WY Parting 1972 K20 suburban - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ABHaulR · 11-24-2009, 11:11 AM

Sharpie, I see what you mean about the doors and the body work. Thanks for you time and the pics. Dwayne

rsavage · 11-24-2009, 11:12 AM

Okay, There is a Greyhound station in Batavia NY 14020 at the 48 Deli Express, 8204 Park Rd. Batavia NY. I called there and they accept Greyhound packages. Please pm me with payment info with shipping charges. I assume you can do paypal? Thanks, Rick

*sharpie1972* · 11-24-2009, 11:17 AM

Hi Rick, let's call it $65 for shipping, I'll cover anything over. $215 total. Paypal: denscustom1@hotmail.com Thanks, Dennis

rsavage · 11-24-2009, 11:30 AM

Sharpie,
There is a Greyhound station that accepts packages in Batavia NY 14020 at the 48Deli Express, 8204 Park Rd. Batavia 14020. PM me with shipping cost to that location and payment info - I assume that you do paypal. Thanks, Rick

*sharpie1972* · 11-24-2009, 11:41 AM

PM sent. Sharpie

rsavage · 11-24-2009, 11:51 AM

Dennis,
Sorry for the double post. Money sent via paypal. Let me know when shipped. Includes the side and end trim pieces for the headliner right?

**kev2809** · 11-30-2009, 06:05 PM

sorry for the delay, but heres the piece i need. body line down...its the passenger lower section right behind the door.

[IMG]

[/IMG]

*sharpie1972* · 11-30-2009, 08:41 PM

Mines not much better in that area, I do have a truck bed I'm parting that is mint in that section. Wheel arch is the same, would just have to tie it in at the door line. I can get pics of that if you are interested. Thanks, Sharpie

**kev2809** · 11-30-2009, 08:54 PM

my door line is good, just the corner and into the bottom of the wheel arch. truck section would be just fine as long as it works. also, can check the driver side wheel arch? i replaced my driver side quarter panel and for some reason it did not come with the wheel arch indentions. would probably need no more than half the arch line, back half side. if you dont mind, can you post some pics of both? i would prefer the driver side wheel arch to be from the suburban so i know its an exact match...unless you have one from a bed. thanks!

swyfor5 · 11-30-2009, 10:45 PM

Just bumping in and got to say Sharpie is a good guy to deal with. Been very happy with my past transactions! Thank's Sharpie! Very upfront and prompt!

*sharpie1972* · 11-30-2009, 11:52 PM

Thanks SWYFOR5, glad to have happy customers! Working until dark tomorrow, but should be able to get you some pics Wednesday. Thanks, Sharpie

**kev2809** · 12-01-2009, 12:23 AM

thats fine, just pm me when you can post em up. thanks

*sharpie1972* · 12-02-2009, 08:19 PM

Wheel arch pics for KEV2809.Passenger side of truck arch looks good. Drivers side of sub has rust and the truck is dented pretty bad on that side. I have another truck bed I can check the drivers side on. Thanks, Sharpie

**kev2809** · 12-02-2009, 10:07 PM

the first pic would be the driver side rear wheel arch right? i would probably need right about where the dent is above the blue paint...all the way to the bottom of the wheel arch. all about an inch and a half wide so i can cut to fit. heres about what i need...

the main part i need is the blue line which is the body lines on the wheel arch, but i would like it cut up to the red line if possible so i can cut it to fit.

on the other side, i think i might need that part off of a burban. the truck area seems to round there.

*sharpie1972* · 12-03-2009, 09:49 AM

I should have labeled my pictures for you. The one you drew on is the passenger side, front of the wheel arch. Thanks, Sharpie

HuggerCST · 12-03-2009, 10:50 AM

I'm interested in the E-brake cables, cable holders, and trans hump if available.

**kev2809** · 12-03-2009, 06:14 PM

oops, lol, I thought it was the other side. do you have a good side like that? you don't have to drill out the spot welds, I can do that.

rsavage · 12-05-2009, 06:49 PM

Dennis,
Does the burb have a factory type (not home made) trailer hitch on it?
Rick

*sharpie1972* · 12-05-2009, 07:53 PM

I will check it over and get some pics. I believe it is the factory type. Sharpie

*sharpie1972* · 12-07-2009, 09:23 AM

Hi Rick, the hitch looks homemade. Your headliner package is going out UPS today. Thanks, Dennis

11-24-2009, 11:11 AM	#76
ABHaulR Registered User Join Date: Jun 2003 Location: West Valley City, Ut Posts: 311	Re: Parting 1972 K20 suburban Sharpie, I see what you mean about the doors and the body work. Thanks for you time and the pics. Dwayne __________________ 72' GMC Suburban 10 1/2" of Lift, 40" Tires! Waiting for restoration 67' Chevy, What to do??? And Bad Ass American Bulldogs!

11-24-2009, 11:12 AM	#77
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Parting 1972 K20 suburban Okay, There is a Greyhound station in Batavia NY 14020 at the 48 Deli Express, 8204 Park Rd. Batavia NY. I called there and they accept Greyhound packages. Please pm me with payment info with shipping charges. I assume you can do paypal? Thanks, Rick

11-24-2009, 11:17 AM	#78
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban Hi Rick, let's call it $65 for shipping, I'll cover anything over. $215 total. Paypal: denscustom1@hotmail.com Thanks, Dennis

11-24-2009, 11:30 AM	#79
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Parting 1972 K20 suburban Sharpie, There is a Greyhound station that accepts packages in Batavia NY 14020 at the 48Deli Express, 8204 Park Rd. Batavia 14020. PM me with shipping cost to that location and payment info - I assume that you do paypal. Thanks, Rick

11-24-2009, 11:41 AM	#80
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban PM sent. Sharpie

11-24-2009, 11:51 AM	#81
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Parting 1972 K20 suburban Dennis, Sorry for the double post. Money sent via paypal. Let me know when shipped. Includes the side and end trim pieces for the headliner right?

11-30-2009, 06:05 PM	#82
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,170	Re: Parting 1972 K20 suburban sorry for the delay, but heres the piece i need. body line down...its the passenger lower section right behind the door. [IMG][/IMG] __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 11-30-2009 at 06:07 PM.

11-30-2009, 08:41 PM	#83
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban Mines not much better in that area, I do have a truck bed I'm parting that is mint in that section. Wheel arch is the same, would just have to tie it in at the door line. I can get pics of that if you are interested. Thanks, Sharpie

11-30-2009, 08:54 PM	#84
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,170	Re: Parting 1972 K20 suburban my door line is good, just the corner and into the bottom of the wheel arch. truck section would be just fine as long as it works. also, can check the driver side wheel arch? i replaced my driver side quarter panel and for some reason it did not come with the wheel arch indentions. would probably need no more than half the arch line, back half side. if you dont mind, can you post some pics of both? i would prefer the driver side wheel arch to be from the suburban so i know its an exact match...unless you have one from a bed. thanks! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

11-30-2009, 10:45 PM	#85
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: Parting 1972 K20 suburban Just bumping in and got to say Sharpie is a good guy to deal with. Been very happy with my past transactions! Thank's Sharpie! Very upfront and prompt!

11-30-2009, 11:52 PM	#86
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban Thanks SWYFOR5, glad to have happy customers! Working until dark tomorrow, but should be able to get you some pics Wednesday. Thanks, Sharpie

12-01-2009, 12:23 AM	#87
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,170	Re: Parting 1972 K20 suburban thats fine, just pm me when you can post em up. thanks __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-02-2009, 08:19 PM	#88
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban Wheel arch pics for KEV2809.Passenger side of truck arch looks good. Drivers side of sub has rust and the truck is dented pretty bad on that side. I have another truck bed I can check the drivers side on. Thanks, Sharpie Attached Images

12-02-2009, 10:07 PM	#89
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,170	Re: Parting 1972 K20 suburban the first pic would be the driver side rear wheel arch right? i would probably need right about where the dent is above the blue paint...all the way to the bottom of the wheel arch. all about an inch and a half wide so i can cut to fit. heres about what i need... the main part i need is the blue line which is the body lines on the wheel arch, but i would like it cut up to the red line if possible so i can cut it to fit. on the other side, i think i might need that part off of a burban. the truck area seems to round there. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 12-02-2009 at 10:08 PM.

12-03-2009, 09:49 AM	#90
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban I should have labeled my pictures for you. The one you drew on is the passenger side, front of the wheel arch. Thanks, Sharpie



Register or Log In To remove these advertisements.

12-03-2009, 10:50 AM	#91
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: Parting 1972 K20 suburban I'm interested in the E-brake cables, cable holders, and trans hump if available. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

12-03-2009, 06:14 PM	#92
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,170	Re: Parting 1972 K20 suburban oops, lol, I thought it was the other side. do you have a good side like that? you don't have to drill out the spot welds, I can do that. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-05-2009, 06:49 PM	#93
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Parting 1972 K20 suburban Dennis, Does the burb have a factory type (not home made) trailer hitch on it? Rick

12-05-2009, 07:53 PM	#94
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban I will check it over and get some pics. I believe it is the factory type. Sharpie

12-07-2009, 09:23 AM	#95
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: Parting 1972 K20 suburban Hi Rick, the hitch looks homemade. Your headliner package is going out UPS today. Thanks, Dennis

Register or Log In To remove these advertisements.