KS 3rd thread of parts - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

longhorn70gmc · 11-22-2009, 10:21 PM

Hello Randy,
Hope all is well for ya!!!! Hey Bro, I just bought a new Cab Mount set for my 3/4 ton Longhorn and it didn't come with Hardware; would you have a assembled set by chance?
R/
Billy

teeitup · 11-22-2009, 10:58 PM

Hey Billy, things are good here I hope the same with you. Sorry I don't have any hardware, I usually cut them off and never save them.
Take care, Thanks Randy

teeitup · 11-23-2009, 08:52 PM

more pics for tek

teeitup · 11-23-2009, 11:37 PM

pics for Dave, it needs a good cleaning and probably painted too

rico7769 · 11-24-2009, 12:04 AM

Randy,

Do you have a rear view mirror (decent driver shape w/ good reflection) for a 67 GMC CST pkg? I need the mounting bracket (3 screw setup) arm and mirror.
Thanks

teeitup · 11-24-2009, 12:06 AM

Rico, I'll look Tues after work, Thanks Randy

rico7769 · 11-24-2009, 12:07 AM

Randy,

Also curious about an ignition bezel and spacer for the rear of the bezel next to the switch for a 67 GMC.

Thanks

teeitup · 11-24-2009, 02:20 PM

Pics for Dave

teeitup · 11-25-2009, 12:42 AM

Rico, sorry no good mirrors. The 67 bezel and spacer are 67 only, 68-72 are the same, don't have any right now. Thanks Randy

Crispyr1 · 11-25-2009, 12:49 AM

need 68 clears/orange. front grill. wiring. both sides. how much 38053.

teeitup · 11-25-2009, 09:28 AM

I have some front turn signal housing and lens for a 68 but I think thats all. Thanks Randy

s_saunders55 · 12-05-2009, 08:23 PM

Do you have a wiring harness for 72 with a/c. Just looking for the fan switch connections and wires to splice back it in. Thanks, Steve.

teeitup · 12-08-2009, 01:45 PM

Steve, I'll look but I don't think I do. Thanks Randy

ges55 · 12-08-2009, 01:56 PM

Any more green defroster vents? I thought it looked like you had more than one set. Thanks.
Gary

teeitup · 12-08-2009, 02:08 PM

Gary, I'll look I'm sure I do. I'll check after work. Thanks Randy

70c/10barebone · 12-08-2009, 02:11 PM

Hey Randy, I'm looking for a few items with shipping to 33618

a) complete cigg lighter assemby w/wire
b) 3sp trans. arms (the ones the linkage rods attach to at the transmission)
c) radio knobs including tone/trim rings
d) 3sd column shift lever with knob (for 1970) and retaining pin

Thanks, Craig

teeitup · 12-08-2009, 02:16 PM

Craig, I have lighters and assemblies. And radio knobs. No 3 speed stuff right now. I'll get pics and prices after work for you. Thanks Randy

teeitup · 12-08-2009, 06:30 PM

ges55, Gary, I only have one good green vent, the one with the round end on it
70c/10barebone, Craig, here is what I have $27 shipped for all
Thanks Randy

70c/10barebone · 12-08-2009, 11:03 PM

Thanks Randy, I'll take them. PM me your payment info.

By the way I found those 3sd parts I took off 14 yrs ago. Never thought I could locate them.

Craig

dk1972 · 12-08-2009, 11:40 PM

how much for a deluxe wiper knob and lighter

teeitup · 12-08-2009, 11:50 PM

Are you needing the whole lighter assembly or just the lighter? Thanks Randy

ges55 · 12-09-2009, 09:24 AM

Randy: Could I bother you for a picture? I think there are several shades of green. The round one is the one I need. Thanks.
Gary

teeitup · 12-09-2009, 09:13 PM

Gary, I'll get a pic Thursday after work. Thanks Randy

1969stepside · 12-10-2009, 12:05 AM

got any GOOD brown seat belts and goos cst/10 emblems?

teeitup · 12-10-2009, 09:17 AM

Sold the good brown belts I had. I'll look tonight on the emblems. Thanks Randy

11-22-2009, 10:21 PM	#76
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: 3rd thread of parts Hello Randy, Hope all is well for ya!!!! Hey Bro, I just bought a new Cab Mount set for my 3/4 ton Longhorn and it didn't come with Hardware; would you have a assembled set by chance? R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

11-22-2009, 10:58 PM	#77
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 3rd thread of parts Hey Billy, things are good here I hope the same with you. Sorry I don't have any hardware, I usually cut them off and never save them. Take care, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2009, 08:52 PM	#78
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 3rd thread of parts more pics for tek Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-23-2009, 11:37 PM	#79
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 3rd thread of parts pics for Dave, it needs a good cleaning and probably painted too Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-24-2009, 12:04 AM	#80
rico7769 Hybrid67 Join Date: Jan 2009 Location: Martinez, GA Posts: 195	Re: 3rd thread of parts Randy, Do you have a rear view mirror (decent driver shape w/ good reflection) for a 67 GMC CST pkg? I need the mounting bracket (3 screw setup) arm and mirror. Thanks __________________ Keep em' Running! All show.....no go

11-24-2009, 12:06 AM	#81
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 3rd thread of parts Rico, I'll look Tues after work, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-24-2009, 12:07 AM	#82
rico7769 Hybrid67 Join Date: Jan 2009 Location: Martinez, GA Posts: 195	Re: 3rd thread of parts Randy, Also curious about an ignition bezel and spacer for the rear of the bezel next to the switch for a 67 GMC. Thanks __________________ Keep em' Running! All show.....no go

11-24-2009, 02:20 PM	#83
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 3rd thread of parts Pics for Dave Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2009, 12:42 AM	#84
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 3rd thread of parts Rico, sorry no good mirrors. The 67 bezel and spacer are 67 only, 68-72 are the same, don't have any right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-25-2009, 12:49 AM	#85
Crispyr1 Registered User Join Date: Jul 2009 Location: Orange Park, FL Posts: 114	Re: 3rd thread of parts need 68 clears/orange. front grill. wiring. both sides. how much 38053.

11-25-2009, 09:28 AM	#86
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 3rd thread of parts I have some front turn signal housing and lens for a 68 but I think thats all. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-05-2009, 08:23 PM	#87
s_saunders55 Registered User Join Date: Dec 2009 Location: Milwaukee, WI Posts: 1	Re: 3rd thread of parts Do you have a wiring harness for 72 with a/c. Just looking for the fan switch connections and wires to splice back it in. Thanks, Steve.

12-08-2009, 01:45 PM	#88
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 3rd thread of parts Steve, I'll look but I don't think I do. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-08-2009, 01:56 PM	#89
ges55 BLACK SATIN Join Date: Jan 2009 Location: canton, IL Posts: 266	Re: 3rd thread of parts Any more green defroster vents? I thought it looked like you had more than one set. Thanks. Gary __________________ 67 C10 Fleetside LWB-283, 3 on the tree,power assisted steering, father-in-law bought it new 67 C20 Fleetside LWB-'85 305 V8 (original was 250 6 cyl), Holley 600 carb, full length Hedman headers, dual exhaust behind the back wheels, 4 spd , manual steering 85 C10 Silverado- 305ci

12-08-2009, 02:08 PM	#90
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 3rd thread of parts Gary, I'll look I'm sure I do. I'll check after work. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

12-08-2009, 02:11 PM	#91
70c/10barebone Junior Member Join Date: Oct 2006 Location: Lawrence, KS Posts: 79	Re: 3rd thread of parts Hey Randy, I'm looking for a few items with shipping to 33618 a) complete cigg lighter assemby w/wire b) 3sp trans. arms (the ones the linkage rods attach to at the transmission) c) radio knobs including tone/trim rings d) 3sd column shift lever with knob (for 1970) and retaining pin Thanks, Craig __________________ 70 C/10 LWB 250

12-08-2009, 02:16 PM	#92
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 3rd thread of parts Craig, I have lighters and assemblies. And radio knobs. No 3 speed stuff right now. I'll get pics and prices after work for you. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-08-2009, 06:30 PM	#93
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 3rd thread of parts ges55, Gary, I only have one good green vent, the one with the round end on it 70c/10barebone, Craig, here is what I have $27 shipped for all Thanks Randy Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 12-08-2009 at 06:30 PM.

12-08-2009, 11:03 PM	#94
70c/10barebone Junior Member Join Date: Oct 2006 Location: Lawrence, KS Posts: 79	Re: 3rd thread of parts Thanks Randy, I'll take them. PM me your payment info. By the way I found those 3sd parts I took off 14 yrs ago. Never thought I could locate them. Craig __________________ 70 C/10 LWB 250

12-08-2009, 11:40 PM	#95
dk1972 Registered User Join Date: Oct 2009 Location: phoenix arizona Posts: 93	Re: 3rd thread of parts how much for a deluxe wiper knob and lighter __________________ 1972 Cheyenne super 20 original

12-08-2009, 11:50 PM	#96
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 3rd thread of parts Are you needing the whole lighter assembly or just the lighter? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-09-2009, 09:24 AM	#97
ges55 BLACK SATIN Join Date: Jan 2009 Location: canton, IL Posts: 266	Re: 3rd thread of parts Randy: Could I bother you for a picture? I think there are several shades of green. The round one is the one I need. Thanks. Gary __________________ 67 C10 Fleetside LWB-283, 3 on the tree,power assisted steering, father-in-law bought it new 67 C20 Fleetside LWB-'85 305 V8 (original was 250 6 cyl), Holley 600 carb, full length Hedman headers, dual exhaust behind the back wheels, 4 spd , manual steering 85 C10 Silverado- 305ci

12-09-2009, 09:13 PM	#98
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 3rd thread of parts Gary, I'll get a pic Thursday after work. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-10-2009, 12:05 AM	#99
1969stepside Registered User Join Date: Feb 2008 Location: Johnson City Tennessee Posts: 1,176	Re: 3rd thread of parts got any GOOD brown seat belts and goos cst/10 emblems? __________________ Greater love hath no man than to lay down his life for a friend. Members i Have met Earl Slick68 1969 Stepside Build thread http://67-72chevytrucks.com/vboard/s...=1#post4253546 Chevy Trucks the longest lasting most dependable trucks on the road

12-10-2009, 09:17 AM	#100
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 3rd thread of parts Sold the good brown belts I had. I'll look tonight on the emblems. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.