AZ parting 72 blazer - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

flyingcubby · 07-17-2013, 05:32 PM

Sent pm asking for payment info....Thanks Mike

Quote:

Originally Posted by oilyrag80

Yes i have front driveshft it is the stock shaft it has 3 joints I tried to post a pic
but having trouble. Hows 85 shipped
thanks james

swyfor5 · 07-18-2013, 03:36 PM

oily, I fixed my paypal mistake. Payment sent! Also sent ya a PM. Thank's!

clamcake · 07-18-2013, 09:10 PM

rocker boxes? Thanks

oilyrag80 · 07-18-2013, 09:11 PM

Quote:

Originally Posted by clamcake

rocker boxes? Thanks

there is nothing left of the rocker boxes completly rusted
James

FRENCHBLUE72 · 07-20-2013, 11:14 AM

do you have a passenger side Door Latch reinforcement plate..also gravel guards above rear bumper? 97527 is zip
Posted via Mobile Device

**D.PASSMORE** · 07-20-2013, 09:19 PM

How about those exhaust hangers? Any luck?

clamcake · 07-21-2013, 12:26 PM

I would like the C H E V R O L E T script on the tailgate and the K/5 Blazer script on fenders...Thanks.

oilyrag80 · 07-21-2013, 07:31 PM

Quote:

Originally Posted by FRENCHBLUE72

do you have a passenger side Door Latch reinforcement plate..also gravel guards above rear bumper? 97527 is zip
Posted via Mobile Device

sorry the latch plate was already missing and the gravel guards were rusted

Quote:

Originally Posted by D.PASSMORE

How about those exhaust hangers? Any luck?

only one I can find is driver side next to trans

Quote:

Originally Posted by clamcake

I would like the C H E V R O L E T script on the tailgate and the K/5 Blazer script on fenders...Thanks.

sorry already sold

oilyrag80 · 07-21-2013, 07:46 PM

here is what's left
front bumper brackets 40$ shipped
rear bumper brackets 30$ shipped
rear wheel patch panels 40$ shipped
blazer gas filler tube 45$ shipped
brake booster set up condition unknown $40 plus shipping
72 gas pedal ass 25$ shipped
dash patch 30$ shipped
hood hinges 30$ plus shipping
Thanks James

**D.PASSMORE** · 07-21-2013, 09:41 PM

Here is where the rear one is located -

oilyrag80 · 07-21-2013, 10:15 PM

Quote:

Originally Posted by D.PASSMORE

Here is where the rear one is located -

ok, I did not look there Ill check tomorrow

mtully79 · 07-22-2013, 10:53 AM

Do you have tracking info for the vent windows?

Thanks

flyingcubby · 07-22-2013, 04:22 PM

Oily,Just a quick question, Have you had the time to get the front drive line off yet? Thanks for your time ...Mike

oilyrag80 · 07-22-2013, 05:18 PM

Quote:

Originally Posted by mtully79

Do you have tracking info for the vent windows?

Thanks

Quote:

Originally Posted by flyingcubby

Oily,Just a quick question, Have you had the time to get the front drive line off yet? Thanks for your time ...Mike

Sorry I haven't pm'd you guys yet but both parts went out last friday
I'll send u tracking info when I get home tonight
Thanks james
Posted via Mobile Device

flyingcubby · 07-22-2013, 05:36 PM

Oily, Thanks for the update.......Mike

oilyrag80 · 07-22-2013, 09:40 PM

Quote:

Originally Posted by mtully79

Do you have tracking info for the vent windows?

Thanks

Quote:

Originally Posted by flyingcubby

Oily,Just a quick question, Have you had the time to get the front drive line off yet? Thanks for your time ...Mike

pm's sent

oilyrag80 · 07-22-2013, 09:41 PM

Quote:

Originally Posted by D.PASSMORE

Here is where the rear one is located -

yes I have that one as well
so its a total of 2 brackets
$25 shipped Thanks

mtully79 · 07-25-2013, 09:25 AM

Vent windows arrived yesterday, thanks!

69-72 · 07-25-2013, 02:04 PM

Are you planning on trashing the top? I need a patch piece.

oilyrag80 · 07-25-2013, 10:53 PM

Quote:

Originally Posted by mtully79

Vent windows arrived yesterday, thanks!

good im glad they made it ok thanks james

Quote:

Originally Posted by 69-72

Are you planning on trashing the top? I need a patch piece.

sorry already trashed

flyingcubby · 07-26-2013, 01:02 AM

Oily, do you still have the locking front hubs.....Thanks Mike

honess8290 · 07-31-2013, 11:26 AM

I would be interested in the cab and floor if their still connected. How much shipped to 32583..
Posted via Mobile Device

AHowe88 · 08-01-2013, 06:07 PM

Do you still have the front and rear bumper? If so can you let me know price shipped to 01770?

oilyrag80 · 08-02-2013, 06:43 PM

Quote:

Originally Posted by flyingcubby

Oily, do you still have the locking front hubs.....Thanks Mike

Yes I have them but I dont want to part out the front diff Ill let u know if somthing changes

Quote:

Originally Posted by honess8290

I would be interested in the cab and floor if their still connected. How much shipped to 32583..
Posted via Mobile Device

sorry it went to scrap it was'nt any good anyway

Quote:

Originally Posted by AHowe88

Do you still have the front and rear bumper? If so can you let me know price shipped to 01770?

sorry sold both bumpers

Roger carlin · 08-21-2013, 01:10 AM

How much For the top latches? Also need the door caps, Roger, at vegasking4181@yahoo.com 702 6104764
Posted via Mobile Device

07-18-2013, 03:36 PM	#77
swyfor5 Registered User Join Date: May 2007 Location: Marion, Mi. Posts: 2,429	Re: parting 72 blazer oily, I fixed my paypal mistake. Payment sent! Also sent ya a PM. Thank's!

07-18-2013, 09:10 PM	#78
clamcake Registered User Join Date: Jul 2013 Location: Easton, Ma Posts: 39	Re: parting 72 blazer rocker boxes? Thanks

07-20-2013, 11:14 AM	#80
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: parting 72 blazer do you have a passenger side Door Latch reinforcement plate..also gravel guards above rear bumper? 97527 is zip Posted via Mobile Device __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-20-2013, 09:19 PM	#81
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: parting 72 blazer How about those exhaust hangers? Any luck? __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

07-21-2013, 12:26 PM	#82
clamcake Registered User Join Date: Jul 2013 Location: Easton, Ma Posts: 39	Re: parting 72 blazer I would like the C H E V R O L E T script on the tailgate and the K/5 Blazer script on fenders...Thanks.

07-21-2013, 07:46 PM	#84
oilyrag80 Registered User Join Date: Jul 2006 Location: Tucson Az Posts: 1,695	Re: parting 72 blazer here is what's left front bumper brackets 40$ shipped rear bumper brackets 30$ shipped rear wheel patch panels 40$ shipped blazer gas filler tube 45$ shipped brake booster set up condition unknown $40 plus shipping 72 gas pedal ass 25$ shipped dash patch 30$ shipped hood hinges 30$ plus shipping Thanks James Attached Images

07-21-2013, 09:41 PM	#85
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: parting 72 blazer Here is where the rear one is located - Attached Images __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

07-22-2013, 10:53 AM	#87
mtully79 Registered User Join Date: Apr 2007 Location: Acworth, GA Posts: 441	Re: parting 72 blazer Do you have tracking info for the vent windows? Thanks

07-22-2013, 04:22 PM	#88
flyingcubby Registered User Join Date: Jul 2013 Location: Converse, Texas Posts: 103	Re: parting 72 blazer Oily,Just a quick question, Have you had the time to get the front drive line off yet? Thanks for your time ...Mike

07-22-2013, 05:36 PM	#90
flyingcubby Registered User Join Date: Jul 2013 Location: Converse, Texas Posts: 103	Re: parting 72 blazer Oily, Thanks for the update.......Mike

07-25-2013, 09:25 AM	#93
mtully79 Registered User Join Date: Apr 2007 Location: Acworth, GA Posts: 441	Re: parting 72 blazer Vent windows arrived yesterday, thanks!

07-25-2013, 02:04 PM	#94
69-72 Registered User Join Date: May 2008 Location: 204 Posts: 903	Re: parting 72 blazer Are you planning on trashing the top? I need a patch piece. __________________ 1969 Chevy Custom Camper 3/4 ton Rust free survivor 1972 Chevy Blazer CST 4x4 Almost Rust free survivor 1972 GMC Jimmy 2wd Undergoing surgery

07-26-2013, 01:02 AM	#96
flyingcubby Registered User Join Date: Jul 2013 Location: Converse, Texas Posts: 103	Re: parting 72 blazer Oily, do you still have the locking front hubs.....Thanks Mike

07-31-2013, 11:26 AM	#97
honess8290 Registered User Join Date: Feb 2013 Location: pensacola fl Posts: 16	Re: parting 72 blazer I would be interested in the cab and floor if their still connected. How much shipped to 32583.. Posted via Mobile Device

08-01-2013, 06:07 PM	#98
AHowe88 Registered User Join Date: Jul 2013 Location: Metrowest, MA Posts: 254	Re: parting 72 blazer Do you still have the front and rear bumper? If so can you let me know price shipped to 01770?



Register or Log In To remove these advertisements.

08-21-2013, 01:10 AM	#100
Roger carlin Registered User Join Date: Aug 2013 Location: Las Vegas, nevada Posts: 32	Re: parting 72 blazer How much For the top latches? Also need the door caps, Roger, at vegasking4181@yahoo.com 702 6104764 Posted via Mobile Device

Register or Log In To remove these advertisements.