DBW pedal mounting bracket

[Rich84]

It's an LQ4 with Fbody oil pan and exhaust manifolds. So I guess it's a Camaro trapped in a box truck.LOL

[Hart_Rod]

Originally Posted by Rich84

This is the pedal I have..
Attachment 1419028

Attachment 1419029

Attachment 1419030
Sorry about the picture quality..Little too much wine last night.

Lol, It looks like the flat bracket might work for you. You will probably have to redrill some holes though.

[StingRay]

Do you have any left for the truck style pedal? I'd like one. Can you ship to Canada?

[Hart_Rod]

Originally Posted by StingRay

Do you have any left for the truck style pedal? I'd like one. Can you ship to Canada?

Are you talking about the bent bracket for the 03-07 truck pedal?

This one: http://67-72chevytrucks.com/vboard/s...d.php?t=651123

If so, I do have some left. What is required to ship it to Canada?

[StingRay]

Yes the bent one. I like my stuff sent USPS. You will likely have to fill out a declaration of value, what the part is and where it was made. Should be about it. I'm happy to pay some extra handling for your trouble.

[Hart_Rod]

Originally Posted by StingRay

Yes the bent one. I like my stuff sent USPS. You will likely have to fill out a declaration of value, what the part is and where it was made. Should be about it. I'm happy to pay some extra handling for your trouble.

PM me your address and I'll talk to the post office.

[Hart_Rod]

Originally Posted by StingRay

Yes the bent one. I like my stuff sent USPS. You will likely have to fill out a declaration of value, what the part is and where it was made. Should be about it. I'm happy to pay some extra handling for your trouble.

Thanks for the purchase! Only 10 Left!

[StingRay]

Got it yesterday. It looks great. Thanks a bunch

[Blazn C5]

Are these still available ? I would like to package one with the hood brackets if you do.

Thanks, Anthony

[Hart_Rod]

Originally Posted by Blazn C5

Are these still available ? I would like to package one with the hood brackets if you do.

Thanks, Anthony

Yes I Do! Text me.

[hozeman469]

Need one for a 05 truck pedal if you have one available.

[Hart_Rod]

Originally Posted by hozeman469

Need one for a 05 truck pedal if you have one available.

Yes sir! PM sent and here's a link to that thread: http://67-72chevytrucks.com/vboard/s...d.php?t=651123

[hozeman469]

Ok,Thanks

[copywritten]

Intestred in a bracket for my 86. I have a pedal from an 05 Cadillac Escalade EXT.

[Hart_Rod]

Originally Posted by copywritten

Intestred in a bracket for my 86. I have a pedal from an 05 Cadillac Escalade EXT.

I don't make a bracket specifically for the 73-87, but some guys have modified my 67-72 bracket to work on the 73-87. LMK

[Hart_Rod]

For all of the guys looking for a pedal bracket to work with the 73-87 trucks, here's a thread that has some great info in it:

http://67-72chevytrucks.com/vboard/s...d.php?t=692222
http://www.hotrodlane.cc/Streetstories/81%20swap.pdf

Apparently a factory OEM gas pedal from a 94-02 CHEVY GMC 6.5L V8 DIESEL (PN 15984422) will bolt right in. You have to repin a few wires, but it's supposed to be pretty straight forward.

The .pdf file has a complete discussion on the entire install, but here is a small snippet:

"This is the installed Pedal Position Sensor AKA Drive by Wire pedal.
I used one from a 1998 6.5 Diesel truck as it bolts right up and is a closer match
than the later Silverado pedal. A couple of the wires do have to be moved as it is
internally wired different. Basically, there are three different sensors in the pedal
and the PCM compares all three of these to determine how much throttle
opening the drivers is requiring. If these three sensors do not agree, a code will
be set and the PCM takes a best guess at what the throttle opening should be.
The gray wire was moved from location A to J, the Brown wire was moved from
location E to A and the Yellow wire was moved from location J to E. I also had to
add a slot in the connector plug so it would plug into the pedal."

PLEASE NOTE I HAVEN'T TRIED THIS ON A TRUCK, I'M JUST PASSING THE INFORMATION. DO YOUR HOMEWORK BEFORE YOU PURCHASE ANY PARTS!!!!

Good luck with your LS Swap!!!

[Rust_phoenix]

Rob, i would like one of your corvette pedal brackets, i have sent a Paypal payment to the email listed on page 1
Paypal: robhartley@aol.com, enter "CPB" in message block.
Thank you!

[Hart_Rod]

Originally Posted by Rust_phoenix

Rob, i would like one of your corvette pedal brackets, i have sent a Paypal payment to the email listed on page 1
Paypal: robhartley@aol.com, enter "CPB" in message block.
Thank you!

It should ship today. Thanks!

[Rust_phoenix]

Rob, I received my bracket today, excellent service, Thank You!

[shenk10]

Rob, just sent a Paypal payment for a Gen IV pedal bracket for a 72. Thank you.

[Hart_Rod]

Originally Posted by Rust_phoenix

Rob, I received my bracket today, excellent service, Thank You!

Glad you like it! Thanks again.

Originally Posted by shenk10

Rob, just sent a Paypal payment for a Gen IV pedal bracket for a 72. Thank you.

Your bracket shipped today via the USPS. Thanks!

Rob

[Hart_Rod]

bump

[shenk10]

Just wanted to say that interestingly enough I too had the same problem as "derotoreut" with my holes not lining up and my blazer is a '72 purchased in Texas. It wasn't a problem for me, I just lined up the bottom hole, drilled 2 new holes and welded up the old ones. I wonder if it would be location, mine was made in April of 72 in Flint.

[brian1971]

Hi Rob,
I need one of the Corvette pedal brackets,I'm going to send you the payment in a few minutes.
Thanks Brian

[Hart_Rod]

Originally Posted by brian1971

Hi Rob,
I need one of the Corvette pedal brackets,I'm going to send you the payment in a few minutes.
Thanks Brian

Got it Brian, thanks! It will be in the mail Tuesday. Let me know if you have any questions. Merry Christmas!