Forever project "The Beast"

[ddubbs]

Luvin the color. Like the pic board for inspiration. Can't wait to see some update pics!!!!!!
Posted via Mobile Device

[YBNORML]

Originally Posted by ddubbs

Luvin the color. Like the pic board for inspiration. Can't wait to see some update pics!!!!!!
Posted via Mobile Device

Thanks, were you able to make yours out on the wall? The yellow that is on the cab is a little different from what I am planning on going with this time around. So far the plan is early 60's butternut yellow.

Today was slow in the shop, but never the less was a good day. I brought my bike home from storage. All the toys are now home Although it is still too early for serious riding/driving it is definately time to get them ready.

[smoknbarrels]

Nice bike! been thinking of ditching the dirt bike for a cruiser, as the knees can't take it much more. nice paint on that thing! going with a yellow theme for the toys?

[YBNORML]

Thanks, the paint is the factory Victory paintjob. Looks great in pics but the graphics are just decals underneath the clearcoat. I would like to repaint it but I just can't justify repainting it. Yellow has always been my favorite color

[chapster]

another forum member with a victory, sweet......I bought a new cross country last year and love it.

[fastcam1]

so looking at how you smoothed the driver side of your firewall, are you gonna run a e-brake?

[YBNORML]

Originally Posted by chapster

another forum member with a victory, sweet......I bought a new cross country last year and love it.

Totally the best bang for your buck! I don't get alot of time to ride it these days, two kids under five makes time a little hard to come by but I will never sell it.

Originally Posted by fastcam1

so looking at how you smoothed the driver side of your firewall, are you gonna run a e-brake?

I am still planning on running an e-brake, I figured it was easier to fill it all in now and re-cut the hole for the cable at a later date. Hopefully in a less obtrusive location.

[YBNORML]

Not alot of progress this weekend, but I did manage to layout for the porterbuilt hinges and get a little bit of mud on the firewall.

[fastcam1]

Originally Posted by YBNORML

Not alot of progress this weekend, but I did manage to layout for the porterbuilt hinges and get a little bit of mud on the firewall.

Some progress is alot better than none lol there's been plenty of times I didn't touch my truck for a couple of months but as of right now no distractions gotta buckle down and get it goin
Posted via Mobile Device

[YBNORML]

Decided to finish gutting my parts truck this weekend. It is/was a 68 GMC with a 6cyl/3OTT. The dash is uncut so I decided to remove the entire thing. Hopefully I managed to take off everything I need.

The driver side of the firewall was very close to the valve cover, less than a 1/4" between them. I first sliced the wall vertically and then horizontally about every 1" or so. Then I folded them in on eachother, I have also bent the piece to replace the area where the clutch rod used to come through. By doing it this way I was able to avoid cutting into the bracing that is in that area. Now I am just waiting on my friend to help me weld it up. I really need to learn how to weld!! When finished I am hoping that it will flow as smoothly as the passenger side does.

[Lolyin58]

Very nice build. Looking forward to seeing it this summer!

[PHAT TONY]

Welding's not hard to learn, just start doin it and watch and understand what the wire's doing and where it's going. A good helmet is worth gold!

[Mr Pops]

Originally Posted by YBNORML

Thanks, there sure are alot more Edmonton and area guys on here than I thought.

True dat.. Subscribed!

[YBNORML]

Originally Posted by Lolyin58

Very nice build. Looking forward to seeing it this summer!

Thanks, I like the truck in your avatar! Is it yours?

Originally Posted by PHAT TONY

Welding's not hard to learn, just start doin it and watch and understand what the wire's doing and where it's going. A good helmet is worth gold!

Thanks for the advice, right now I am just watching and paying close attention to what my friend is doing.

Originally Posted by Mr Pops

True dat.. Subscribed!

I was wondering when you were going to pop in

[smoknbarrels]

good to see some updates!

about that parts truck of yours... it the gas cap area salvagable?

[YBNORML]

Originally Posted by smoknbarrels

good to see some updates!

about that parts truck of yours... it the gas cap area salvagable?

I think it's decent, I can take some pics when I get home from work. What exactly are you after?
Posted via Mobile Device

[YBNORML]

Here you go, if you want I can cut it off and save it for you. Just let me know. Are you close enough that you could pick it up?

[smoknbarrels]

I am 40 mins out of town, sweet can you save me this part?



looks to be in perfect shape!, awesome!! my truck will thank you!

[YBNORML]

For sure, I'll cut it out tomorrow. I double checked your build thread and saw what happened, it'll be my pleasure to donate it to the repair.
Posted via Mobile Device

[YBNORML]

Got the firewall finished up, and set the cab back on the frame. Lot's of room now.

[reefer55]

Looks good whats the next step?
Posted via Mobile Device

[ddubbs]

Been awhile since I've got to catch up on your thread. Looks like everything is coming along great. I haven't had a spare minute to work on mine. But looking at yours is giving me inspiration to get back on it. Keep on truckin!!!!
Posted via Mobile Device

[Pife]

Any Progress?

[ChopperCity256]

yup sign me up on this one. awesome!

[YBNORML]

Sorry guys, ive been a little lax on my posts. Life has been extremely busy lately. The wife is now currently 40 weeks plus 5 days pregnant Which mean all kinds of stuff to do around the house. But I know how much everyone likes pic so here are a few. First a few of the family hanging in the shop with me. Mostly just cleaning up. And a few of the truck how she sits now.