CA '68 C10 long fleet ready to part. - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jwodahl · 07-18-2012, 09:35 AM

be much appreciated...

Littletony · 07-18-2012, 12:06 PM

Quote:

Originally Posted by mahanian

Hey Jerry,
Not trying to step on any toes but I got in line for the choke delete at $40 shipped so if you want to sell it for your asking price I'll still take it if the other guy in front of me passes. I think when a buyer starts negotiating price after saying they will take it at the asking price then it's the seller's call if they want to go to the next guy in line.

Did this sell?

Jerry Jones · 07-18-2012, 07:37 PM

Quote:

Originally Posted by shawno72

Hey Jerry do you have a short bed drive shaft for a th350 or at least the front section?
Posted via Mobile Device

I don't have any short beds, sorry.

Quote:

Originally Posted by Littletony

Did this sell?

Yup, it is gone, sorry.

Leroy-B1 · 07-19-2012, 10:57 PM

Jerry was wondering if you had anymore choke deletes turns out I will need one maybe two more...shouldn't have listened to the crying and bought that one anyway

Jerry Jones · 07-20-2012, 12:38 AM

Quote:

Originally Posted by Leroy-B1

Jerry was wondering if you had anymore choke deletes turns out I will need one maybe two more...shouldn't have listened to the crying and bought that one anyway

Sorry that it worked out for you the way that it did, I have no others at this time.

Jerry Jones · 08-11-2012, 05:45 PM

Anything else folks?

Razor454 · 08-11-2012, 05:58 PM

Do you have the driver and pass window glass? If so whats the condition? Thx
Posted via Mobile Device

Jerry Jones · 08-11-2012, 07:20 PM

Quote:

Originally Posted by Razor454

Do you have the driver and pass window glass? If so whats the condition? Thx
Posted via Mobile Device

I only have 1 drivers side (Soft Ray), and 1 Passenger side
(clear)... both are pretty decent with mild scratches.

**gmc 2500 4x4** · 08-11-2012, 07:59 PM

how are are the forward harnesses from firewall?

Jerry Jones · 08-11-2012, 08:01 PM

Quote:

Originally Posted by gmc 2500 4x4

how are are the forward harnesses from firewall?

Gone, sorry

Rdrdave · 08-11-2012, 08:27 PM

How.s the slop in the steering box? Is it all leaked out? Price as well. Thanks. Stay cool it.s toasty out there.
Posted via Mobile Device

Vova · 08-11-2012, 09:42 PM

How much for the under hood harness? Where in nor cal are you?
Posted via Mobile Device

Jerry Jones · 08-12-2012, 01:06 AM

Quote:

Originally Posted by Rdrdave

How.s the slop in the steering box? Is it all leaked out? Price as well. Thanks. Stay cool it.s toasty out there.
Posted via Mobile Device

I drove this truck for 20 years and it seemed fine, but I drove it for 20 years... so it could have been getting sloppy over the years and I not notice.

Yes it is scorching out there!!!

Quote:

Originally Posted by Vova

How much for the under hood harness? Where in nor cal are you?
Posted via Mobile Device

Harness is gone, I am in Antioch.

tdj4bama · 08-12-2012, 01:39 AM

front bumper gone?

Rdrdave · 08-12-2012, 05:03 PM

ok, thanks. I have the same issue. It feels fine but my definition of fine is someone elses "slop".

brownbag40 · 08-13-2012, 03:33 PM

How about the driver front fender and rear glass?

Chewievette · 08-14-2012, 01:16 PM

I'm interested in all of the clutch linkage and brackets from the pedal to the clutch to convert my automatic. I have pedals already, I think I can source a bellhousing locally.
zip: 37412

Jerry Jones · 08-15-2012, 10:23 PM

Quote:

Originally Posted by tdj4bama

front bumper gone?

I have 2, one extremely nice and a decent "driver" what are you looking for? I will get pics by this weekend.

Quote:

Originally Posted by brownbag40

How about the driver front fender and rear glass?

I think the fender is fair, I think it has some bondo, I will check by this weekend.

Quote:

Originally Posted by Chewievette

I'm interested in all of the clutch linkage and brackets from the pedal to the clutch to convert my automatic. I have pedals already, I think I can source a bellhousing locally.
zip: 37412

It is all there, I was driving it before it got parked for dismantle. I will try to pull it soon and price it.

A.Bursell · 08-15-2012, 11:27 PM

Is the license plate light connector on the body side intact? Would you consider hacking it off with some wire attached to sell?

Adam

tdj4bama · 08-16-2012, 12:53 AM

On the front bumper I would be interested in the "driver"

Blackcobrajay · 08-16-2012, 03:57 AM

Outer heater box,heater core and blower motor work with no leaks? Price shipped to 93906. Thanks
Posted via Mobile Device

Jerry Jones · 08-19-2012, 03:38 PM

Quote:

Originally Posted by A.Bursell

Is the license plate light connector on the body side intact? Would you consider hacking it off with some wire attached to sell?

Adam

I think it is there, I will hack away... what exactly do you need? just the connector and wire on both sides?

Quote:

Originally Posted by tdj4bama

On the front bumper I would be interested in the "driver"

I am soaking the bolts, they are being stubborn.

Quote:

Originally Posted by Blackcobrajay

Outer heater box,heater core and blower motor work with no leaks? Price shipped to 93906. Thanks
Posted via Mobile Device

The plastic box has a hole on the corner (easily patched), the rest was working when the truck was retired.

A.Bursell · 08-19-2012, 11:05 PM

Quote:

Originally Posted by Jerry Jones

I think it is there, I will hack away... what exactly do you need? just the connector and wire on both sides?

By luck, I just found one that will work at a local yard. Thanks anyway!

Adam

blue69 · 08-20-2012, 06:56 AM

Backup lenses?
Posted via Mobile Device

Jerry Jones · 08-20-2012, 11:10 PM

Quote:

Originally Posted by blue69

Backup lenses?
Posted via Mobile Device

I have a set, one is foggy and one is clear, I will ship the pair for $12

07-18-2012, 09:35 AM	#76
jwodahl Registered User Join Date: Jun 2012 Location: crosby, tx Posts: 114	Re: '68 C10 long fleet ready to part. be much appreciated...

07-19-2012, 10:57 PM	#79
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: '68 C10 long fleet ready to part. Jerry was wondering if you had anymore choke deletes turns out I will need one maybe two more...shouldn't have listened to the crying and bought that one anyway

08-11-2012, 05:45 PM	#81
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,407	Re: '68 C10 long fleet ready to part. Anything else folks? __________________ RIP El Jay! Love you brother!

08-11-2012, 05:58 PM	#82
Razor454 Registered User Join Date: Feb 2004 Location: Stokesdale, North Carolina Posts: 341	Re: '68 C10 long fleet ready to part. Do you have the driver and pass window glass? If so whats the condition? Thx Posted via Mobile Device __________________ 1967 SwB, 454 BB, 4L80E trans, 3.73 eaton posi 1997 C2500 Ext Cab 5.7 Liter 1955 3/4 ton 1st series w/ 235 straight six Sold it

08-11-2012, 07:59 PM	#84
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,972	Re: '68 C10 long fleet ready to part. how are are the forward harnesses from firewall?

08-11-2012, 08:27 PM	#86
Rdrdave Broke and still trying Join Date: Apr 2003 Location: Alameda, CA Posts: 562	Re: '68 C10 long fleet ready to part. How.s the slop in the steering box? Is it all leaked out? Price as well. Thanks. Stay cool it.s toasty out there. Posted via Mobile Device

08-11-2012, 09:42 PM	#87
Vova Registered User Join Date: Aug 2012 Location: Los gatos ca Posts: 1,299	Re: '68 C10 long fleet ready to part. How much for the under hood harness? Where in nor cal are you? Posted via Mobile Device

08-12-2012, 01:39 AM	#89
tdj4bama Registered User Join Date: Jul 2012 Location: Florence, AL Posts: 50	Re: '68 C10 long fleet ready to part. front bumper gone?

08-12-2012, 05:03 PM	#90
Rdrdave Broke and still trying Join Date: Apr 2003 Location: Alameda, CA Posts: 562	Re: '68 C10 long fleet ready to part. ok, thanks. I have the same issue. It feels fine but my definition of fine is someone elses "slop".

08-13-2012, 03:33 PM	#91
brownbag40 Registered User Join Date: Jun 2011 Location: Hughson Ca Posts: 85	Re: '68 C10 long fleet ready to part. How about the driver front fender and rear glass?

08-14-2012, 01:16 PM	#92
Chewievette Registered User Join Date: Mar 2011 Location: Chattanooga, TN Posts: 63	Re: '68 C10 long fleet ready to part. I'm interested in all of the clutch linkage and brackets from the pedal to the clutch to convert my automatic. I have pedals already, I think I can source a bellhousing locally. zip: 37412 __________________ 1968 C-10 Long Bed 307ci Automatic

08-15-2012, 11:27 PM	#94
A.Bursell Registered User Join Date: Jul 2012 Location: Marysville, WA Posts: 298	Re: '68 C10 long fleet ready to part. Is the license plate light connector on the body side intact? Would you consider hacking it off with some wire attached to sell? Adam

08-16-2012, 12:53 AM	#95
tdj4bama Registered User Join Date: Jul 2012 Location: Florence, AL Posts: 50	Re: '68 C10 long fleet ready to part. On the front bumper I would be interested in the "driver"

08-16-2012, 03:57 AM	#96
Blackcobrajay Registered User Join Date: Aug 2012 Location: Salinas Ca Posts: 6	Re: '68 C10 long fleet ready to part. Outer heater box,heater core and blower motor work with no leaks? Price shipped to 93906. Thanks Posted via Mobile Device

08-20-2012, 06:56 AM	#99
blue69 Registered User Join Date: Jul 2001 Location: ET Posts: 51	Re: '68 C10 long fleet ready to part. Backup lenses? Posted via Mobile Device __________________ 69 Custom 10, 350, 350, PS, PB GG Uncle bought new in 69 Fully restored in 92



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.