TX 72 Cheyenne super LWB for parts?

[zicc1835]

Originally Posted by WIDESIDE72

I am interested in the headliner tim if you get it off without breaking it. I am really looking for one piece only but will consider all of it if you get it off successfully. Even if you break some of it, let me know as I only need one piece as stated before.
Posted via Mobile Device

wideside im looking for less than all of the headliner trim also maybe we can work something out lmk if so

[hfd410]

payments received for

ac brackets/pulleys
valve covers
TBone 64's stuff
glove box door

Im starting pulling it apart today. Those requesting additional pics and info please be patient. I am a one man band today....Bryan

[mightymouse]

i'm also interested in the front clip , what cond. is the fenders and hood + core support. look,s pretty good in pics any issues with rust..jw

[Darren MagooGardner]

Originally Posted by zicc1835

wideside im looking for less than all of the headliner trim also maybe we can work something out lmk if so

I would like to know the trick of removing it without breaking the tabs. The truck I got the blue headliner from had nice trim till I started removing it. I have a few good pieces. Most have one ore more of the tabs broken. LMK if you cannot find what you need.

[jhiggy94]

Originally Posted by too much stuff

2wd and 4x4 are different cables...



Payment sent for glovebox door...

Ill have to pass. I have a 4X4. Thanks

[2002yanks]

edited, wrong post. sorry.

[hfd410]

Mightymouse Im tearing it down today. I will let you know but I think its pretty good. Dmagoo if I figure it out I will let you know.
Posted via Mobile Device

[hfd410]

Fenders and hood are sold
Those of you that have paid for parts, they should all ship this week

Also:
Hood hinges/springs $40
Nice SB shroud $60
7 blade fan/no clutch $40
Nice chrome frame vent windows with soft ray glass $120 pair
Front sport bumper brackets $40
Nice olive non tilt auto column $80
(Wheel is trash)
ALL ARE PLUS SHIPPING
Posted via Mobile Device

[hfd410]

Proof of progress...I met board member mightymouse today. He came over for a while, I enjoyed the visit...
Posted via Mobile Device

[hfd410]

Posted via Mobile Device

[hfd410]

This 350/TH350 is the original. Engine was running when parked in 1999 or 2000. It is full of oil and coolant. Turns freely. I will leave the intake and carb on it. Ram horns and accessory brackets have sold. I will palletize if someone can pickup or arrange shipping. $750 for the combo.
Posted via Mobile Device

[hfd410]

Valve covers are sold
Posted via Mobile Device

[TBONE1964]

Wow, is that an original un-cut fuel pump to carb steel line? You don't see many like that these days.

Are you willing to sell separate from the engine? How much? Pending if you can get it off without damaging the flare nuts. Is it too late to add it to my order?

I understand if you want to leave it with the engine.

Let me know.

Thank's
Tom

[hfd410]

Yes it is. I think I will leave it with the engine for now. I wish somebody would buy that little setup. Would be cool...
Posted via Mobile Device

[zicc1835]

Originally Posted by Darren MagooGardner

I would like to know the trick of removing it without breaking the tabs. The truck I got the blue headliner from had nice trim till I started removing it. I have a few good pieces. Most have one ore more of the tabs broken. LMK if you cannot find what you need.

i was able to get mine out with most tabs left in tact these trim pieces get brittle ill take a pic of what i need tomorrow and post WTB thread see if we can put a complete set together dont want to get anyones shorts in a knot hi jackin just sayin thanks for the offer ....and a bump for hfd410

[mightymouse]

Originally Posted by hfd410

Proof of progress...I met board member mightymouse today. He came over for a while, I enjoyed the visit...
Posted via Mobile Device

thank,s for the part,s Bryan lot,s of good part,s on that truck wish i had more $ and your blue + white truck sure is nice . thank,s and it was nice meeting you. keep on trucking

[TBONE1964]

Originally Posted by hfd410

Yes it is. I think I will leave it with the engine for now. I wish somebody would buy that little setup. Would be cool...
Posted via Mobile Device

No problem Bryan. I hope you sell it too. If I was closer, I would take it or even the whole truck. It is a lot of work parting out a whole truck or car. I hope you get everything you expect and more.

Thank you for everything.
Tom

[hfd410]

waiting on DeadheadNM to decide on bezel, heater control, and door strikers

mosesburb you are next on bezel, it is 40, whole guage cluster is 70 plus ride

pics are coming of seatbelts for olive1970, they are NICE...

[hfd410]

cigar lighter pic for olive1970

[DeadheadNM]

Originally Posted by hfd410

deadheadNM:will check defrost vents for $10pr, bezel $40, heater control$40,
door pillar strikers $20pr

Thanks for pics Bryan. I'll take the heater controls if the levers are solid and the threads where it attaches to the dash are in perfect shape (had a member sell me one with stripped, over sized threads). My WG bezel is in similar shape so will pass to next in line. I'd also take the bumper bolts if OEM and in decent shape - let me know when you can.

Otherwise PM payment details when poss: $40 + $15 shipping = $55

[hfd410]

MOSESBURB you are up on bezel/cluster...I would rather sell it as a cluster but would seperate the bezel as advertised. BW

[Olive1970]

Originally Posted by hfd410

waiting on DeadheadNM to decide on bezel, heater control, and door strikers

mosesburb you are next on bezel, it is 40, whole guage cluster is 70 plus ride

pics are coming of seatbelts for olive1970, they are NICE...

Sounds great, I sent you a reply to your PM also

[Zoomin]

If the chrome is nice on the vent windows, I'll take them.

[Darren MagooGardner]

Put me in line for the "pump to carb " line

[UP GRADE]

Going to pass on the ingition switch. Had a set in storage sorry for any inconvenience. Thanks up grade
Posted via Mobile Device