KS 72 c20 getting parted now - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 12-02-2011, 12:04 AM

Hubscrub, I need this carb, I have 3 others out there I'd sell for $12 each plus shipping. Thanks Randy

jays68yak · 12-02-2011, 01:19 AM

Quote:

Originally Posted by teeitup

When you say sockets, are you meaning the wiring for side markers and the tail light and back up light housings? I don't have any rear wiring for taillights and backup lights and on the side markers I would just cut the wiring and you'd have to splice in.

Yes the housings. The correct words were escaping me at the time.

Hubscrub · 12-02-2011, 06:00 PM

Quote:

Originally Posted by teeitup

Hubscrub, I need this carb, I have 3 others out there I'd sell for $12 each plus shipping. Thanks Randy

ok, l'll take them if there all Q-jets pending shipping cost. pm sent

**haskell** · 12-02-2011, 06:43 PM

What diameter is the sway bar? Will it fit a 3/4t 4wd?

Tim

teeitup · 12-02-2011, 07:12 PM

Jays68yak, $35 shipped for all lens and all 4 taillight and backup light housings

Hubscrub, I pm'd you and I'll get a quote

Haskell, Tim, sorry it won't work on a 4x4 only 2wd

Thanks Randy

teeitup · 12-02-2011, 07:34 PM

carb pics, one looks silver

Hubscrub · 12-03-2011, 12:04 AM

i'll take the carbs, do you still have the factroy speaker bracket that bolts under the dash? If you have a junk speaker i will take that too if it will fit in the box. (i cut them up to mount 3 1/2'' speakers under there) i seen them on one of your threads. if so i need one please

Zoomin · 12-03-2011, 12:45 AM

Complete tailgate and hinges?
Posted via Mobile Device

teeitup · 12-03-2011, 09:24 AM

Hubscrub, I have speaker brackets are you needing the set of 3 or which ones for sure, I may have a junk speaker I will look

Zoomin, this gate is junk, its dented up and ripped in a couple spots

Thanks Randy

Hubscrub · 12-03-2011, 04:07 PM

Quote:

Originally Posted by teeitup

Hubscrub, I have speaker brackets are you needing the set of 3 or which ones for sure, I may have a junk speaker I will look

Zoomin, this gate is junk, its dented up and ripped in a couple spots

Thanks Randy

i just need the one for the big center speaker, i got a pic off you other thread

teeitup · 12-03-2011, 06:48 PM

I got you covered, it will be in the box, Thanks Randy

teeitup · 12-03-2011, 08:12 PM

pics for Mrdana60

effects66 · 12-03-2011, 11:00 PM

Interested in the High Hump. Is it in good shape? Does it have the hole for the manual shift or automatic?

Thanks

mightymouse · 12-03-2011, 11:20 PM

is the out side heater-box still available? and is it nice cond? how much$..thanks..johnny

Hubscrub · 12-03-2011, 11:28 PM

Payment Sent

thanks

teeitup · 12-04-2011, 10:01 AM

effects66, Its a 4 speed high hump, I will try to get it out today and get pics

mightymouse, Johnny, I'll check it out haven't got truck torn down that far yet, been rainy and cold here

Hubscrub, shipping out Mon, Thanks

Randy

Horsman · 12-04-2011, 08:32 PM

Sounds nutty, but would like to buy the two front rubber disc brake hoses. Hopefully I can use them either to match some new ones up or have them restored to reuse. Thanks in advance.

jays68yak · 12-04-2011, 08:38 PM

Quote:

Originally Posted by teeitup

Jays68yak, $35 shipped for all lens and all 4 taillight and backup light housings

Hubscrub, I pm'd you and I'll get a quote

Haskell, Tim, sorry it won't work on a 4x4 only 2wdill

Thanks Randy

Sounds good. ill paypal you once I get off the couch.
Posted via Mobile Device

teeitup · 12-04-2011, 11:55 PM

Horsman, sorry I sell all front end stuff complete

Jays68yak, sounds good

Thanks Randy

Bert W · 12-05-2011, 03:13 PM

I need the alternator brackets, if not sold already. 2 PMs sent.

teeitup · 12-07-2011, 09:16 AM

Pics for David, 1st couple are the ones on my blazer, the last pic is the set I have

Bert W · 12-08-2011, 01:17 AM

Randy, money on it's way. Thanks!

409impala1 · 12-08-2011, 02:33 PM

how much for the tow hooks?

Pillow · 12-08-2011, 09:10 PM

I'm sending you a PM.

Thanks!

teeitup · 12-10-2011, 01:05 PM

Guys I'm out of commission till Tues, sorry. Thanks Randy

12-02-2011, 12:04 AM	#76
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 c20 getting parted now Hubscrub, I need this carb, I have 3 others out there I'd sell for $12 each plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-02-2011, 06:43 PM	#79
haskell Registered User Join Date: Apr 2008 Location: Indianapolis, IN Posts: 391	Re: 72 c20 getting parted now What diameter is the sway bar? Will it fit a 3/4t 4wd? Tim __________________ 1969 Chev Longhorn Custom Camper 1955 Buick Century Estate Wagon 1963 Buick Riviera 1953 Chevy 3100 Panel 1967 C-20 V8 4 speed 1951 Willys Jeep Wagon 1956 Chevy Suburban

12-02-2011, 07:12 PM	#80
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 c20 getting parted now Jays68yak, $35 shipped for all lens and all 4 taillight and backup light housings Hubscrub, I pm'd you and I'll get a quote Haskell, Tim, sorry it won't work on a 4x4 only 2wd Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-02-2011, 07:34 PM	#81
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 c20 getting parted now carb pics, one looks silver Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-03-2011, 12:04 AM	#82
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: 72 c20 getting parted now i'll take the carbs, do you still have the factroy speaker bracket that bolts under the dash? If you have a junk speaker i will take that too if it will fit in the box. (i cut them up to mount 3 1/2'' speakers under there) i seen them on one of your threads. if so i need one please __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14 Last edited by Hubscrub; 12-03-2011 at 12:17 AM.

12-03-2011, 12:45 AM	#83
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 72 c20 getting parted now Complete tailgate and hinges? Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

12-03-2011, 09:24 AM	#84
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 c20 getting parted now Hubscrub, I have speaker brackets are you needing the set of 3 or which ones for sure, I may have a junk speaker I will look Zoomin, this gate is junk, its dented up and ripped in a couple spots Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-03-2011, 06:48 PM	#86
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 c20 getting parted now I got you covered, it will be in the box, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-03-2011, 08:12 PM	#87
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 c20 getting parted now pics for Mrdana60 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-03-2011, 11:00 PM	#88
effects66 Registered User Join Date: Dec 2008 Location: San Jose Posts: 206	Re: 72 c20 getting parted now Interested in the High Hump. Is it in good shape? Does it have the hole for the manual shift or automatic? Thanks

12-03-2011, 11:20 PM	#89
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	Re: 72 c20 getting parted now is the out side heater-box still available? and is it nice cond? how much$..thanks..johnny

12-03-2011, 11:28 PM	#90
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: 72 c20 getting parted now Payment Sent thanks __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

12-04-2011, 10:01 AM	#91
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 c20 getting parted now effects66, Its a 4 speed high hump, I will try to get it out today and get pics mightymouse, Johnny, I'll check it out haven't got truck torn down that far yet, been rainy and cold here Hubscrub, shipping out Mon, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-04-2011, 08:32 PM	#92
Horsman Registered User Join Date: Feb 2011 Location: North Texas Posts: 118	Re: 72 c20 getting parted now Sounds nutty, but would like to buy the two front rubber disc brake hoses. Hopefully I can use them either to match some new ones up or have them restored to reuse. Thanks in advance. __________________ Jeff Horsman 1972 C20 Highlander "C" 1966 Olds 442 L69 four speed 1971 Skylark (GS clone racecar) 494 stroker 1986 Buick T-Type

12-04-2011, 11:55 PM	#94
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 c20 getting parted now Horsman, sorry I sell all front end stuff complete Jays68yak, sounds good Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

12-05-2011, 03:13 PM	#95
Bert W Registered User Join Date: Dec 2008 Location: Jackson, MS Posts: 373	Re: 72 c20 getting parted now I need the alternator brackets, if not sold already. 2 PMs sent. __________________ 1968 Chevy C/10 LWB V8 1983 K5 Blazer 1989 C1500 Stepside Reg. Cab V8 Last edited by Bert W; 12-05-2011 at 03:23 PM.

12-07-2011, 09:16 AM	#96
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 c20 getting parted now Pics for David, 1st couple are the ones on my blazer, the last pic is the set I have Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-08-2011, 01:17 AM	#97
Bert W Registered User Join Date: Dec 2008 Location: Jackson, MS Posts: 373	Re: 72 c20 getting parted now Randy, money on it's way. Thanks! __________________ 1968 Chevy C/10 LWB V8 1983 K5 Blazer 1989 C1500 Stepside Reg. Cab V8

12-08-2011, 02:33 PM	#98
409impala1 Registered User Join Date: Dec 2005 Location: nebraska Posts: 136	Re: 72 c20 getting parted now how much for the tow hooks?

12-08-2011, 09:10 PM	#99
Pillow Registered User Join Date: Apr 2006 Location: Warrenton VA Posts: 144	Re: 72 c20 getting parted now I'm sending you a PM. Thanks! __________________ '71 C-10 with 5.3 LS2 cam & NWC T5 - Patina King! '83 Jeep Cherokee w 5.3 LS9 cam & SM465 NP208 swap in progress '92 Volvo 960 wagon w 5.3 LS7 cam & WC T5 swap in progress '79 Porsche 911 SC '48 Spartan Mansion 30' travel trailer '10 Porsche Cayenne S - Daily

12-10-2011, 01:05 PM	#100
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 c20 getting parted now Guys I'm out of commission till Tues, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.