WY 1971 4x4 blazer parts - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*sharpie1972* · 01-28-2010, 08:53 PM

Transfer case skid plate with crossmember. $150 shipped. Badpeanut has first shot. Thanks, Sharpie

swyfor5 · 01-28-2010, 08:57 PM

Nice pic's Sharpie! Already picked one up, but that one looks good!

badpeanut · 01-28-2010, 09:56 PM

Quote:

Originally Posted by sharpie1972

Transfer case skid plate with crossmember. $150 shipped. Badpeanut has first shot. Thanks, Sharpie

I'll take it! Sending PayPal...

68 C-10 Panel · 02-05-2010, 08:00 PM

Hey sharpie, the door panels showed up today. They fit great and look good. I had a heck of a time finding those little square nuts that go in the door for the arm rests, but once I found some the rest was cake. Thanks for the window cranks and all the screws and such, its nice to see the whole thing in operating condition. One more notch off the ghetto list for the old girl.

Thanks.

newagecustom · 02-05-2010, 11:40 PM

I am looking for all 8 leaf spring hangers. Any rust through? Shipped to 85017

*sharpie1972* · 02-06-2010, 10:10 AM

No spring hangers right now. Thanks, Sharpie

rawraw67 · 02-06-2010, 10:02 PM

any horns ? I am looking for the daul setup,I have the one but need the second one.

*sharpie1972* · 02-06-2010, 10:03 PM

Yes, I have a few of the dual horn setups. Which one do you need? One should have a "H" inside a circle, the other one should have an empty circle. Thanks, Sharpie

rawraw67 · 02-06-2010, 10:10 PM

not sure what I have,can you post a picture of the high and the low? do they have any numbers on them ?

*sharpie1972* · 02-06-2010, 10:16 PM

Rawraw: This set came off a 72. What year are you looking for? I have a set still on a 67 that I can check for you as well. Thanks, Sharpie

rawraw67 · 02-06-2010, 10:24 PM

I have a 1970 with a 67 clip.I have the horn on the left,so am thinking this is the low.can you post a picture of the bottom with the brackets ? what do you want for the set ?

*sharpie1972* · 02-06-2010, 10:30 PM

Rawraw: pics of the bottom. I will have to test them tomorrow. Thanks, Sharpie

rawraw67 · 02-08-2010, 08:01 PM

Hey Sharpie any luck on checking the horns ? Thanks rawraw

*sharpie1972* · 02-08-2010, 09:47 PM

Rawraw: Only the Low side produced sweet Chevrolet music! I can check on my other sets for you tomorrow. Thanks, Sharpie

Conroe trucker · 02-08-2010, 10:43 PM

I need a set of perfect Rally trim rings if you find some......

Mike

*sharpie1972* · 02-08-2010, 10:45 PM

Hi Mike, I'll let you know if I come up with any. All of mine have seen "trail time" in Wyoming. Dennis

angelo_32806 · 02-09-2010, 02:03 PM

If you cut one up I am interested in the A pilars and top of the windshield frame
Thanks
Lee

rawraw67 · 02-09-2010, 07:16 PM

what do you want for just the low side ? Thanks rawraw

**bignbad** · 02-13-2010, 05:32 PM

do you have the gas pedal assembly that has the cable that goes up to the dash for the throttle knod (pto) set up?The 1 gauge cluster you have or had has the hole in it for that set up.I dont need that i just need the pedal assembley and the cable that goes to the dash....Eric

*sharpie1972* · 02-14-2010, 10:35 AM

Rawraw: $15 shipped on the low side or $30 for a pair. I'll test other high sides that I have to make a pair.
Bignbad: Yes, I have several of the throttle control set-ups. $50 shipped.
Thanks, Sharpie

rawraw67 · 02-14-2010, 01:02 PM

sharpie I am going to pass.Thanks

**bigdon-70blazer** · 03-05-2010, 12:30 AM

Do you think you would part with these exhaust hanger parts? They are on the drivers side of the blazer and I want to use them on the passenger side.

*sharpie1972* · 03-05-2010, 10:10 AM

Bigdon: All my Blazers sold. I have a Jimmy coming in that I will check for you. Thanks, Sharpie

**bigdon-70blazer** · 03-05-2010, 11:25 AM

Quote:

Originally Posted by sharpie1972

Bigdon: All my Blazers sold. I have a Jimmy coming in that I will check for you. Thanks, Sharpie

Thanks...

01-28-2010, 08:53 PM	#76
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Transfer case skid plate with crossmember. $150 shipped. Badpeanut has first shot. Thanks, Sharpie Attached Images

01-28-2010, 08:57 PM	#77
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: 1971 4x4 blazer parts Nice pic's Sharpie! Already picked one up, but that one looks good!

02-05-2010, 08:00 PM	#79
68 C-10 Panel Registered User Join Date: Apr 2009 Location: MI Posts: 88	Re: 1971 4x4 blazer parts Hey sharpie, the door panels showed up today. They fit great and look good. I had a heck of a time finding those little square nuts that go in the door for the arm rests, but once I found some the rest was cake. Thanks for the window cranks and all the screws and such, its nice to see the whole thing in operating condition. One more notch off the ghetto list for the old girl. Thanks. __________________ 68 C-10 Panel (fixing) 250-6,3ott 93 k1500 pickup DD "When a man is old enough to figure out his dad was right, he has a son who thinks he's wrong" Charles Wadsworth

02-05-2010, 11:40 PM	#80
newagecustom c10 Chop Artist Join Date: Feb 2007 Location: az Posts: 481	Re: 1971 4x4 blazer parts I am looking for all 8 leaf spring hangers. Any rust through? Shipped to 85017

02-06-2010, 10:10 AM	#81
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts No spring hangers right now. Thanks, Sharpie

02-06-2010, 10:02 PM	#82
rawraw67 Registered User Join Date: Dec 2007 Location: Bay the Bay Posts: 483	Re: 1971 4x4 blazer parts any horns ? I am looking for the daul setup,I have the one but need the second one.

02-06-2010, 10:03 PM	#83
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Yes, I have a few of the dual horn setups. Which one do you need? One should have a "H" inside a circle, the other one should have an empty circle. Thanks, Sharpie Last edited by sharpie1972; 02-06-2010 at 10:07 PM.

02-06-2010, 10:10 PM	#84
rawraw67 Registered User Join Date: Dec 2007 Location: Bay the Bay Posts: 483	Re: 1971 4x4 blazer parts not sure what I have,can you post a picture of the high and the low? do they have any numbers on them ?

02-06-2010, 10:16 PM	#85
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Rawraw: This set came off a 72. What year are you looking for? I have a set still on a 67 that I can check for you as well. Thanks, Sharpie Attached Images

02-06-2010, 10:24 PM	#86
rawraw67 Registered User Join Date: Dec 2007 Location: Bay the Bay Posts: 483	Re: 1971 4x4 blazer parts I have a 1970 with a 67 clip.I have the horn on the left,so am thinking this is the low.can you post a picture of the bottom with the brackets ? what do you want for the set ?

02-06-2010, 10:30 PM	#87
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Rawraw: pics of the bottom. I will have to test them tomorrow. Thanks, Sharpie Attached Images

02-08-2010, 08:01 PM	#88
rawraw67 Registered User Join Date: Dec 2007 Location: Bay the Bay Posts: 483	Re: 1971 4x4 blazer parts Hey Sharpie any luck on checking the horns ? Thanks rawraw

02-08-2010, 09:47 PM	#89
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Rawraw: Only the Low side produced sweet Chevrolet music! I can check on my other sets for you tomorrow. Thanks, Sharpie

02-08-2010, 10:43 PM	#90
Conroe trucker SWBs: 67 2x4, 67 4x4, 70 4x4 Join Date: Nov 2007 Location: Conroe, TX Posts: 483	Re: 1971 4x4 blazer parts I need a set of perfect Rally trim rings if you find some...... Mike __________________ FINISHED Project thread: 67 SWB 4x4 FINISHED Project thread: 67 SWB 6 cyl cruiser Project thread: Road Toad 70 SWB Step, 4x4, 292, 3OT 01 C5 convertable 08 Z06

02-08-2010, 10:45 PM	#91
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Hi Mike, I'll let you know if I come up with any. All of mine have seen "trail time" in Wyoming. Dennis



Register or Log In To remove these advertisements.

02-09-2010, 02:03 PM	#92
angelo_32806 Registered User Join Date: May 2009 Location: Orlando FL Posts: 107	Re: 1971 4x4 blazer parts If you cut one up I am interested in the A pilars and top of the windshield frame Thanks Lee

02-09-2010, 07:16 PM	#93
rawraw67 Registered User Join Date: Dec 2007 Location: Bay the Bay Posts: 483	Re: 1971 4x4 blazer parts what do you want for just the low side ? Thanks rawraw

02-13-2010, 05:32 PM	#94
bignbad Registered User Join Date: Jan 2009 Location: highspire,pa Posts: 423	Re: 1971 4x4 blazer parts do you have the gas pedal assembly that has the cable that goes up to the dash for the throttle knod (pto) set up?The 1 gauge cluster you have or had has the hole in it for that set up.I dont need that i just need the pedal assembley and the cable that goes to the dash....Eric __________________ '72 chevy k20 '06 H-D Springer softail http://www.bluemooncruisers.com/ http://www.enginecycle.com/ ~Eric

02-14-2010, 10:35 AM	#95
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Rawraw: $15 shipped on the low side or $30 for a pair. I'll test other high sides that I have to make a pair. Bignbad: Yes, I have several of the throttle control set-ups. $50 shipped. Thanks, Sharpie

02-14-2010, 01:02 PM	#96
rawraw67 Registered User Join Date: Dec 2007 Location: Bay the Bay Posts: 483	Re: 1971 4x4 blazer parts sharpie I am going to pass.Thanks

03-05-2010, 12:30 AM	#97
bigdon-70blazer Registered User Join Date: Jan 2007 Location: Poplar Bluff, MO Posts: 1,502	Re: 1971 4x4 blazer parts Do you think you would part with these exhaust hanger parts? They are on the drivers side of the blazer and I want to use them on the passenger side. Attached Images

03-05-2010, 10:10 AM	#98
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: 1971 4x4 blazer parts Bigdon: All my Blazers sold. I have a Jimmy coming in that I will check for you. Thanks, Sharpie

Register or Log In To remove these advertisements.