KS 72 chevy longhorn, pretty clean old truck getting parted - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ls1nova71 · 01-04-2014, 10:20 PM

Hey Randy, I'm going to pass on the tailgate. The dents a little bigger than I was expecting, totally couldn't see it in the first pics.

Thanks anyway!

ralphie628 · 01-04-2014, 10:25 PM

Ralphie628, are you needing upper or lower, $8 each
.

i am sorry. i didnt said. i am looking for driver hood hinge.

teeitup · 01-04-2014, 10:27 PM

Eric, no problem

Ralphie628, $15 and I can ship it with the gauge setup

Thanks Randy

*low&slow* · 01-04-2014, 10:37 PM

Do you still have the wheel tubs out of the bed? If so, what's the condition on them?

Also would like price on them and cost of shipping to 83634

teeitup · 01-04-2014, 10:40 PM

I've got one guy ahead of you on them. I need to get them off and check condition, that will probably be Mon or Tues

*low&slow* · 01-04-2014, 10:52 PM

Quote:

Originally Posted by teeitup

I've got one guy ahead of you on them. I need to get them off and check condition, that will probably be Mon or Tues

Alright thanks. Let me know if he buys.

ralphie628 · 01-04-2014, 10:52 PM

Quote:

Originally Posted by teeitup

Eric, no problem

Ralphie628, $15 and I can ship it with the gauge setup

Thanks Randy

would you check just shipping the cluster and knobs? then check the shipping with the hinge. please and thanks

**29od1** · 01-04-2014, 11:00 PM

Randy, I'll pass the armrests to kcsa75.
Can you post the spot on the grill that needs work?
Thanks
David

rich67 · 01-04-2014, 11:09 PM

randy ill take that glove box along with vent pull linkage(passenger) when you get time.

BMERDOC · 01-04-2014, 11:12 PM

how much for the dash pad shipped to 23229?

teeitup · 01-04-2014, 11:12 PM

low&slow, sure will

ralphie628, I can do that

David, I got it off, I will get some pics in morning and post them

Rich, you wanting the door or liner?

Thanks Randy

teeitup · 01-04-2014, 11:13 PM

bmerdoc, $40 plus shipping, I'll try to get quote Sun but it may be Mon. Thanks Randy

Trucolur · 01-05-2014, 12:08 AM

Quote:

Originally Posted by teeitup

75555555555

I'm interested in the power steering set up !! Gear box pump and brackets!! How much and what shape is it in ???

Trucolur · 01-05-2014, 12:12 AM

Quote:

Originally Posted by Trucolur

I'm interested in the power steering set up !! Gear box pump and brackets!! How much and what shape is it in ???

Power steering my zip is 38053!!! I was wanting the whole set up gear box pump brackets !! Wanted to give u my zip code !! Sorry

**chewysask** · 01-05-2014, 03:04 AM

I will take the passenger door regulator if REED 72 passes.How much do you want for the pair of the ferrules and screws for the door?

kda2000 · 01-05-2014, 04:22 AM

Randy,

Can you check and see if this truck has the HD carrier bearing mounting bracket used on some C20s -- like the one in the first picture in this thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=584787

If it does, what price to 78737? - No hurry, pull it when you get easy access, after bed is all removed.

Thanks, Ken

REEDS 72 · 01-05-2014, 07:20 AM

All take the pass side window reg, are the door handle relays good? spring not broken and checking the cond of the tail light harness thanks.shipping will be 84003

Hard_Rain420 · 01-05-2014, 11:00 AM

I'll take the exterior handles.... they look better than the ones on my truck and all my extras. Same goes with wheel tubs. They already look better than the ones I have.

Please send me your PayPal addy and funds will be sent as a gift.

Thanks!

Rich

jeb1867 · 01-05-2014, 11:12 AM

Thanks for the pics Randy, I am going to pass on the belts and visors.
Sorry,
-Jake

RaceAGMC · 01-05-2014, 12:41 PM

I'm interested in the grille insert, grille supports, left, right and center along with the hood latch. My zip is 28216.

9teen69 · 01-05-2014, 01:13 PM

Randy - I'll take the jack and exhaust bracket. I don't need wrench if not stock...I have one.(save on weight)
Waiting on pics of heat shield...want to make sure better than the one I got.
thanks
Brant

kcsa75 · 01-05-2014, 02:00 PM

Quote:

Originally Posted by teeitup

kcsa75, Willie, arm rests may be sold already. Door panels are $60 plus shipping, or you can pay for them and I can hold them. They are in good shape no cracks. I have no idea on headlight switch

Thanks Randy

Randy, I think you made a mistake. You told me $60 for those $30 door panels. :-)

Seriously, since they don't have the scroll work, I was thinking considerably less. How about $40 with the arm rests?

teeitup · 01-05-2014, 03:04 PM

Trucolur, It all appears to be in good shape. For pump/brackets/pulley and PS box $80 plus shipping

chewysask, He wants this reg, I have another one out there. $15 for the door screws and ferrules

kda2000, I'll crawl under there later today and look

Reeds72, pass reg is yours. Door regs are good, one is almost brand new, $20 for the pair.. I'll try to look at rear harness later today

Hard_Rain420, Rich, door handles are yours. Your first in line on tubs. I'll get them off and pic this week, then we can settle up

jeb1867, no problem

RaceAGMC, grill insert is broke. I have the outer brackets off another truck in shed. Those and center support and hood latch $35 plus shipping

9teen69, Brant, pics coming of heat shield. It has one small burnt through spot, its not soft around the hole at all. Its on the backside where no one can see it

Willie, I better pass on on offer, they are black with no holes or cracks. If they were any other color I'd say yes but as you know black sells better

Thanks Randy

teeitup · 01-05-2014, 03:09 PM

ontrak12, Bill the visors are yours $40 plus shipping. I'll get quote Mon hopefully. Thanks Randy

Dirt's72 · 01-05-2014, 03:09 PM

I'll take the window cranks Randy, Thanks.

01-04-2014, 10:20 PM	#76
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: 72 chevy longhorn, pretty clean old truck getting parted Hey Randy, I'm going to pass on the tailgate. The dents a little bigger than I was expecting, totally couldn't see it in the first pics. Thanks anyway! __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

01-04-2014, 10:25 PM	#77
ralphie628 Registered User Join Date: Dec 2009 Location: Chatsworth CA Posts: 243	Re: 72 chevy longhorn, pretty clean old truck getting parted Ralphie628, are you needing upper or lower, $8 each . i am sorry. i didnt said. i am looking for driver hood hinge.

01-04-2014, 10:27 PM	#78
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 chevy longhorn, pretty clean old truck getting parted Eric, no problem Ralphie628, $15 and I can ship it with the gauge setup Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-04-2014, 10:37 PM	#79
low&slow Account Suspended Join Date: Jan 2009 Location: Kuna, Idaho Posts: 1,046	Re: 72 chevy longhorn, pretty clean old truck getting parted Do you still have the wheel tubs out of the bed? If so, what's the condition on them? Also would like price on them and cost of shipping to 83634

01-04-2014, 10:40 PM	#80
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 chevy longhorn, pretty clean old truck getting parted I've got one guy ahead of you on them. I need to get them off and check condition, that will probably be Mon or Tues __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-04-2014, 11:00 PM	#83
29od1 Registered User Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: 72 chevy longhorn, pretty clean old truck getting parted Randy, I'll pass the armrests to kcsa75. Can you post the spot on the grill that needs work? Thanks David

01-04-2014, 11:09 PM	#84
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: 72 chevy longhorn, pretty clean old truck getting parted randy ill take that glove box along with vent pull linkage(passenger) when you get time.

01-04-2014, 11:12 PM	#85
BMERDOC Registered User Join Date: Jun 2011 Location: Richmond,Va Posts: 2,934	Re: 72 chevy longhorn, pretty clean old truck getting parted how much for the dash pad shipped to 23229? __________________ Nick Carter 1967 C10 Short bed Fleetside Project Cheap Thrills! 2WD C10 Modern/Performance Alignments Easiest Alignment Ever!

01-04-2014, 11:13 PM	#87
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 chevy longhorn, pretty clean old truck getting parted bmerdoc, $40 plus shipping, I'll try to get quote Sun but it may be Mon. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-05-2014, 03:04 AM	#90
chewysask Active Member Join Date: Apr 2013 Location: Saskatoon, Sask Posts: 193	Re: 72 chevy longhorn, pretty clean old truck getting parted I will take the passenger door regulator if REED 72 passes.How much do you want for the pair of the ferrules and screws for the door?

01-05-2014, 04:22 AM	#91
kda2000 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 170	Re: 72 chevy longhorn, pretty clean old truck getting parted Randy, Can you check and see if this truck has the HD carrier bearing mounting bracket used on some C20s -- like the one in the first picture in this thread: http://67-72chevytrucks.com/vboard/s...d.php?t=584787 If it does, what price to 78737? - No hurry, pull it when you get easy access, after bed is all removed. Thanks, Ken

01-05-2014, 07:20 AM	#92
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: 72 chevy longhorn, pretty clean old truck getting parted All take the pass side window reg, are the door handle relays good? spring not broken and checking the cond of the tail light harness thanks.shipping will be 84003

01-05-2014, 11:00 AM	#93
Hard_Rain420 Registered User Join Date: Oct 2012 Location: Melbourne FL Posts: 201	Re: 72 chevy longhorn, pretty clean old truck getting parted I'll take the exterior handles.... they look better than the ones on my truck and all my extras. Same goes with wheel tubs. They already look better than the ones I have. Please send me your PayPal addy and funds will be sent as a gift. Thanks! Rich

01-05-2014, 11:12 AM	#94
jeb1867 Registered User Join Date: Jan 2013 Location: Wichita Posts: 32	Re: 72 chevy longhorn, pretty clean old truck getting parted Thanks for the pics Randy, I am going to pass on the belts and visors. Sorry, -Jake

01-05-2014, 12:41 PM	#95
RaceAGMC Registered User Join Date: Jul 2007 Location: Charlotte, NC Posts: 350	Re: 72 chevy longhorn, pretty clean old truck getting parted I'm interested in the grille insert, grille supports, left, right and center along with the hood latch. My zip is 28216. __________________ 70 CST, 6.0/ 4L80E in the works. Custom harness by 68 Short Step



Register or Log In To remove these advertisements.

01-05-2014, 01:13 PM	#96
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: 72 chevy longhorn, pretty clean old truck getting parted Randy - I'll take the jack and exhaust bracket. I don't need wrench if not stock...I have one.(save on weight) Waiting on pics of heat shield...want to make sure better than the one I got. thanks Brant __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

01-05-2014, 03:04 PM	#98
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 chevy longhorn, pretty clean old truck getting parted Trucolur, It all appears to be in good shape. For pump/brackets/pulley and PS box $80 plus shipping chewysask, He wants this reg, I have another one out there. $15 for the door screws and ferrules kda2000, I'll crawl under there later today and look Reeds72, pass reg is yours. Door regs are good, one is almost brand new, $20 for the pair.. I'll try to look at rear harness later today Hard_Rain420, Rich, door handles are yours. Your first in line on tubs. I'll get them off and pic this week, then we can settle up jeb1867, no problem RaceAGMC, grill insert is broke. I have the outer brackets off another truck in shed. Those and center support and hood latch $35 plus shipping 9teen69, Brant, pics coming of heat shield. It has one small burnt through spot, its not soft around the hole at all. Its on the backside where no one can see it Willie, I better pass on on offer, they are black with no holes or cracks. If they were any other color I'd say yes but as you know black sells better Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-05-2014, 03:09 PM	#99
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 chevy longhorn, pretty clean old truck getting parted ontrak12, Bill the visors are yours $40 plus shipping. I'll get quote Mon hopefully. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-05-2014, 03:09 PM	#100
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: 72 chevy longhorn, pretty clean old truck getting parted I'll take the window cranks Randy, Thanks.

Register or Log In To remove these advertisements.