CA 1970 Suburban Part out

[chewiebarker]

Originally Posted by budnikguy

Shipped, Greyhound with insurance $185. LMK

Can you get any shots of the brackets underneath where the hinges would bolt into? I want to make sure they are solid, as that is the reason I need to replace mine. I need it to be rot free as possible.

Also, for 185 would you consider including include the hinges? I am not sure mine will survive trying to detach them from the rotted brackets.

Thanks

[BB72CHEVKT]

I had to replace my radiator and tht took my truck funds so I am going to pass on the seat for now. If you still have it in a few weeks I will get with you.

[budnikguy]

You mean the heat riser? The seatbelts are not original to the suburban....lmk

Originally Posted by WhiteWhale

Interested in the adapter between carb and air cleaner and seat belts for the rear seat.

shipping to 91342


Thanks

[budnikguy]

I can do that, or i have another one that has been cut in one corner and i could cut it down smaller and ship for less cost possibly...if you just need the hinge mounting area..I will post pics later today or tomorrow.

Originally Posted by chewiebarker

Can you get any shots of the brackets underneath where the hinges would bolt into? I want to make sure they are solid, as that is the reason I need to replace mine. I need it to be rot free as possible.

Also, for 185 would you consider including include the hinges? I am not sure mine will survive trying to detach them from the rotted brackets.

Thanks

[6772king]

U figure anything on price for the wheel wells and filler patch??

[waylonbud]

Originally Posted by waylonbud

Hello,
I was wondering if you missed my post requesting rear seat hold down brackets and hardware and also the tailgate latch mechanism and button shipped to 37303.
Thank you.

Any thoughts or prices on these items yet?
Thanks.

[JimH2828]

Did you get a chance to make any progress on the below lists?

Originally Posted by JimH2828

Thanks for pulling the parts and posting the pics. List below, depends on price shipped to 30005.

1) Interested in the carb stud....wing nut is not original so not really interested, but whatever.
2) Interested in the gas accelerator assembly and hardware.
3) Interested in the ash tray
4) Interested in a set of rear hatch struts, does the non-painted set slide, lock and release well?
5) Interested in the brake line brass T fitting but it's not the one I was thinking. Pic attached on the one I meant......maybe it's not there.....under alternator on inside of frame rail.
6) Don't need the air cleaner housing, I would take the rubber seal and "AC" valve.

Open Items:
7) wiper fluid cowl nozzles
8) fuel pump to carb hard gas line with large carb nut
9) firewall grommets
10) I'm trying to think of other stuff...


Thanks
Jim

[budnikguy]

Here are pics of the wheel wells, the gas filler patch I would cut after you commit to it!

Originally Posted by 6772king

U figure anything on price for the wheel wells and filler patch??

[budnikguy]

Sorry got tied up with the seat sale and did not know if he needed the mounts with it. I will get these things together for you asap

Originally Posted by waylonbud

Any thoughts or prices on these items yet?
Thanks.

[budnikguy]

pics of both I have...

Originally Posted by chewiebarker

Can you get any shots of the brackets underneath where the hinges would bolt into? I want to make sure they are solid, as that is the reason I need to replace mine. I need it to be rot free as possible.

Also, for 185 would you consider including include the hinges? I am not sure mine will survive trying to detach them from the rotted brackets.

Thanks

[MikeCar]

I'm interested in the chrome tailgate button bezel and gasket as pictured in the photo below. Are they in good shape and how much shipped to 95747?

[chewiebarker]

Thanks for posting the pics and trying to work out a cheaper deal with the cut one.

If you can do the full length blue one, but include some hinges, for $185 I will do it.

Originally Posted by budnikguy

pics of both I have...

[JimH2828]

Budnikguy, seems like you have been away for a while......wanted to check in on the items you posted pics for me.

Thanks
Jim

Originally Posted by JimH2828

Did you get a chance to make any progress on the below lists?

Originally Posted by JimH2828 View Post
Thanks for pulling the parts and posting the pics. List below, depends on price shipped to 30005.

1) Interested in the carb stud....wing nut is not original so not really interested, but whatever.
2) Interested in the gas accelerator assembly and hardware.
3) Interested in the ash tray
4) Interested in a set of rear hatch struts, does the non-painted set slide, lock and release well?
5) Interested in the brake line brass T fitting but it's not the one I was thinking. Pic attached on the one I meant......maybe it's not there.....under alternator on inside of frame rail.
6) Don't need the air cleaner housing, I would take the rubber seal and "AC" valve.

Open Items:
7) wiper fluid cowl nozzles
8) fuel pump to carb hard gas line with large carb nut
9) firewall grommets
10) I'm trying to think of other stuff...


Thanks
Jim

[6772king]

That one looks like it has rust in between where the two halves come together...or maybe its just the pic...I'd like a pretty solid set ..let me know what you think

[chewiebarker]

Budnikguy,

Any decision on whether you will do the full tail pan with hinges shipped for 185?

Thanks

Marc

[Neverenuffbass]

How much for the gauge cluster shipped to 06830?

[6erWebb]

Im interested in the rear hatch if you still have it (dont need the glass).

I read through the posts to see if it was claimed and saw no sign of it..

Thanks! -Webb

[budnikguy]

I will be back at this suburban tomorrow as I had a large tree fall right next to it and could not get to it...

[budnikguy]

Are you looking for a nice one? Or something average, as the one in this burb is an average piece....$45 shipped on it.

Originally Posted by Neverenuffbass

How much for the gauge cluster shipped to 06830?

[budnikguy]

It is removed and glass removed, do you have a Greyhound station near by that I can ship to?? LMK

Originally Posted by 6erWebb

Im interested in the rear hatch if you still have it (dont need the glass).

I read through the posts to see if it was claimed and saw no sign of it..

Thanks! -Webb

[budnikguy]

I am picking up some cardboard and packing materials this week..and will be able to ship next week for you. $185 shipped Greyhound with the hinges!

Originally Posted by chewiebarker

Budnikguy,

Any decision on whether you will do the full tail pan with hinges shipped for 185?

Thanks

Marc

[budnikguy]

They are still on the gate, it is rare for the gasket to still be in one piece if there at all....I will pull it and see if the gasket is still complete

Originally Posted by MikeCar

I'm interested in the chrome tailgate button bezel and gasket as pictured in the photo below. Are they in good shape and how much shipped to 95747?

[6erWebb]

Originally Posted by budnikguy

It is removed and glass removed, do you have a Greyhound station near by that I can ship to?? LMK

Sure is Nashville is my closest one. I forgot to ask if it comes with the handle..

I can pm you my email if that would be better.

-Webb

[budnikguy]

I can include the handle and the mounting bolts for it. $200 delivered Greyhound. Feel free to pm me Here, e-mail me (playersnmv@aol.com) or text/call me at 951-544-0721. Ty


Adam

Originally Posted by 6erWebb

Sure is Nashville is my closest one. I forgot to ask if it comes with the handle..

I can pm you my email if that would be better.

-Webb

[budnikguy]

Had to remove 3 to find one with a gasket......here is pic!

Originally Posted by MikeCar

I'm interested in the chrome tailgate button bezel and gasket as pictured in the photo below. Are they in good shape and how much shipped to 95747?