Harpie's 71 SWB 5.3LS build - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 02-06-2013, 05:23 PM

Chassis looks great....i am nursing a 2 week old injury like that myself !

Harpie · 02-06-2013, 08:18 PM

Thanks guys its took me long enough lol but unless something happens ill have my motor and trans in place next week then I can start getting everything plumbed and etc...
Posted via Mobile Device

C10_ustacould · 02-06-2013, 09:49 PM

Looks fantastic! It sure it great to hit a milestone like this, just few more and you'll be riding!

Harpie · 02-20-2013, 04:52 PM

Well lil update the motor and trans are in place. Was pretty happy with how it went but gotta decide on what I wanna run for exhaust. Dunno if I wanna mess with headers or just run stock truck manifolds. Truck is just gonna be a fun lil driver nothing crazy so what y'all think? And I'm thinking of doing some wrinkle black valve cover with cheverolet and red Bowie on them who knows.

Posted via Mobile Device
Posted via Mobile Device

**68 Four on the Floor** · 02-20-2013, 07:32 PM

I found a set of LS1 Camaro headers on ebay for 100$. i have a set of manifolds but they hit the frame and the headers seem to clear just fine.

Harpie · 02-20-2013, 07:42 PM

Quote:

Originally Posted by 68 Four on the Floor

I found a set of LS1 Camaro headers on ebay for 100$. i have a set of manifolds but they hit the frame and the headers seem to clear just fine.

I sure hate to run headers unless I just have to. Wonder if a set if ls1 manifolds would work?
Posted via Mobile Device

**68 Four on the Floor** · 02-20-2013, 11:52 PM

Sorry I thought you were running a 5.3 lm7. must have missed a post somewhere in there

Harpie · 02-20-2013, 11:55 PM

I was originally but got a deal on a 5.7 that I couldn't pass up.
Posted via Mobile Device

**68 Four on the Floor** · 02-21-2013, 12:23 AM

Yea thats how i ended up with my LM7. If i had it my way id have manifolds but they wont clear the frame and i cant find any others in the yards locally.

Harpie · 04-29-2013, 06:14 PM

Well figured I would post something lol since it's been awhile I got the Boyd tank installed the engine and trans needed to be leveled up just a touch so made a spacer for the trans mount and now my slip yoke will clear the ECE crossmember. All I need to do now is get the fuel lines made up, the brake lines finished and a exhaust done and ill be ready for the cab to be go back on. So it's getting closer to lookin like a truck again.

Posted via Mobile Device
Posted via Mobile Device

502ms · 04-29-2013, 07:32 PM

Coming along nicely
Posted via Mobile Device

mcbassin · 04-29-2013, 10:58 PM

Hey nice progress. Keep the updates coming
Posted via Mobile Device

mcbassin · 07-01-2014, 04:49 PM

Been a long time since an update on this puppy???

Harpie · 07-01-2014, 04:59 PM

Hey thanks for checking on me lol it's moving slow lately just been so busy flying/work but I have been ordering lots of little stuff I'll need when finishing it out. Cab is on it's stand waiting for paint and body guy to say bring it on. The little crap seems to take the longest I'm defiantly ready for some big milestones. The frame is totally done all fuel brakes etc are buttoned up. I am waiting on exhaust until can is on frame.

Xeen · 07-01-2014, 06:37 PM

Nice build I'm doing a similar build myself.
If you still need to adapt your power steering I have already done the leg work and here are the results.
http://67-72chevytrucks.com/vboard/s...&postcount=697

Harpie · 07-01-2014, 07:02 PM

Quote:

Originally Posted by Xeen

Nice build I'm doing a similar build myself.
If you still need to adapt your power steering I have already done the leg work and here are the results.
http://67-72chevytrucks.com/vboard/s...&postcount=697

Sweet yes I have not done that yet and I have been putting it off lol

Harpie · 01-22-2015, 08:40 PM

Well I have not posted in forever so I had best get on it I guess lol. My wife said she is ready for me to get done and I got permission to dump some money into my project. Frame and drivetrain all done just needs body work and paint done so I can get it back together so off it goes to paint and body. Won't be long fellas!

Crash_OK · 01-22-2015, 08:47 PM

looking forward to seeing the progress

Harpie · 01-30-2015, 04:41 PM

Got the exhaust on today. Did not run the tail pipes yet can't decide if I want them out the back with tips or tucked up underneath where they can't be seen. So I'll wait until I get the bed and bumper installed. But if I had my computer and harness back from the shop building and programming it I could fire it up! So now just waiting on that and the body shop to call so I can go pick up the cab and stick it back on. Then they will final fit everything and get it painted.

mcbassin · 01-30-2015, 05:27 PM

Looking good Harpie! Dig the exhaust.

Harpie · 01-30-2015, 05:57 PM

Quote:

Originally Posted by mcbassin

Looking good Harpie! Dig the exhaust.

Thank you sir! But I'm like a fat kid looking in a cake shop window I am dieing to hear it but I just can't yet ugh lol.

Harpie · 02-16-2015, 08:26 PM

So truck has been in the body shop for almost a month I think I'm having separation anxiety lol.

mcbassin · 02-17-2015, 09:38 AM

Quote:

Originally Posted by Harpie

So truck has been in the body shop for almost a month I think I'm having separation anxiety lol.

I hope you don't get locked in paint prison.

Harpie · 02-17-2015, 10:49 AM

Quote:

Originally Posted by mcbassin

I hope you don't get locked in paint prison.

I hope not ugh.

gdavis · 02-17-2015, 02:47 PM

Quote:

Originally Posted by Harpie

I hope not ugh.

The transmission cooler. I guess the cooler don't need the lines to the radiator? I ran lines to the radiator, but just don't like the way they look. Will this cooler you are using be enough for a th400? I could change and make mine the same as yours. just thinking out loud. and another thing did you install a cross pipe to connect both exhaust pipes together. Someone said something about equalizing the back pressure of the engine. I am about to start with my exhaust, Trying to get all the information I can.

02-06-2013, 05:23 PM	#76
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Harpie's 71 SWB 5.3LS build Chassis looks great....i am nursing a 2 week old injury like that myself ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-06-2013, 08:18 PM	#77
Harpie Registered User Join Date: Jan 2012 Location: Durant OK Posts: 372	Re: Harpie's 71 SWB 5.3LS build Thanks guys its took me long enough lol but unless something happens ill have my motor and trans in place next week then I can start getting everything plumbed and etc... Posted via Mobile Device

02-06-2013, 09:49 PM	#78
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Harpie's 71 SWB 5.3LS build Looks fantastic! It sure it great to hit a milestone like this, just few more and you'll be riding! __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

02-20-2013, 04:52 PM	#79
Harpie Registered User Join Date: Jan 2012 Location: Durant OK Posts: 372	Re: Harpie's 71 SWB 5.3LS build Well lil update the motor and trans are in place. Was pretty happy with how it went but gotta decide on what I wanna run for exhaust. Dunno if I wanna mess with headers or just run stock truck manifolds. Truck is just gonna be a fun lil driver nothing crazy so what y'all think? And I'm thinking of doing some wrinkle black valve cover with cheverolet and red Bowie on them who knows. Posted via Mobile Device Posted via Mobile Device

02-20-2013, 07:32 PM	#80
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: Harpie's 71 SWB 5.3LS build I found a set of LS1 Camaro headers on ebay for 100$. i have a set of manifolds but they hit the frame and the headers seem to clear just fine.

02-20-2013, 11:52 PM	#82
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: Harpie's 71 SWB 5.3LS build Sorry I thought you were running a 5.3 lm7. must have missed a post somewhere in there

02-20-2013, 11:55 PM	#83
Harpie Registered User Join Date: Jan 2012 Location: Durant OK Posts: 372	Re: Harpie's 71 SWB 5.3LS build I was originally but got a deal on a 5.7 that I couldn't pass up. Posted via Mobile Device

02-21-2013, 12:23 AM	#84
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: Harpie's 71 SWB 5.3LS build Yea thats how i ended up with my LM7. If i had it my way id have manifolds but they wont clear the frame and i cant find any others in the yards locally.

04-29-2013, 06:14 PM	#85
Harpie Registered User Join Date: Jan 2012 Location: Durant OK Posts: 372	Re: Harpie's 71 SWB 5.3LS build Well figured I would post something lol since it's been awhile I got the Boyd tank installed the engine and trans needed to be leveled up just a touch so made a spacer for the trans mount and now my slip yoke will clear the ECE crossmember. All I need to do now is get the fuel lines made up, the brake lines finished and a exhaust done and ill be ready for the cab to be go back on. So it's getting closer to lookin like a truck again. Posted via Mobile Device Posted via Mobile Device

04-29-2013, 07:32 PM	#86
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: Harpie's 71 SWB 5.3LS build Coming along nicely Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

04-29-2013, 10:58 PM	#87
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Harpie's 71 SWB 5.3LS build Hey nice progress. Keep the updates coming Posted via Mobile Device __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-01-2014, 04:49 PM	#88
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Harpie's 71 SWB 5.3LS build Been a long time since an update on this puppy??? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-01-2014, 04:59 PM	#89
Harpie Registered User Join Date: Jan 2012 Location: Durant OK Posts: 372	Re: Harpie's 71 SWB 5.3LS build Hey thanks for checking on me lol it's moving slow lately just been so busy flying/work but I have been ordering lots of little stuff I'll need when finishing it out. Cab is on it's stand waiting for paint and body guy to say bring it on. The little crap seems to take the longest I'm defiantly ready for some big milestones. The frame is totally done all fuel brakes etc are buttoned up. I am waiting on exhaust until can is on frame.

07-01-2014, 06:37 PM	#90
Xeen Registered User Join Date: Aug 2012 Location: Topeka Kansas Posts: 2,655	Re: Harpie's 71 SWB 5.3LS build Nice build I'm doing a similar build myself. If you still need to adapt your power steering I have already done the leg work and here are the results. http://67-72chevytrucks.com/vboard/s...&postcount=697 __________________ Please call me Brian. Check out My 1972 SWB Fleetside 5.3L Vortec Restomod Build

01-22-2015, 08:40 PM	#92
Harpie Registered User Join Date: Jan 2012 Location: Durant OK Posts: 372	Re: Harpie's 71 SWB 5.3LS build Well I have not posted in forever so I had best get on it I guess lol. My wife said she is ready for me to get done and I got permission to dump some money into my project. Frame and drivetrain all done just needs body work and paint done so I can get it back together so off it goes to paint and body. Won't be long fellas!



Register or Log In To remove these advertisements.

01-22-2015, 08:47 PM	#93
Crash_OK Registered User Join Date: Nov 2011 Location: Edmond, OK. Posts: 1,362	Re: Harpie's 71 SWB 5.3LS build looking forward to seeing the progress __________________ Mark ----------------------- Crash's 69 4x4 SWB Crash's Roof over Lake Home Crash's 1988 Land Cruiser Build

01-30-2015, 04:41 PM	#94
Harpie Registered User Join Date: Jan 2012 Location: Durant OK Posts: 372	Re: Harpie's 71 SWB 5.3LS build Got the exhaust on today. Did not run the tail pipes yet can't decide if I want them out the back with tips or tucked up underneath where they can't be seen. So I'll wait until I get the bed and bumper installed. But if I had my computer and harness back from the shop building and programming it I could fire it up! So now just waiting on that and the body shop to call so I can go pick up the cab and stick it back on. Then they will final fit everything and get it painted.

01-30-2015, 05:27 PM	#95
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Harpie's 71 SWB 5.3LS build Looking good Harpie! Dig the exhaust. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

02-16-2015, 08:26 PM	#97
Harpie Registered User Join Date: Jan 2012 Location: Durant OK Posts: 372	Re: Harpie's 71 SWB 5.3LS build So truck has been in the body shop for almost a month I think I'm having separation anxiety lol.

Register or Log In To remove these advertisements.