63 We are bagging and tubbing at the shop.. - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stepside83 · 03-13-2010, 02:47 PM

how do you shade the tail lights so the lenses arent so bright, but still light up red when being used thanks

72BlckButy · 03-13-2010, 03:41 PM

Quote:

Originally Posted by stepside83

how do you shade the tail lights so the lenses arent so bright, but still light up red when being used thanks

Check out this search I did on google, it will provide you with some info. There are sprays that you can use, as well as other methods.

http://www.google.com/search?hl=en&s...qi=g1&aql=&oq=

c10addict · 03-15-2010, 08:55 AM

Quote:

Originally Posted by SCOTI

Answered on post #63 above. . . ....

With those BS numbers, the math indicates the rear wasn't narrowed.

Actually we took 8" out of the rear.... But honestly we could have went with less B.S. cause the wheels are tucked in a little too far... We were worried about the tire hitting the front of the bedside..

c10addict · 03-15-2010, 08:56 AM

Quote:

Originally Posted by stepside83

how do you shade the tail lights so the lenses arent so bright, but still light up red when being used thanks

We scuff them and spray them with a tinted clear.... Seems to work better than the rattle can sprays... After we spray them we sand and lightly buff them..

1Bad62Pro/Street · 03-15-2010, 10:06 AM

Sweeeet!

SCOTI · 03-15-2010, 10:18 AM

Quote:

Originally Posted by c10addict

Actually we took 8" out of the rear.... But honestly we could have went with less B.S. cause the wheels are tucked in a little too far... We were worried about the tire hitting the front of the bedside..

The math worked out for an un-narrowed housing too. I reviewed the pics & you can tell visibly that there's a pretty good gap between the outside tire edge & the inner bed wall indicating that the housing was narrowed.

Any change planned for the rears or just going as is?

c10addict · 03-15-2010, 10:28 AM

Quote:

Originally Posted by SCOTI

The math worked out for an un-narrowed housing too. I reviewed the pics & you can tell visibly that there's a pretty good gap between the outside tire edge & the inner bed wall indicating that the housing was narrowed.

Any change planned for the rears or just going as is?

Actually when narrowed the rear the plan was to run a 20x15 with a bigger tire but the measurments were TIGHT on the front of the wheel opening on the bedside... We were going to move the rear end housing back to center the wheel and give us more space but really didn't want to cut apart the new street challenge kit so we went with the 20x12.... We either get the wheel re-hooped or just run a spacer....

*CWT* · 05-17-2010, 11:22 AM

I seen a small bit of ink for this ride in the new Custom Classic Trucks at the Detroit Autorama. Looks good. Congrats.

c10addict · 05-17-2010, 04:47 PM

Thanks... I will have to look for that...

likaroc13 · 06-10-2010, 04:07 PM

any good underside pics of this rig? i can see it a bit, but i'm specifically looking for exhaust routing...also, any updates on this truck? thanks

smashingchuck · 01-31-2011, 09:07 PM

What tool is used to make those inner bedsides?

c10addict · 02-01-2011, 09:18 AM

Quote:

Originally Posted by smashingchuck

What tool is used to make those inner bedsides?

We use a Bead Roller to give the panels the embossed look..

MalibuKasey · 02-01-2011, 10:40 AM

You guys do some killer work!!

likaroc13 · 02-01-2011, 06:08 PM

any other pics of this thing finished up?

MalibuKasey · 04-20-2011, 03:04 PM

OK.... Im curious because I need a set. The 2x4 wood stands the trucks sitting on in the pics.... those are just 2x4s right? Whats the rough dimensions of them?

SCOTI · 04-20-2011, 04:21 PM

Quote:

Originally Posted by MalibuKasey

OK.... Im curious because I need a set. The 2x4 wood stands the trucks sitting on in the pics.... those are just 2x4s right? Whats the rough dimensions of them?

The 'infamous' DSE stands. Poor mans lift

.....

**67cheby** · 04-20-2011, 05:29 PM

WOW...in need to come over to this side more Love this truck !!

c10addict · 04-20-2011, 07:08 PM

Quote:

Originally Posted by SCOTI

The 'infamous' DSE stands. Poor mans lift

.....

I think they stole the idea from us!!! I can't remember who we stole the idea from thought!!!

16" long 2x4 cut and screwed together... Works great! You determine the height!! You can even cover them material and use them to display your ride at shows...

c10addict · 04-20-2011, 07:11 PM

Actually we just picked the truck up and brought it back to the shop to do a little work.. I will get some good pics of it!

c10addict · 05-21-2011, 09:47 AM

As I promised.. More pics!! We just brought it back and stitched up a set cover and a set of door panels and made a little center console..

c10addict · 05-21-2011, 09:49 AM

Few more!

LeftCoast32 · 05-21-2011, 09:52 AM

That is a gorgeous truck!!

**67cheby** · 05-21-2011, 09:53 AM

WOW...WOW..and double WOW

Brandonc20 · 05-21-2011, 10:19 AM

Love it! wish I had money lol

mbgmike · 05-21-2011, 11:07 AM

That is one of the nicest I've seen. I always loved the black and red ones. Excellent Work.

03-13-2010, 02:47 PM	#76
stepside83 Registered User Join Date: Jan 2010 Location: butler pa Posts: 328	Re: 63 We are bagging and tubbing at the shop.. how do you shade the tail lights so the lenses arent so bright, but still light up red when being used thanks

03-15-2010, 10:06 AM	#80
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: 63 We are bagging and tubbing at the shop.. Sweeeet! __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

05-17-2010, 11:22 AM	#83
CWT Account Suspended Join Date: Jun 2009 Location: ARAB,ALABAMA Posts: 157	Re: 63 We are bagging and tubbing at the shop.. I seen a small bit of ink for this ride in the new Custom Classic Trucks at the Detroit Autorama. Looks good. Congrats.

05-17-2010, 04:47 PM	#84
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: 63 We are bagging and tubbing at the shop.. Thanks... I will have to look for that... __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

06-10-2010, 04:07 PM	#85
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: 63 We are bagging and tubbing at the shop.. any good underside pics of this rig? i can see it a bit, but i'm specifically looking for exhaust routing...also, any updates on this truck? thanks

01-31-2011, 09:07 PM	#86
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: 63 We are bagging and tubbing at the shop.. What tool is used to make those inner bedsides? __________________ 78 Build Thread 4Runner Build

02-01-2011, 10:40 AM	#88
MalibuKasey Artist Join Date: Jan 2010 Location: Rockwell NC Posts: 422	Re: 63 We are bagging and tubbing at the shop.. You guys do some killer work!! __________________ 66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66

02-01-2011, 06:08 PM	#89
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: 63 We are bagging and tubbing at the shop.. any other pics of this thing finished up?

04-20-2011, 03:04 PM	#90
MalibuKasey Artist Join Date: Jan 2010 Location: Rockwell NC Posts: 422	Re: 63 We are bagging and tubbing at the shop.. OK.... Im curious because I need a set. The 2x4 wood stands the trucks sitting on in the pics.... those are just 2x4s right? Whats the rough dimensions of them? __________________ 66 Chevy C10 283ci~cough~ SBW Fleet Buttercup '66

04-20-2011, 05:29 PM	#92
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 63 We are bagging and tubbing at the shop.. WOW...in need to come over to this side more Love this truck !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-20-2011, 07:11 PM	#94
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: 63 We are bagging and tubbing at the shop.. Actually we just picked the truck up and brought it back to the shop to do a little work.. I will get some good pics of it! __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

05-21-2011, 09:47 AM	#95
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: 63 We are bagging and tubbing at the shop.. As I promised.. More pics!! We just brought it back and stitched up a set cover and a set of door panels and made a little center console.. Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

05-21-2011, 09:49 AM	#96
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: 63 We are bagging and tubbing at the shop.. Few more! Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile Last edited by c10addict; 05-21-2011 at 09:52 AM.

05-21-2011, 09:52 AM	#97
LeftCoast32 Custom Builder Join Date: Jun 2003 Location: Carlsbad, California Posts: 908	Re: 63 We are bagging and tubbing at the shop.. That is a gorgeous truck!! __________________ 1932 Chevy Roadster Car and Pick-Up - http://67-72chevytrucks.com/vboard/s...d.php?t=465709 1966 K20 Factory 4X4 - http://67-72chevytrucks.com/vboard/s...d.php?t=455484 (Sold) 1972 K5 Blazer (Sold) - http://67-72chevytrucks.com/vboard/s...ad.php?t=87530 2007 TrailBlazer SS - http://67-72chevytrucks.com/vboard/s...34#post4706534

05-21-2011, 09:53 AM	#98
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 63 We are bagging and tubbing at the shop.. WOW...WOW..and double WOW __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

05-21-2011, 10:19 AM	#99
Brandonc20 Registered User Join Date: May 2011 Location: Santa Clarita California Posts: 118	Re: 63 We are bagging and tubbing at the shop.. Love it! wish I had money lol

05-21-2011, 11:07 AM	#100
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: 63 We are bagging and tubbing at the shop.. That is one of the nicest I've seen. I always loved the black and red ones. Excellent Work.

Register or Log In To remove these advertisements.