My 54 GMC Build

[docrock]

went with the 93 column. nicer wheel and operation

[docrock]

[docrock]

[docrock]

i had to cut the shift arm because I forgot to slide the outer tube before welding. iIt is a lot more room in the cab. Next step I think I will raise the bracket a little higher to hide the lower bracket and tighten the gap at the dash

[docrock]

Decided my fire wall needed some bling so I cut up the original valve cover and buffed it so it would look worn.

[docrock]

Not much going on with this project. I have been working on a 49 Olds Woodie and a 49 Ford Woodie lately, but hopefully will get back to this project next month. Funny how time flies on these builds.

[docrock]

i bought windshield weather strip form lmc and it didnt quite fit right and my windshield was not staying all the way in. Picked up a new one from Stelle and it fits great.

[docrock]

Posted via Mobile Device
Much better fit then the other seal
Posted via Mobile Device
Posted via Mobile Device

[docrock]

Posted via Mobile Device
Posted via Mobile Device

[docrock]

Worked on fender today. Sand fill prime repeat
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

[docrock]

Posted via Mobile Devicegot some paint on a fender today
Posted via Mobile Device

[docrock]

Posted via Mobile Devicecleaned up the wheel and put the hub cover on. I am starting lik this truck
Posted via Mobile Device

[docrock]

Posted via Mobile Devicethis is the look I am going for but I might paint the running boards satin black
Posted via Mobile Device

[docrock]

Posted via Mobile Devicemoved the oil cooler to under because the radiator location was where the grill attached. The cooling fan is going to be pushing and when I add the ac unit it will have to fit in there some where too. So under is it.
Posted via Mobile Device

[docrock]

The bumper will cover this area and this cooler is made out of steel
Posted via Mobile Device

[docrock]

Posted via Mobile Deviceput some more pieces on and built a battery box
Posted via Mobile Device

[docrock]

Posted via Mobile Devicewhile working the fender and hood and waiting for high build to dry I started outing the bed back together. Go to get the height right for the running boards and the side aprons. I cut the gas filler door out of the 93 truck so I am going to reuse it. Thinking about making a tool box with a removable bottom so if the fuel pump fails I don't have to drop the tank. Anyway lots of measuring
Posted via Mobile Device

[docrock]

Posted via Mobile Device
Posted via Mobile Device

[solidaxel]

Originally Posted by docrock

Posted via Mobile Devicethis is the look I am going for but I might paint the running boards satin black
Posted via Mobile Device

Nice choice on color.
I had the same problem with LMC window rubber but Steel cured that for me also

[docrock]

Originally Posted by solidaxel

Nice choice on color.
I had the same problem with LMC window rubber but Steel cured that for me also

Thanks for checking out my project
Posted via Mobile Device

[docrock]

Posted via Mobile Device
Installed one of the new headlights from a jeep cj. It has the removable bulb. Bought the plug adapter on eBay to plug into the 93 harness
Posted via Mobile Device

[kdog3121]

nice, i like that. can you give us some more details on the parts for the cj headlight conversion?

[kdog3121]

H4?

[docrock]

2007 Jeep Liberty Headlight Housing with the black mounting taken off then use the standard retainer and ring. The bulb is a 9008 or H13 and the socket matches the bulb. working on lighting it up next week

[kdog3121]

thanks!