KS parting a 72 highlander with AC now - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Capt Kurt · 04-28-2010, 07:41 PM

Could you send me a left and right picture of the brackets that are attached to the truck frame that go to the motor mounts.
If they are the ones I need how much are they selling for Thanks
LOST ON LAND BUT NEVER AT SEA CAPT. KURT

jcsbrat · 04-28-2010, 08:04 PM

How much for the chrome ring and plate for ignition?
And/or the door locks if keys are available?
Ship to 47387 Thanks

teeitup · 04-28-2010, 09:33 PM

Walkersan, unsure of ratio, I won't be able to get ratio till next week, sorry
hatchaddict, shipping out fed ex Thurs
Capt Kurt, I'll try to get you a pic, I've already taken them off and the motor is just sitting in there
jcsbrat, It will be next week before I can get to that, the truck will still be here, sorry
Guys I getting ready to go to a swap meet Fri and Sat, so if you ask about parts I'll price and I need to know real quick if you want them so I won't sell them
Thanks Randy

hatchaddict · 04-28-2010, 09:42 PM

ok sounds good thanks again

Capt Kurt · 04-28-2010, 10:34 PM

Thank you
If they fit my motor mounts I will need both of them
I was told my mounts are from a 1970 to 73 chevy truck
[ dropping a 292 inline 6 into my swampbuggy ]

Walkersan · 04-29-2010, 09:34 AM

Randy

Thanks for the response. The truck has sat for a few years, another week won't hurt anything.

Good luck at the swap meet.

Shawn

vette442 · 04-30-2010, 03:58 PM

Just read through the thread. Doesn't look like anyone claimed the shoulder belt mounting bolts or the rectangular cast metal A/C dash vent housing if you have these parts. If you do, how much shipped to 15317? Thanks.
Terry

teeitup · 05-01-2010, 07:14 PM

capt Kurt, inline 6's take different brackets
Walkersan, I'll get a ratio sometime this week
vette442, Terry, bolts are sold. Not sure on what your meaning on AC piece? The one under AC control?
Thanks Randy

Capt Kurt · 05-01-2010, 08:10 PM

I have the brackets on my inline 292 chevy.
I also have the motor mounts that are from 1970 to 1973 chevy on the 292 brackets.
I need the 2 brackets from the trucks frame to the motor mounts.
can you send me a picture of both of them and measure across from hole to hole on the top that connects to the motor mount thanks. Capt KurtKurt

teeitup · 05-01-2010, 08:17 PM

I have to apologize, I sold my sets that I had at the swap meet this weekend. I'm sorry. I'll have another set in a week or so on another truck. Thanks Randy

71 super · 05-01-2010, 10:16 PM

Randy if you have the air cleaner and spacer from this truck I will take them as well. My list now has breather, spacer and set of valve covers with two oil fill plugs. Shoot me a pm with total, thanks Harold

teeitup · 05-02-2010, 09:05 AM

Harold, I have the air cleaner and spacer but have sold the valve covers already, sorry. I'll get you a total asap. Thanks Randy

hatchaddict · 05-02-2010, 05:46 PM

what all a/c parts are still avalible? im in need of a condensor and all the lines under the hood and a compressor. i bought all the stuff thats in cab or on the cab but i need the rest

70LonghornCST · 05-02-2010, 06:22 PM

Do you still have the little clamp that holds the muffler to the AC pump? I also need the bolt that holds connects the muffler to the back of the AC pump. If so, how much shipped to 95357?

teeitup · 05-03-2010, 08:09 AM

hatchaddict, I'll get a pic of what I do have, do you need motor AC brackets?
70longhornCST, I'll see what is there
Thanks Randy

hatchaddict · 05-03-2010, 01:39 PM

yes i do need ac comp brackets too thanks

teeitup · 05-04-2010, 04:51 PM

Sorry for delay guys I'm down in the back, I'll try to get pics when I get around a bit. Thanks Randy

hatchaddict · 05-04-2010, 07:25 PM

im in no hurry it just gives me time to save up the cash

longhorn70gmc · 05-04-2010, 09:24 PM

Hey Randy,
This truck is going kuik, anyway did you still have those auto dealership badges on the cowl still. I am in no hurry. I just wish I could go to your house and by a bunch of stuff. I need a few big items like top Longhorn trim and a decent tailgate, but I am way out here in Cali. Hope your feeling better if I read your post right, take care.
R/
Billy

jc · 05-07-2010, 12:43 AM

randy,
i would like the 7 blade fan as long as it fits a stock fan shroud.
can you let me know a price shipped to 08527 and a measurement across tip to tip.

thanks john

k5hart · 05-07-2010, 07:12 AM

Randy,

Got the alt. brackets. Look good. Thanks!

teeitup · 05-07-2010, 08:06 AM

Hatchaddict, I'll hopefully be back at it Mon
Billy, I hurt my back so I'm taking it easy. The badges have some pitting on them, I'll get a pic
John, sorry sold the fan at the swap meet, sorry
K5hart, glad they go there OK, Thanks
Randy

hatchaddict · 05-08-2010, 07:06 PM

hey randy i hope your back is getting better. whenever you get back at it i need to see what all a/c stuff you got cause the stuff i was going to buy for my cab from a local was all trash so i didnt buy it, so i need a whole complete a/c system from inside out or as much of it as you have including the cowl door and the passenger vent door stuff. i dont need the wiring but i do need the switches and relays and stuff thanks and im in no hurry so get better first

teeitup · 05-09-2010, 09:49 AM

Hatchaddict, back is doing a bit better, I'm going to Dr Mon afternoon for a CT scan, they think I have a Ulcer or Pancreas problems now along with back issues. Anyway sorry for the soap opera. I'm going to try to get together all I have for one. I know I don't have any good lines that go from under battery box to dryer and also no lines form dryer to condensor. I have a used dryer and brackets, condensor, compressor brackets, lines that go from compressor to box on outer firewall. I don't have the flapper in cowl. I have the pass side vent. I have some of the stuff under dash but not all. I have a good ac control and all dash vents. I'll try to get what i have all together either Mon after I get back or Tues after I get off work, Its all still in my enclosed trailer boxed up from swap meet. I have another truck bought but won't be getting it till next Mon. I may have another BB AC truck bought going to try to go look at it next Sat. Thanks Randy

hatchaddict · 05-09-2010, 10:14 AM

Quote:

Originally Posted by teeitup

Hatchaddict, back is doing a bit better, I'm going to Dr Mon afternoon for a CT scan, they think I have a Ulcer or Pancreas problems now along with back issues. Anyway sorry for the soap opera. I'm going to try to get together all I have for one. I know I don't have any good lines that go from under battery box to dryer and also no lines form dryer to condensor. I have a used dryer and brackets, condensor, compressor brackets, lines that go from compressor to box on outer firewall. I don't have the flapper in cowl. I have the pass side vent. I have some of the stuff under dash but not all. I have a good ac control and all dash vents. I'll try to get what i have all together either Mon after I get back or Tues after I get off work, Its all still in my enclosed trailer boxed up from swap meet. I have another truck bought but won't be getting it till next Mon. I may have another BB AC truck bought going to try to go look at it next Sat. Thanks Randy

thanks i appriciate it. i have a good a/c wire harness and i have all the dash vents and a good control and i have a new dryer, i will need the inner and outer boxes, compressor, brackets, condensor, dryer brackets, the pass vent, and whatever else you have to help me build a complete a/c system

04-28-2010, 07:41 PM	#76
Capt Kurt Registered User Join Date: Apr 2010 Location: fort myers fl Posts: 15	Re: parting a 72 highlander with AC now Could you send me a left and right picture of the brackets that are attached to the truck frame that go to the motor mounts. If they are the ones I need how much are they selling for Thanks LOST ON LAND BUT NEVER AT SEA CAPT. KURT

04-28-2010, 08:04 PM	#77
jcsbrat Registered User Join Date: Jul 2009 Location: New Castle, Indiana Posts: 49	Re: parting a 72 highlander with AC now How much for the chrome ring and plate for ignition? And/or the door locks if keys are available? Ship to 47387 Thanks

04-28-2010, 09:33 PM	#78
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 72 highlander with AC now Walkersan, unsure of ratio, I won't be able to get ratio till next week, sorry hatchaddict, shipping out fed ex Thurs Capt Kurt, I'll try to get you a pic, I've already taken them off and the motor is just sitting in there jcsbrat, It will be next week before I can get to that, the truck will still be here, sorry Guys I getting ready to go to a swap meet Fri and Sat, so if you ask about parts I'll price and I need to know real quick if you want them so I won't sell them Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-28-2010, 09:42 PM	#79
hatchaddict Registered User Join Date: Feb 2010 Location: pittsburgh, pa Posts: 184	Re: parting a 72 highlander with AC now ok sounds good thanks again

04-28-2010, 10:34 PM	#80
Capt Kurt Registered User Join Date: Apr 2010 Location: fort myers fl Posts: 15	Re: parting a 72 highlander with AC now Thank you If they fit my motor mounts I will need both of them I was told my mounts are from a 1970 to 73 chevy truck [ dropping a 292 inline 6 into my swampbuggy ]

04-29-2010, 09:34 AM	#81
Walkersan Registered User Join Date: Apr 2007 Location: Lee Summit, MO Posts: 16	Re: parting a 72 highlander with AC now Randy Thanks for the response. The truck has sat for a few years, another week won't hurt anything. Good luck at the swap meet. Shawn

04-30-2010, 03:58 PM	#82
vette442 Registered User Join Date: Feb 2007 Location: McMurray, PA Posts: 46	Re: parting a 72 highlander with AC now Just read through the thread. Doesn't look like anyone claimed the shoulder belt mounting bolts or the rectangular cast metal A/C dash vent housing if you have these parts. If you do, how much shipped to 15317? Thanks. Terry __________________ '72 C-10 Highlander LWB '96 Corvette LT4 Coll. Ed. '72 455/M20 Cutlass Supreme (1 of 77) '72 442 455/TH400 '70 Cutlass Supreme SX455 conv. '72 Cutlass Supreme 350/TH350

05-01-2010, 07:14 PM	#83
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 72 highlander with AC now capt Kurt, inline 6's take different brackets Walkersan, I'll get a ratio sometime this week vette442, Terry, bolts are sold. Not sure on what your meaning on AC piece? The one under AC control? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-01-2010, 08:10 PM	#84
Capt Kurt Registered User Join Date: Apr 2010 Location: fort myers fl Posts: 15	Re: parting a 72 highlander with AC now I have the brackets on my inline 292 chevy. I also have the motor mounts that are from 1970 to 1973 chevy on the 292 brackets. I need the 2 brackets from the trucks frame to the motor mounts. can you send me a picture of both of them and measure across from hole to hole on the top that connects to the motor mount thanks. Capt KurtKurt

05-01-2010, 08:17 PM	#85
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 72 highlander with AC now I have to apologize, I sold my sets that I had at the swap meet this weekend. I'm sorry. I'll have another set in a week or so on another truck. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-01-2010, 10:16 PM	#86
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: parting a 72 highlander with AC now Randy if you have the air cleaner and spacer from this truck I will take them as well. My list now has breather, spacer and set of valve covers with two oil fill plugs. Shoot me a pm with total, thanks Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

05-02-2010, 09:05 AM	#87
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 72 highlander with AC now Harold, I have the air cleaner and spacer but have sold the valve covers already, sorry. I'll get you a total asap. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-02-2010, 05:46 PM	#88
hatchaddict Registered User Join Date: Feb 2010 Location: pittsburgh, pa Posts: 184	Re: parting a 72 highlander with AC now what all a/c parts are still avalible? im in need of a condensor and all the lines under the hood and a compressor. i bought all the stuff thats in cab or on the cab but i need the rest

05-02-2010, 06:22 PM	#89
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: parting a 72 highlander with AC now Do you still have the little clamp that holds the muffler to the AC pump? I also need the bolt that holds connects the muffler to the back of the AC pump. If so, how much shipped to 95357? Attached Images __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal Last edited by 70LonghornCST; 05-02-2010 at 06:22 PM.

05-03-2010, 08:09 AM	#90
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 72 highlander with AC now hatchaddict, I'll get a pic of what I do have, do you need motor AC brackets? 70longhornCST, I'll see what is there Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

05-03-2010, 01:39 PM	#91
hatchaddict Registered User Join Date: Feb 2010 Location: pittsburgh, pa Posts: 184	Re: parting a 72 highlander with AC now yes i do need ac comp brackets too thanks

05-04-2010, 04:51 PM	#92
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 72 highlander with AC now Sorry for delay guys I'm down in the back, I'll try to get pics when I get around a bit. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-04-2010, 07:25 PM	#93
hatchaddict Registered User Join Date: Feb 2010 Location: pittsburgh, pa Posts: 184	Re: parting a 72 highlander with AC now im in no hurry it just gives me time to save up the cash

05-04-2010, 09:24 PM	#94
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: parting a 72 highlander with AC now Hey Randy, This truck is going kuik, anyway did you still have those auto dealership badges on the cowl still. I am in no hurry. I just wish I could go to your house and by a bunch of stuff. I need a few big items like top Longhorn trim and a decent tailgate, but I am way out here in Cali. Hope your feeling better if I read your post right, take care. R/ Billy __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

05-07-2010, 12:43 AM	#95
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	Re: parting a 72 highlander with AC now randy, i would like the 7 blade fan as long as it fits a stock fan shroud. can you let me know a price shipped to 08527 and a measurement across tip to tip. thanks john __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

05-07-2010, 07:12 AM	#96
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	Re: parting a 72 highlander with AC now Randy, Got the alt. brackets. Look good. Thanks! __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

05-07-2010, 08:06 AM	#97
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 72 highlander with AC now Hatchaddict, I'll hopefully be back at it Mon Billy, I hurt my back so I'm taking it easy. The badges have some pitting on them, I'll get a pic John, sorry sold the fan at the swap meet, sorry K5hart, glad they go there OK, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-08-2010, 07:06 PM	#98
hatchaddict Registered User Join Date: Feb 2010 Location: pittsburgh, pa Posts: 184	Re: parting a 72 highlander with AC now hey randy i hope your back is getting better. whenever you get back at it i need to see what all a/c stuff you got cause the stuff i was going to buy for my cab from a local was all trash so i didnt buy it, so i need a whole complete a/c system from inside out or as much of it as you have including the cowl door and the passenger vent door stuff. i dont need the wiring but i do need the switches and relays and stuff thanks and im in no hurry so get better first

05-09-2010, 09:49 AM	#99
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting a 72 highlander with AC now Hatchaddict, back is doing a bit better, I'm going to Dr Mon afternoon for a CT scan, they think I have a Ulcer or Pancreas problems now along with back issues. Anyway sorry for the soap opera. I'm going to try to get together all I have for one. I know I don't have any good lines that go from under battery box to dryer and also no lines form dryer to condensor. I have a used dryer and brackets, condensor, compressor brackets, lines that go from compressor to box on outer firewall. I don't have the flapper in cowl. I have the pass side vent. I have some of the stuff under dash but not all. I have a good ac control and all dash vents. I'll try to get what i have all together either Mon after I get back or Tues after I get off work, Its all still in my enclosed trailer boxed up from swap meet. I have another truck bought but won't be getting it till next Mon. I may have another BB AC truck bought going to try to go look at it next Sat. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.