MI Wire Harness pig tails and cuts - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CC69Rat** · 01-15-2016, 10:08 AM

I am looking for the wiring that goes up to the tail lights, rear side marker lights, reverse lights, and tag light. If I could find that whole piece that runs from the frame rail up controlling the rear panel I'd take the whole thing.. pig tails, sockets for the tail light housings etc.

68 CST truck. Not sure if a 68 had a tag light, but I could run the later stuff too, no worries, let me know what you may have... Thanks.

**DaHos** · 01-15-2016, 10:19 AM

Quote:

Originally Posted by CC69Rat

I am looking for the wiring that goes up to the tail lights, rear side marker lights, reverse lights, and tag light. If I could find that whole piece that runs from the frame rail up controlling the rear panel I'd take the whole thing.. pig tails, sockets for the tail light housings etc.

68 CST truck. Not sure if a 68 had a tag light, but I could run the later stuff too, no worries, let me know what you may have... Thanks.

Chad, I pulled one yesterday from a 71, It has been tapped for a trailer harness and will need some repair but it is complete. $20 shipped or trade even up for you truck?

Hunter67stepside · 01-15-2016, 04:02 PM

Payment sent

b.sharp · 01-15-2016, 08:54 PM

Do your you have a front harness for a 69 GMC? I need everything from the firewall plug out.

NoNeck · 01-16-2016, 09:29 AM

DaHos, we will take the complete wiring harness Chad and I asked you about. Chad, pay the man.

PayPal OK? If so, PM Chad your PayPal info.

Thank you sir!

POP

**DaHos** · 01-16-2016, 10:20 AM

Quote:

Originally Posted by Hunter67stepside

Payment sent

Ill get the dome lamp harness out on Monday

Quote:

Originally Posted by b.sharp

Do your you have a front harness for a 69 GMC? I need everything from the firewall plug out.

I do but the front and side marker lamp wires were cut off, the rest is very nice. Have the pigtails (included) $50 shipped, lmk if interested.

Quote:

Originally Posted by NoNeck

DaHos, we will take the complete wiring harness Chad and I asked you about. Chad, pay the man.

PayPal OK? If so, PM Chad your PayPal info.

Thank you sir!

POP

Did you get the reverse light housing issue resolved or do you need a pair also? PayPal is fine.....

NoNeck · 01-16-2016, 01:13 PM

Quote:

Did you get the reverse light housing issue resolved or do you need a pair also?

No, I used my Dremmal to shave small amounts off of the fiber disc but at the point the bulb twisted into the socket the disc broke into tiny little pieces. The problem is with the size of the repro fiber disc.

How much for the two backup light pigtails? Could you ship them with the harness?

Thanks for all your help. Chad will be with you on the payment soon.

POP

Hunter67stepside · 01-22-2016, 09:19 AM

Got my dome light wire. Thanks good deal! Here a bump for you

NoNeck · 01-22-2016, 02:03 PM

We got our tail light harness in the mail yesterday. It will work just fine. Thanks!

POP

b.sharp · 01-24-2016, 09:42 PM

wires were cut off, the rest is very nice. Have the pigtails (included) $50 shipped, lmk if interested.

I would prefer to have one that is complete. Thank you but Inwill keep looking.

SaltyC20 · 03-02-2016, 07:04 PM

Digging this up from the archives in the hopes of finding a Blower Motor Switch connector for an AC truck. Have one around?

**DaHos** · 03-02-2016, 10:16 PM

Quote:

Originally Posted by SaltyC20

Digging this up from the archives in the hopes of finding a Blower Motor Switch connector for an AC truck. Have one around?

Sorry I do not, they all seem to be melted.......

1968aj · 09-01-2016, 06:17 PM

do you have the plug in that goes from the intermediate rear harness that plugs into the taillight harness?

*ck5566* · 09-01-2016, 06:58 PM

Do you have ONLY a Under Dash Fuse Block with at least 6-8" of wire for splicing that Isn't Rusty for the Fuses? 68 C10 gauge truck, 3OTT, hazards on column, Non a/c, radio, heater, 2 spd wipers, cigar ltr, basic truck I guess?

**DaHos** · 09-02-2016, 08:21 AM

Quote:

Originally Posted by 1968aj

do you have the plug in that goes from the intermediate rear harness that plugs into the taillight harness?

Got one, $8 shipped

Quote:

Originally Posted by ck5566

Do you have ONLY a Under Dash Fuse Block with at least 6-8" of wire for splicing that Isn't Rusty for the Fuses? 68 C10 gauge truck, 3OTT, hazards on column, Non a/c, radio, heater, 2 spd wipers, cigar ltr, basic truck I guess?

Let me take a look for you......

*ck5566* · 09-09-2016, 06:51 PM

Quote:

Originally Posted by ck5566

Do you have ONLY a Under Dash Fuse Block with at least 6-8" of wire for splicing that Isn't Rusty for the Fuses? 68 C10 gauge truck, 3OTT, hazards on column, Non a/c, radio, heater, 2 spd wipers, cigar ltr, basic truck I guess?

Hay Rip Van Winkle are you there. LOL

You said you would take a look for it 8 days ago, hows it going?

kda2000 · 10-12-2016, 05:57 PM

Do you have any backup light connectors (the light side the connector), single wire that plugs into the rear wiring harness -- PO cut them off and blue clipped them together. I've replaced the rear wiring harness for other reasons, and would like to put the correct connector on the back up lights, just need the connector and a few inches of the wire -- thanks for your answer. (BTW - 68 stepside, but I think the fleet uses the same connector). Looking for 2 --- Ken

Tuff Gong · 04-21-2017, 03:30 PM

Any chance you have cuts from the wiper blade harnesses. I need both sides. I will try to post pictures.

Tuff Gong · 04-21-2017, 03:35 PM

This part plus it's partner

f.flujan · 04-24-2017, 06:09 PM

Front fender clearance light pigtail
Harness for cluster gauge http://67-72chevytrucks.com/vboard/a...1&d=1388784241
Heater lamp pigtail
Shipped to 92584
Thanks

01-15-2016, 10:08 AM	#1
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,206	Re: Wire Harness pig tails and cuts I am looking for the wiring that goes up to the tail lights, rear side marker lights, reverse lights, and tag light. If I could find that whole piece that runs from the frame rail up controlling the rear panel I'd take the whole thing.. pig tails, sockets for the tail light housings etc. 68 CST truck. Not sure if a 68 had a tag light, but I could run the later stuff too, no worries, let me know what you may have... Thanks. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

01-15-2016, 04:02 PM	#3
Hunter67stepside Registered User Join Date: Oct 2013 Location: Brentwood, Tn Posts: 315	Re: Wire Harness pig tails and cuts Payment sent

01-15-2016, 08:54 PM	#4
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: Wire Harness pig tails and cuts Do your you have a front harness for a 69 GMC? I need everything from the firewall plug out.

01-16-2016, 09:29 AM	#5
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,106	Re: Wire Harness pig tails and cuts DaHos, we will take the complete wiring harness Chad and I asked you about. Chad, pay the man. PayPal OK? If so, PM Chad your PayPal info. Thank you sir! POP __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

01-22-2016, 09:19 AM	#8
Hunter67stepside Registered User Join Date: Oct 2013 Location: Brentwood, Tn Posts: 315	Re: Wire Harness pig tails and cuts Got my dome light wire. Thanks good deal! Here a bump for you

01-22-2016, 02:03 PM	#9
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,106	Re: Wire Harness pig tails and cuts We got our tail light harness in the mail yesterday. It will work just fine. Thanks! POP __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.

01-24-2016, 09:42 PM	#10
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: Wire Harness pig tails and cuts wires were cut off, the rest is very nice. Have the pigtails (included) $50 shipped, lmk if interested. I would prefer to have one that is complete. Thank you but Inwill keep looking.

03-02-2016, 07:04 PM	#11
SaltyC20 Registered User Join Date: Nov 2014 Location: Chandler, Arizona Posts: 47	Re: Wire Harness pig tails and cuts Digging this up from the archives in the hopes of finding a Blower Motor Switch connector for an AC truck. Have one around? __________________ 1968 Chevy C20

09-01-2016, 06:17 PM	#13
1968aj Registered User Join Date: Apr 2009 Location: houston texas Posts: 1,438	Re: Wire Harness pig tails and cuts do you have the plug in that goes from the intermediate rear harness that plugs into the taillight harness?

09-01-2016, 06:58 PM	#14
ck5566 Account Suspended Join Date: Apr 2016 Location: Rancho Mirage, Ca. Posts: 875	Re: Wire Harness pig tails and cuts Do you have ONLY a Under Dash Fuse Block with at least 6-8" of wire for splicing that Isn't Rusty for the Fuses? 68 C10 gauge truck, 3OTT, hazards on column, Non a/c, radio, heater, 2 spd wipers, cigar ltr, basic truck I guess?

10-12-2016, 05:57 PM	#17
kda2000 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 170	Re: Wire Harness pig tails and cuts Do you have any backup light connectors (the light side the connector), single wire that plugs into the rear wiring harness -- PO cut them off and blue clipped them together. I've replaced the rear wiring harness for other reasons, and would like to put the correct connector on the back up lights, just need the connector and a few inches of the wire -- thanks for your answer. (BTW - 68 stepside, but I think the fleet uses the same connector). Looking for 2 --- Ken

04-21-2017, 03:30 PM	#18
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: Wire Harness pig tails and cuts Any chance you have cuts from the wiper blade harnesses. I need both sides. I will try to post pictures.

04-21-2017, 03:35 PM	#19
Tuff Gong Registered User Join Date: Jan 2011 Location: Glendale, AZ Posts: 3,178	Re: Wire Harness pig tails and cuts This part plus it's partner Attached Images

04-24-2017, 06:09 PM	#20
f.flujan Registered User Join Date: Dec 2016 Location: Menifee,ca Posts: 65	Re: Wire Harness pig tails and cuts Front fender clearance light pigtail Harness for cluster gauge http://67-72chevytrucks.com/vboard/a...1&d=1388784241 Heater lamp pigtail Shipped to 92584 Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.