Barbwire Customs Project#1 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 03-14-2012, 08:17 PM

I just think the racelines are better looking.. Besides every truck including mine has 5 spokes similar to coys... Check out mikes wheels(aka cheby) his are different and stand out..

zacthrasher · 03-18-2012, 08:55 PM

Quote:

Originally Posted by FRENCHBLUE72

I just think the racelines are better looking.. Besides every truck including mine has 5 spokes similar to coys... Check out mikes wheels(aka cheby) his are different and stand out..

Name: 13_bonneville_black.jpg
Views: 1258
Size: 38.7 KB

Yea I really like these, especially the color and older style but the Boyd Wheels are a bit pricey for this build.

Unless, you have any ideas on how I could get them to sponsor this truck and give me the wheels.

zacthrasher · 04-01-2012, 04:19 PM

Getting closer to driver worthy! We now have the exhaust tips mounted and the rear roll pan temporarily installed...

Name: IMG_0149[1].jpg
Views: 1207
Size: 32.0 KB

Name: IMG_0149[1].jpg
Views: 1207
Size: 32.0 KB

Name: IMG_0150[1].jpg
Views: 1197
Size: 39.4 KB

Name: IMG_0151.jpg
Views: 1198
Size: 64.2 KB

Name: IMG_0152.jpg
Views: 1194
Size: 53.5 KB

zacthrasher · 04-01-2012, 09:00 PM

Quote:

Originally Posted by MJs69CST

Looking sharp! Love the way that exhaust exits the rear.

Thanks! We had to sacrifice hiding the fuel tank but I think it was well worth it, we are excited to see it all together with the tailgate and a fresh coat of paint.

zacthrasher · 04-02-2012, 11:16 PM

Here is a few more pictures, we put a few bolts in the bumper but still lack a couple of brackets. Also here is a picture of the tank being redone, there were a few pin holes therefore we had a few bubbles in the paint. So we re-coated the inside with some more tank sealer from POR-15. I think the sealer is a really good product if you properly follow directions.

Name: IMG_0153.jpg
Views: 1146
Size: 34.8 KB

Name: IMG_0153.jpg
Views: 1146
Size: 34.8 KB

Name: IMG_0154.jpg
Views: 1128
Size: 30.2 KB

VA72C10 · 04-02-2012, 11:23 PM

Quote:

Originally Posted by MJs69CST

Looking sharp! Love the way that exhaust exits the rear.

really like that!

zacthrasher · 04-03-2012, 08:29 PM

Quote:

Originally Posted by VA72C10

really like that!

Yea it turned out really nice, thanks!

Tinkermc · 04-03-2012, 08:56 PM

I like what ur doin

zacthrasher · 05-14-2012, 07:33 PM

We are back at it and we are very close to final assembly! Here are a few teaser pictures...

Name: IMG_0167.jpg
Views: 1041
Size: 40.2 KB

Name: IMG_0168.jpg
Views: 1037
Size: 35.9 KB

Name: IMG_0170.jpg
Views: 1041
Size: 50.7 KB

zacthrasher · 06-02-2012, 10:36 PM

I helped my dad clean up the Vette for a local car show a couple of weeks ago and saw a nice C10.

Name: IMG_0172.jpg
Views: 989
Size: 49.1 KB

Name: IMG_0174.jpg
Views: 995
Size: 38.5 KB

Name: IMG_0175.jpg
Views: 979
Size: 39.7 KB

Name: IMG_0176.jpg
Views: 994
Size: 57.0 KB

zacthrasher · 06-02-2012, 10:51 PM

We are making progress on the old beast!!!! We now have the bed all together including the fuel tank!!! We lack some odds and ends but we are close to some wet sanding and a final coat of paint.

Name: IMG_0186.jpg
Views: 977
Size: 42.9 KB

Name: IMG_0186.jpg
Views: 977
Size: 42.9 KB

Name: IMG_0187.jpg
Views: 981
Size: 38.7 KB

Name: IMG_0188.jpg
Views: 985
Size: 37.6 KB

Name: IMG_0190.jpg
Views: 980
Size: 30.6 KB

Name: IMG_0185.jpg
Views: 986
Size: 59.7 KB

VA72C10 · 06-02-2012, 11:14 PM

Looking good and sweeeet vet!

**oldman3** · 06-03-2012, 12:20 AM

Taking shape, nice work...Jim

zacthrasher · 06-03-2012, 11:40 PM

Quote:

Originally Posted by VA72C10

Looking good and sweeeet vet!

Thanks! Yea the Vette was a 8 to 9 year project with my Dad, we are very proud of it.

Quote:

Originally Posted by oldman3

Taking shape, nice work...Jim

Yes it is finally taking shape! Thanks.

**67cheby** · 06-04-2012, 09:59 AM

looking good man !

Tinkermc · 06-04-2012, 03:19 PM

well I just reread the entire thread and the truck looks very nice

zacthrasher · 06-05-2012, 11:52 PM

Quote:

Originally Posted by 67cheby

looking good man !

Quote:

Originally Posted by Tinkermc

well I just reread the entire thread and the truck looks very nice

Thank you both! Its is a good feeling getting this close to finishing!

zacthrasher · 09-04-2012, 07:27 PM

It has been awhile but we are getting closer. We are now able to drive it but we lack some interior work, a few odds and ends and a final coat of paint. Here are some pictures of us pulling her out for the first time in a long time in which you can tell with the thick layer of dust. Here are some pictures.

Name: IMG_0237.jpg
Views: 791
Size: 109.6 KB

Name: IMG_0237.jpg
Views: 791
Size: 109.6 KB

Name: IMG_0236.jpg
Views: 785
Size: 109.2 KB

Name: IMG_0238.jpg
Views: 788
Size: 85.0 KB

Name: IMG_0240.jpg
Views: 796
Size: 80.7 KB

Name: IMG_0242.jpg
Views: 794
Size: 56.7 KB

zacthrasher · 09-04-2012, 07:37 PM

And some more pictures...

Name: IMG_0245.jpg
Views: 788
Size: 69.0 KB

Name: IMG_0246.jpg
Views: 786
Size: 104.9 KB

Name: IMG_0247.jpg
Views: 759
Size: 102.6 KB

Name: IMG_0248.jpg
Views: 755
Size: 30.8 KB

**oldman3** · 09-04-2012, 07:58 PM

Thanks for the update, nice pics...Jim

FRENCHBLUE72 · 09-04-2012, 08:11 PM

Looks like she is really coming along ...

**67cheby** · 09-05-2012, 10:35 AM

looking great, nice taillights !

Tinkermc · 09-05-2012, 05:07 PM

my choice would be the wheels in picture number 2 in the first set of four. Truck looks great

zacthrasher · 09-05-2012, 09:46 PM

Quote:

Originally Posted by Tinkermc

my choice would be the wheels in picture number 2 in the first set of four. Truck looks great

Yea I like the Raceline's also. But I am also leaning towards the Rocket Wheels. I can't make up my mind......Thanks for the post

68GMCCustom · 09-11-2012, 11:47 PM

nice build and great work!

03-14-2012, 08:17 PM	#76
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Barbwire Customs Project#1 I just think the racelines are better looking.. Besides every truck including mine has 5 spokes similar to coys... Check out mikes wheels(aka cheby) his are different and stand out.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-01-2012, 04:19 PM	#78
zacthrasher Registered User Join Date: Sep 2008 Location: Amarillo, TX Posts: 140	Re: Barbwire Customs Project#1 Getting closer to driver worthy! We now have the exhaust tips mounted and the rear roll pan temporarily installed... __________________ My 67 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=473825

04-02-2012, 11:16 PM	#80
zacthrasher Registered User Join Date: Sep 2008 Location: Amarillo, TX Posts: 140	Re: Barbwire Customs Project#1 Here is a few more pictures, we put a few bolts in the bumper but still lack a couple of brackets. Also here is a picture of the tank being redone, there were a few pin holes therefore we had a few bubbles in the paint. So we re-coated the inside with some more tank sealer from POR-15. I think the sealer is a really good product if you properly follow directions. __________________ My 67 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=473825

04-03-2012, 08:56 PM	#83
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Barbwire Customs Project#1 I like what ur doin

05-14-2012, 07:33 PM	#84
zacthrasher Registered User Join Date: Sep 2008 Location: Amarillo, TX Posts: 140	Re: Barbwire Customs Project#1 We are back at it and we are very close to final assembly! Here are a few teaser pictures... __________________ My 67 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=473825

06-02-2012, 10:36 PM	#85
zacthrasher Registered User Join Date: Sep 2008 Location: Amarillo, TX Posts: 140	Re: Barbwire Customs Project#1 I helped my dad clean up the Vette for a local car show a couple of weeks ago and saw a nice C10. __________________ My 67 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=473825

06-02-2012, 10:51 PM	#86
zacthrasher Registered User Join Date: Sep 2008 Location: Amarillo, TX Posts: 140	Re: Barbwire Customs Project#1 We are making progress on the old beast!!!! We now have the bed all together including the fuel tank!!! We lack some odds and ends but we are close to some wet sanding and a final coat of paint. __________________ My 67 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=473825

06-02-2012, 11:14 PM	#87
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Barbwire Customs Project#1 Looking good and sweeeet vet! __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-03-2012, 12:20 AM	#88
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,560	Re: Barbwire Customs Project#1 Taking shape, nice work...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

06-04-2012, 09:59 AM	#90
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Barbwire Customs Project#1 looking good man ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

06-04-2012, 03:19 PM	#91
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Barbwire Customs Project#1 well I just reread the entire thread and the truck looks very nice

09-04-2012, 07:27 PM	#93
zacthrasher Registered User Join Date: Sep 2008 Location: Amarillo, TX Posts: 140	Re: Barbwire Customs Project#1 It has been awhile but we are getting closer. We are now able to drive it but we lack some interior work, a few odds and ends and a final coat of paint. Here are some pictures of us pulling her out for the first time in a long time in which you can tell with the thick layer of dust. Here are some pictures. __________________ My 67 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=473825

09-04-2012, 07:37 PM	#94
zacthrasher Registered User Join Date: Sep 2008 Location: Amarillo, TX Posts: 140	Re: Barbwire Customs Project#1 And some more pictures... __________________ My 67 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=473825

09-04-2012, 07:58 PM	#95
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,560	Re: Barbwire Customs Project#1 Thanks for the update, nice pics...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

09-04-2012, 08:11 PM	#96
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Barbwire Customs Project#1 Looks like she is really coming along ... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

09-05-2012, 10:35 AM	#97
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Barbwire Customs Project#1 looking great, nice taillights ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-05-2012, 05:07 PM	#98
Tinkermc Registered User Join Date: Jul 2011 Location: Farmville, Va Posts: 3,026	Re: Barbwire Customs Project#1 my choice would be the wheels in picture number 2 in the first set of four. Truck looks great

09-11-2012, 11:47 PM	#100
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Barbwire Customs Project#1 nice build and great work! __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

Register or Log In To remove these advertisements.