MY Blazer build - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HI OFCR · 02-01-2011, 12:08 PM

Quote:

Originally Posted by Ronnie Mehling

It was going to be done on friday but there were some things that dident go so smoothly the window rubber that i ordered from lmc is hard as a rock and little to big so the glass guy is going to get some better rubber to use. he scratched two of the fresh tinted windows. the front drive line needs to be shortened about an inch. ok now here is the crazy part the door roll up windows are a 1/4 inch below the weather stripping when you roll them all of the way up has anyone had this problem the only thing i can think of that would cause this is the linex on the bed rails but its not that thick. thanks for all of the support it should be done the middle of this week.

Very interested to hear what you find out on the windows. I am running into a very similiar problem with mine. They do not seal up at the back corners of the glass where it meet the top. Please keep us posted.

scoyote · 02-01-2011, 10:56 PM

Very nice build....just found it.

Everything appears top notch.....I'll keep watching.

dujobu · 02-24-2011, 10:56 AM

Quote:

Originally Posted by Ronnie Mehling

They are for a pick up i could not find new ones for a blazer I GOT THEM FROM LMC

Is this the floor pan you bought?…
http://www.lmctruck.com/icatalog/cb/full.aspx?Page=25

Did you have to make any modifications? I have a '71 4x4 K5 that needs a new floor. Any advice would be much appreciated.

Burt4x4 · 02-24-2011, 11:18 AM

I think you need to follow me up the hill so we can get that thing all dirty and break it in fer ya!

Nice K5! Bring it too BlazerFest in July

thor · 02-24-2011, 04:02 PM

This rig is awesome! Nice build!

Ronnie Mehling · 02-24-2011, 10:54 PM

Quote:

Originally Posted by HI OFCR

Very interested to hear what you find out on the windows. I am running into a very similiar problem with mine. They do not seal up at the back corners of the glass where it meet the top. Please keep us posted.

i still cant figure it out im not sure if its the weatherstripping or what

Ronnie Mehling · 02-24-2011, 10:57 PM

Quote:

Originally Posted by dujobu

Is this the floor pan you bought?…
http://www.lmctruck.com/icatalog/cb/full.aspx?Page=25

Did you have to make any modifications? I have a '71 4x4 K5 that needs a new floor. Any advice would be much appreciated.

thats the one that i used. i had fab unlimited do it for me. but they seemed to fit pretty well.

Ronnie Mehling · 02-24-2011, 10:59 PM

Quote:

Originally Posted by elzombo

What exactly did you do for AC/Heater setup? It looks like you covered up the circle hole on the passenger side of the firewall? (Sorry...not sure what it's called)

its a vintage air set up

Ronnie Mehling · 02-24-2011, 11:23 PM

Well i have been busy i havent had internet for the last month but i just got it back i just moved out of my old house remodeled it and rented it out. and the house i moved into i remodeled it and moved in way way to much work. got the blazer on the road had some small issues but nothing to major the first prob was the shifting solenoid was bad it would not go into first gear got that taken care of and then i couldent get it to idle i had the speed sensors mixed up the front was on the back and the back was on the front so when it was trying to idle it thought it was going 25mph that was an easy fix. put it on the dyno and it made 275hp to the wheels and 300#s of torque i was hoping for a little more but it runs good i wish i would have put a truck intake on it instead of the ls6 intake the truck intake would have made more torque i will post more pictures soon.

jonesky2 · 02-25-2011, 09:50 PM

Quote:

Originally Posted by Ronnie Mehling

Well i have been busy i havent had internet for the last month but i just got it back i just moved out of my old house remodeled it and rented it out. and the house i moved into i remodeled it and moved in way way to much work. got the blazer on the road had some small issues but nothing to major the first prob was the shifting solenoid was bad it would not go into first gear got that taken care of and then i couldent get it to idle i had the speed sensors mixed up the front was on the back and the back was on the front so when it was trying to idle it thought it was going 25mph that was an easy fix. put it on the dyno and it made 275hp to the wheels and 300#s of torque i was hoping for a little more but it runs good i wish i would have put a truck intake on it instead of the ls6 intake the truck intake would have made more torque i will post more pictures soon.

are you happy with it?

Ronnie Mehling · 02-25-2011, 10:32 PM

Quote:

Originally Posted by jonesky2

are you happy with it?

OHH hell yes its a blast i just need more time to play hahahah

VA72C10 · 03-02-2011, 01:43 AM

cool build. moved to the projects and builds forum!

madkmart · 03-16-2011, 12:04 AM

awesome build just amazing love the color to with the black top

boonedogs72 · 05-17-2011, 05:05 PM

anymore updated photos???

dujobu · 06-04-2011, 10:20 PM

Dumb question, but I'm new to this stuff…what's the benefit of going with a sleek aftermarket gas tank for a Blazer then just the stock replacements available from LMC or other company?

Ronnie Mehling · 06-18-2011, 01:00 PM

Quote:

Originally Posted by dujobu

Dumb question, but I'm new to this stuff…what's the benefit of going with a sleek aftermarket gas tank for a Blazer then just the stock replacements available from LMC or other company?

I just wanted a stainless one the old one was all steel had problems with rust

Ronnie Mehling · 06-18-2011, 01:03 PM

Well i moved to my new house still dont have internet set up. I took one of my wireless units from work so i can use the internet again here are some pictures of the latest adventures i have been on.

Ronnie Mehling · 06-18-2011, 01:12 PM

Here are the latest.

Ronnie Mehling · 06-18-2011, 01:21 PM

I have had some bad luck with the blazer. the first time i took it to pismo it blew the brand new drive lines right out of it. The 2nd trip i took it on a guy hit me with a trailer in a parking lot and a half hour later a rock broke my window.

Ronnie Mehling · 06-18-2011, 01:25 PM

So i got a new project to work on

**Thealien** · 06-18-2011, 01:40 PM

very nice blazer. Sorry about your luck! I can relate though, I got rear ended in my Jimmy today.

FRENCHBLUE72 · 06-18-2011, 02:02 PM

Sucks about the blazer seems like there is always something..

**jamie72** · 06-18-2011, 04:41 PM

great looking blazer... i hope the guy pays for the damage to you truck..

VA72C10 · 06-18-2011, 04:59 PM

Quote:

Originally Posted by jamie72

great looking blazer... i hope the guy pays for the damage to you truck..

both blazers are cool!

boonedogs72 · 06-20-2011, 09:40 PM

the coolest blazer i have seen yet!

02-01-2011, 10:56 PM	#77
scoyote Registered User Join Date: Oct 2008 Location: On the shores of Bull Shoals, AR Posts: 509	Re: MY Blazer build Very nice build....just found it. Everything appears top notch.....I'll keep watching. __________________ 1972 Blazer - Bronco Orange - In the werks http://67-72chevytrucks.com/vboard/s...d.php?t=323444 1991 F250 - Hunting truck w/ Detroit rear locker, ARB front locker, front and rear winches .... and more.... 1997 Grand Cherokee - fun jeep - Detroit rear locker, ARB front locker, front winch, 411 gears, lots of lights ;-) 2004 Hot Rod DuraMax - Dnyo'd at the wheels with 525 HP and 1100 lbs torque.....mustang killer.

02-24-2011, 11:18 AM	#79
Burt4x4 Registered User Join Date: Feb 2000 Location: Modesto, CA Posts: 1,842	Re: MY Blazer build I think you need to follow me up the hill so we can get that thing all dirty and break it in fer ya! Nice K5! Bring it too BlazerFest in July __________________ 1972 K5 MPFI454/Sm465/Np205/D60/14FFd/Re-Centerd H1s w/Swamper Iroks

02-24-2011, 04:02 PM	#80
thor Registered User Join Date: Apr 2008 Location: Redmond, WA Posts: 679	Re: MY Blazer build This rig is awesome! Nice build! __________________ 1972 Chevy Blazer CST.....Project: Polished Turd

02-24-2011, 11:23 PM	#84
Ronnie Mehling Registered User Join Date: Dec 2010 Location: Fresno california Posts: 60	Re: MY Blazer build Well i have been busy i havent had internet for the last month but i just got it back i just moved out of my old house remodeled it and rented it out. and the house i moved into i remodeled it and moved in way way to much work. got the blazer on the road had some small issues but nothing to major the first prob was the shifting solenoid was bad it would not go into first gear got that taken care of and then i couldent get it to idle i had the speed sensors mixed up the front was on the back and the back was on the front so when it was trying to idle it thought it was going 25mph that was an easy fix. put it on the dyno and it made 275hp to the wheels and 300#s of torque i was hoping for a little more but it runs good i wish i would have put a truck intake on it instead of the ls6 intake the truck intake would have made more torque i will post more pictures soon.

03-02-2011, 01:43 AM	#87
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: MY Blazer build cool build. moved to the projects and builds forum! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-16-2011, 12:04 AM	#88
madkmart Registered User Join Date: Jul 2009 Location: Covington, Ga Posts: 55	Re: MY Blazer build awesome build just amazing love the color to with the black top

05-17-2011, 05:05 PM	#89
boonedogs72 Registered User Join Date: Apr 2005 Location: redding ca Posts: 1,438	Re: MY Blazer build anymore updated photos???

06-04-2011, 10:20 PM	#90
dujobu Registered User Join Date: Jul 2010 Location: Wilmington, DE Posts: 639	Re: MY Blazer build Dumb question, but I'm new to this stuff…what's the benefit of going with a sleek aftermarket gas tank for a Blazer then just the stock replacements available from LMC or other company?

06-18-2011, 01:03 PM	#92
Ronnie Mehling Registered User Join Date: Dec 2010 Location: Fresno california Posts: 60	Re: MY Blazer build Well i moved to my new house still dont have internet set up. I took one of my wireless units from work so i can use the internet again here are some pictures of the latest adventures i have been on.

06-18-2011, 01:12 PM	#93
Ronnie Mehling Registered User Join Date: Dec 2010 Location: Fresno california Posts: 60	Re: MY Blazer build Here are the latest. Attached Images

06-18-2011, 01:21 PM	#94
Ronnie Mehling Registered User Join Date: Dec 2010 Location: Fresno california Posts: 60	Re: MY Blazer build I have had some bad luck with the blazer. the first time i took it to pismo it blew the brand new drive lines right out of it. The 2nd trip i took it on a guy hit me with a trailer in a parking lot and a half hour later a rock broke my window. Attached Images

06-18-2011, 01:25 PM	#95
Ronnie Mehling Registered User Join Date: Dec 2010 Location: Fresno california Posts: 60	Re: MY Blazer build So i got a new project to work on Attached Images

06-18-2011, 01:40 PM	#96
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,134	Re: MY Blazer build very nice blazer. Sorry about your luck! I can relate though, I got rear ended in my Jimmy today. __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

06-18-2011, 02:02 PM	#97
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: MY Blazer build Sucks about the blazer seems like there is always something.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-18-2011, 04:41 PM	#98
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: MY Blazer build great looking blazer... i hope the guy pays for the damage to you truck.. __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com



Register or Log In To remove these advertisements.

06-20-2011, 09:40 PM	#100
boonedogs72 Registered User Join Date: Apr 2005 Location: redding ca Posts: 1,438	Re: MY Blazer build the coolest blazer i have seen yet!

Register or Log In To remove these advertisements.