Date: Jan 2008 Location: Rockwall, TX Posts: 48	Re: I'm legit now, and I want your powdercoating business Hey I'm interested in seeing if you can smooth up and powder coat some aluminum accessory brackets for a 6.0L. IF you could pm me about the details... thanks.

Register or Log In To remove these advertisements.