LFD's gas pedal adapters (71-72 gas pedals in 67-70's) - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fatboys69 · 11-19-2009, 08:05 AM

Got mine yesterday, THANKS !!!!

**lolife99** · 11-19-2009, 08:49 AM

Hmmm,... still waiting on mine to arrive. Hopefully today.

jorgensensc · 11-19-2009, 11:41 AM

GOt Mine! Thanks! Looks fantastic with easy to follow directions!
Shawn

Rokcrln · 11-19-2009, 12:14 PM

Quote:

Originally Posted by Hart_Rod

Just showed up,

,

Rob double check your package for an extra shinny flat toy! Sorry guys I owed Rob a piece and used his shipping dime to deliver

Quote:

Originally Posted by lolife99

Hmmm,... still waiting on mine to arrive. Hopefully today.

Should be today but with a name like LoLife what did you really expect!

So for the most part our Post office still has what it takes. They did not go out (the second time) until mid morning Monday and most of you have them 2 days later. If you really think about what they charge for delivery and what that gets you it is amazing!

Kevin
LFD Inc.

Woody · 11-19-2009, 02:14 PM

Just ordered one for my 69 !! PM sent with details...

Woody

**lolife99** · 11-19-2009, 06:20 PM

Got mine today.
Thanks Kevin!

Sinister · 11-19-2009, 10:01 PM

Just got mine, Thanks Kevin.

gcburdic · 11-19-2009, 11:55 PM

Kevin....I hope this isn't a hijack of the thread, but maybe useful for a rookie like me wanting to install one of these....I have a quick question....I have a holley carb (not sure what cfm...could find any #'s on it)...is there anything special I need to hook up the cable to the throttle connection?? Can somebody direct me to what the connection looks like too???

Thanks...
Okay...nowback to the regularly scheduled programing....

Rokcrln · 11-20-2009, 12:01 AM

Quote:

Originally Posted by gcburdic

Kevin....I hope this isn't a hijack of the thread, but maybe useful for a rookie like me wanting to install one of these....I have a quick question....I have a holley carb (not sure what cfm...could find any #'s on it)...is there anything special I need to hook up the cable to the throttle connection?? Can somebody direct me to what the connection looks like too???

Thanks...
Okay...nowback to the regularly scheduled programing....

I do not have the answer as everything I have is fuel Injected

I am sure in the next few days we will start seeing installs and your question should be answered.

Kevin
LFD Inc.

**Hart_Rod** · 11-20-2009, 12:18 AM

Quote:

Originally Posted by gcburdic

Kevin....I hope this isn't a hijack of the thread, but maybe useful for a rookie like me wanting to install one of these....I have a quick question....I have a holley carb (not sure what cfm...could find any #'s on it)...is there anything special I need to hook up the cable to the throttle connection?? Can somebody direct me to what the connection looks like too???

Thanks...
Okay...nowback to the regularly scheduled programing....

Should be a ball stud. If you don't have one, you should be able to pick it up at a hardware store.

http://www.midwestcontrol.com/catdis...ort.php?pg=506

Sinister · 11-22-2009, 01:43 PM

Got to work on my pedal setup today. Going to use a Lokar throttle cable. First pic is factory pedal. 2nd pic is cut and welded to work with the Lokar cable. 3rd is with the cable installed. Had to weld up the factory hole for the throttle cable and redrill. Might redrill and put a plastic bushing in. If you use the Lokar cable you have to use their throttle cable bracket and kickdown setup.
Waiting on a part so I can install when I do my intake and carb.

fatboys69 · 11-30-2009, 03:10 PM

just tried "bolting" mine together with the pedal and plastic bracket and one of the tapped holes doesnt quite line up. Nothing I cant fix by opening up the hole in the plastic base and the sheetmetal retainer. Just an FYI

**67cheby** · 11-30-2009, 04:02 PM

this might sound stupid but i am a little confused if the peddle and cable dont come with it what am i buying ?? i dont see anything else ?? i am interested in switching my 67 over i am running a tbi 350, please tell me what i am overlooking , and can i get a cable to got to the tbi ??

Rokcrln · 11-30-2009, 04:53 PM

Quote:

Originally Posted by fatboys69

just tried "bolting" mine together with the pedal and plastic bracket and one of the tapped holes doesnt quite line up. Nothing I cant fix by opening up the hole in the plastic base and the sheetmetal retainer. Just an FYI

Yes this was addressed in the directions with the same solution you came up with. I have 4 pedals and they all are just off of each other a bit so I made the bracket as close as I could to make all of them work. I found if you just start a few threads in each bolt they will start then tighten them all down. I will also go back and check my jig for good measure. Sorry if it was off a touch.

Quote:

Originally Posted by 67cheby

this might sound stupid but i am a little confused if the peddle and cable dont come with it what am i buying ?? i dont see anything else ?? i am interested in switching my 67 over i am running a tbi 350, please tell me what i am overlooking , and can i get a cable to got to the tbi ??

What you are buying is the adapter plate and hardware that bolts to the 67-70 cab then the 71-72 pedal bolts to that. You should be able to get a cable that will work with your TBI easily.

Kevin
LFD Inc.

fatboys69 · 11-30-2009, 06:31 PM

hey NO PROBLEM !!!! I understand about having to tweek things. To many variables to take into consideration. Appreciate all the help.

Bruce88 · 12-01-2009, 10:56 PM

Hi Kevin of (Lewis Fabrication Design)
I’ve already obtained one of your gas pedal conversion kits and thought you might like to see how I modified the installation instructions to a weld in installation. Thanks for putting a good conversion kit together. You can see my installation on my build post #189 http://67-72chevytrucks.com/vboard/s...45#post3650045

ripdog28 · 12-01-2009, 11:58 PM

I copied Sinister. quick cut and ran a bead. about 10 min tops.

gcburdic · 12-02-2009, 12:18 AM

Hey Sinister....what did that Lokar setup cost ya?

**Hart_Rod** · 12-02-2009, 12:22 AM

Quote:

Originally Posted by ripdog28

I copied Sinister. quick cut and ran a bead. about 10 min tops.

I was able to use the Lokar setup without cutting and welding the end on the pedal. Just remove the clevis on the end of their cable....

Rokcrln · 12-02-2009, 12:24 AM

Quote:

Originally Posted by Bruce88

Hi Kevin of (Lewis Fabrication Design)
I’ve already obtained one of your gas pedal conversion kits and thought you might like to see how I modified the installation instructions to a weld in installation. Thanks for putting a good conversion kit together. You can see my installation on my build post #189 http://67-72chevytrucks.com/vboard/s...45#post3650045

Looks great! I to like the smooth look but I know their are a lot of guys with painted cabs that still need to swap over do to engine conversions or linkage bind or they just want the cable. So I am glad it worked for you and now others have a second way to do it if they want.

Kevin
LFD Inc.

Beelzeburb · 01-03-2010, 01:07 AM

Got mine a while back and I'm finally getting around to playing with it.
I'm taking the cheap way out and modifying my existing '70 pedal assembly to work with the adapter.

I cut both ends off of the mid point in the fulcrum, flipped them and welded them back on. I had to take into account the fact that the adapter moves the bracket and pedal assembly a couple of inches to the left, so when I welded the ends back on I made sure to angle them inward. After double and triple checking the pedal falls right in the middle on one end and the other end that pulls on the throttle cable falls directly in line with my planned hole in the firewall.
All that was left was to chop off and rotate the very end of the rod where the cable passes through, turn it 90 degrees, drill and tap two new holes in the plate and cut the plastic rod retainer down on one end.

This is what I've got right now and so far the mock-up looks promising. I've still got to modify the pass through in the firewall, weld up some extra holes and try bolting it in place.

Sinister · 01-03-2010, 01:32 AM

Quote:

Originally Posted by gcburdic

Hey Sinister....what did that Lokar setup cost ya?

Sorry, I don't remember, DOH. I got it from Summit though.
Edit: Throttle cable was $42, throttle cable bracket was $24, Th400 kickdown switch/cable was around $90. They have kickdown cables for th350's as well.

oldblue1968chevy · 02-18-2010, 08:08 PM

Will this mod work with 350/3ott what else will I need for the install besides cable? What're the advantages with 'locar' throttle cable? Thanks! Do you still have any of these left?

jbristo67 · 02-18-2010, 10:12 PM

I did this exact same thing a long time ago. Putter had a big write up on it on here some where

Rokcrln · 03-06-2010, 10:08 PM

Quote:

Originally Posted by oldblue1968chevy

Will this mod work with 350/3ott what else will I need for the install besides cable? What're the advantages with 'locar' throttle cable? Thanks! Do you still have any of these left?

Yes I have about a dozen left. Two more are going out Monday.

Kevin
LFD Inc.

11-19-2009, 08:05 AM	#76
fatboys69 Registered User Join Date: Aug 2006 Location: Dayton, Tennessee Posts: 447	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Got mine yesterday, THANKS !!!!

11-19-2009, 08:49 AM	#77
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Hmmm,... still waiting on mine to arrive. Hopefully today. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-19-2009, 11:41 AM	#78
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) GOt Mine! Thanks! Looks fantastic with easy to follow directions! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

11-19-2009, 02:14 PM	#80
Woody Registered User Join Date: Feb 2000 Location: Georgetown, KY, USA Posts: 631	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Just ordered one for my 69 !! PM sent with details... Woody

11-19-2009, 06:20 PM	#81
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Got mine today. Thanks Kevin! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-19-2009, 10:01 PM	#82
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Just got mine, Thanks Kevin. __________________ Beat it to fit, Paint it to match...

11-19-2009, 11:55 PM	#83
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Kevin....I hope this isn't a hijack of the thread, but maybe useful for a rookie like me wanting to install one of these....I have a quick question....I have a holley carb (not sure what cfm...could find any #'s on it)...is there anything special I need to hook up the cable to the throttle connection?? Can somebody direct me to what the connection looks like too??? Thanks... Okay...nowback to the regularly scheduled programing.... __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

11-22-2009, 01:43 PM	#86
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Got to work on my pedal setup today. Going to use a Lokar throttle cable. First pic is factory pedal. 2nd pic is cut and welded to work with the Lokar cable. 3rd is with the cable installed. Had to weld up the factory hole for the throttle cable and redrill. Might redrill and put a plastic bushing in. If you use the Lokar cable you have to use their throttle cable bracket and kickdown setup. Waiting on a part so I can install when I do my intake and carb. __________________ Beat it to fit, Paint it to match... Last edited by Sinister; 11-22-2009 at 07:25 PM.

11-30-2009, 03:10 PM	#87
fatboys69 Registered User Join Date: Aug 2006 Location: Dayton, Tennessee Posts: 447	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) just tried "bolting" mine together with the pedal and plastic bracket and one of the tapped holes doesnt quite line up. Nothing I cant fix by opening up the hole in the plastic base and the sheetmetal retainer. Just an FYI

11-30-2009, 04:02 PM	#88
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) this might sound stupid but i am a little confused if the peddle and cable dont come with it what am i buying ?? i dont see anything else ?? i am interested in switching my 67 over i am running a tbi 350, please tell me what i am overlooking , and can i get a cable to got to the tbi ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-30-2009, 06:31 PM	#90
fatboys69 Registered User Join Date: Aug 2006 Location: Dayton, Tennessee Posts: 447	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) hey NO PROBLEM !!!! I understand about having to tweek things. To many variables to take into consideration. Appreciate all the help.

12-01-2009, 10:56 PM	#91
Bruce88 Registered User Join Date: Oct 2008 Location: Everett, WA Posts: 326	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Hi Kevin of (Lewis Fabrication Design) I’ve already obtained one of your gas pedal conversion kits and thought you might like to see how I modified the installation instructions to a weld in installation. Thanks for putting a good conversion kit together. You can see my installation on my build post #189 http://67-72chevytrucks.com/vboard/s...45#post3650045 __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=318544

12-01-2009, 11:58 PM	#92
ripdog28 Registered User Join Date: Apr 2008 Location: Imperial Beach, CA Posts: 1,040	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) I copied Sinister. quick cut and ran a bead. about 10 min tops. Attached Images __________________ 69 c-10 BBC 462ci, forged crank, H-beam rods, 10.5-1 KB forged pistons, Dart Iron Eagle 308cc, Straub Cam, Comp Cams chrome moly full rollers, Weiand Team G, Prosystems 950, TH400/3500 Dalenzie stall, Currie 9+ Detroit Locker w/31spline axles.3.5/6in drop. My Build.

12-02-2009, 12:18 AM	#93
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Hey Sinister....what did that Lokar setup cost ya? __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present Last edited by gcburdic; 12-02-2009 at 12:18 AM.

01-03-2010, 01:07 AM	#96
Beelzeburb Devil's in the Details Join Date: Sep 2008 Location: Southern Utah Posts: 353	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Got mine a while back and I'm finally getting around to playing with it. I'm taking the cheap way out and modifying my existing '70 pedal assembly to work with the adapter. I cut both ends off of the mid point in the fulcrum, flipped them and welded them back on. I had to take into account the fact that the adapter moves the bracket and pedal assembly a couple of inches to the left, so when I welded the ends back on I made sure to angle them inward. After double and triple checking the pedal falls right in the middle on one end and the other end that pulls on the throttle cable falls directly in line with my planned hole in the firewall. All that was left was to chop off and rotate the very end of the rod where the cable passes through, turn it 90 degrees, drill and tap two new holes in the plate and cut the plastic rod retainer down on one end. This is what I've got right now and so far the mock-up looks promising. I've still got to modify the pass through in the firewall, weld up some extra holes and try bolting it in place. __________________ '70 K10 Suburban - TBI 454, 4L80E, NP241C, Dana 60 & 44 - The 10+ Year Project Thread Datsun 240Z, 510 2 door and an old Honda motorcycle Last edited by Beelzeburb; 01-03-2010 at 01:08 AM.



Register or Log In To remove these advertisements.

02-18-2010, 08:08 PM	#98
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) Will this mod work with 350/3ott what else will I need for the install besides cable? What're the advantages with 'locar' throttle cable? Thanks! Do you still have any of these left? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

02-18-2010, 10:12 PM	#99
jbristo67 resident oilfield trash Join Date: Jan 2009 Location: Lubbock TX Posts: 1,465	Re: LFD's gas pedal adapters (71-72 gas pedals in 67-70's) I did this exact same thing a long time ago. Putter had a big write up on it on here some where __________________ 1967 SWB C10 396/400 factory air factory tach (sadly had to send to a new home) 1986 Honda 70 Fourtrax 1991 Chevrolet K5 blazer 2wd 1982 Mastercraft Pro Star 190 Stars and Stripes 2002 Chevrolet Tahoe 2011 Nissan Armada

Register or Log In To remove these advertisements.