High School Project Build - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

farmtrucks · 03-04-2015, 01:50 PM

Well we are back to school today. Some parts showed up while we were off.
T-N-T Motorsports(ksbrktracer) sent us some FREE 2" front drop springs -- thank you very much

farmtrucks · 03-04-2015, 01:53 PM

Steele Rubber donated us a whole box of goodies - thank you so much

farmtrucks · 03-04-2015, 01:57 PM

I went by No Limit Engineering while we were off for snow and Rob give us one of his new transmission crossmembers. Thanks Rob.

**Dieselwrencher** · 03-04-2015, 06:35 PM

Nice parts and very cool on to the sponsors/shops helping out! Are you guys getting the ice/freezing rain down there now?

**Advanced Design** · 03-04-2015, 06:35 PM

Kudo's to the vendors!

farmtrucks · 03-04-2015, 09:04 PM

Quote:

Originally Posted by Dieselwrencher

Nice parts and very cool on to the sponsors/shops helping out! Are you guys getting the ice/freezing rain down there now?

It's suppose to hit tonight -- so we will probably be out tomorrow and Friday.

farmtrucks · 03-09-2015, 09:59 AM

Well we are back to school after all of our snow, ice and then all the flooding.
This morning we put on some Cpp drop spindles, 2" spring that came from TNT Motorsports. Also some drilled and slotted rotors that were donated by Nsane hot rods - thanks Dewayne. Nsane has a great selection of parts

farmtrucks · 03-10-2015, 09:31 AM

More nice pieces coming for the truck. EFI tank with pump installed that was donated by Boyd Tanks. What a super nice tank - thanks Dave.

**Advanced Design** · 03-10-2015, 10:47 AM

Nice parts! I will be remembering these vendors as I need parts. Will the truck be burning gas before the school year ends?

farmtrucks · 03-10-2015, 11:58 AM

Quote:

Originally Posted by Advanced Design

Nice parts! I will be remembering these vendors as I need parts. Will the truck be burning gas before the school year ends?

I'm hoping that we get it done by then

ol_skool_chevy · 03-10-2015, 12:04 PM

What size rear tires?????????

**RRR18** · 03-10-2015, 12:17 PM

Cool project.
Kids will remember forever.
Hard for me to think it has been since '98 in Tucson that we were playin around in auto class.

farmtrucks · 03-10-2015, 01:19 PM

Quote:

Originally Posted by ol_skool_chevy

What size rear tires?????????

Just depends on what wheels we end up with. We're looking for a set of 20's like a boss 338 or something else that looks. Anybody have any connections of some wheels?

ol_skool_chevy · 03-10-2015, 02:43 PM

Quote:

Originally Posted by farmtrucks

Just depends on what wheels we end up with. We're looking for a set of 20's like a boss 338 or something else that looks. Anybody have any connections of some wheels?

What are the size in the rear on this truck?

farmtrucks · 03-10-2015, 02:51 PM

Quote:

Originally Posted by ol_skool_chevy

what are the size in the rear on this truck?

265/70/15

ol_skool_chevy · 03-10-2015, 05:10 PM

Quote:

Originally Posted by farmtrucks

265/70/15

Perfect.....looks good

farmtrucks · 03-12-2015, 08:20 AM

Got tank installed yesterday

farmtrucks · 03-19-2015, 10:03 AM

Lesson for the day -- don't use 6 cyl mounts.
I always use v8 mounts - but I didn't have any, so I thought I would try the 6 cyl mount. No matter how you cut them it wouldn't work - it would help with a/c clearance but it throws everything else off. Now we gotta go find some v8 mounts.

Justin@EntropyRad · 03-20-2015, 09:41 AM

Like where it's heading!

farmtrucks · 03-20-2015, 09:47 PM

A buddy of mine brought by a set of mounts - but they were 6 cyl too. So we wasted most of the day chopping up the original mounts and making them work. I hope it will be worth the trouble - but we wont truly know until we try to fit the fan into the shroud.

SCOTI · 03-20-2015, 10:04 PM

Quote:

Originally Posted by farmtrucks

A buddy of mine brought by a set of mounts - but they were 6 cyl too. So we wasted most of the day chopping up the original mounts and making them work. I hope it will be worth the trouble - but we wont truly know until we try to fit the fan into the shroud.

The sbc mounts have the larger diameter hole @ the top correct?

farmtrucks · 03-21-2015, 07:46 AM

The v8 stands are about 2" shorter in height - that gets them closer to the the frame rails - which lets the motor set down further toward the crossmember. I've seen the large hole in both sets of mounts - I think hole size was small in early years, and went to the big hole around '70 - I think?

tyler_lay · 03-21-2015, 08:09 AM

iv got a set of V8 stands they have had some love with a hammer on driver side to fit header tube but i would be glad to send them your way if yours dont work out!!!!

farmtrucks · 03-21-2015, 09:49 AM

Quote:

Originally Posted by tyler_lay

iv got a set of V8 stands they have had some love with a hammer on driver side to fit header tube but i would be glad to send them your way if yours dont work out!!!!

I will keep you in mind

farmtrucks · 03-23-2015, 01:14 PM

We got under the dash coated with bed liner.
We have springbreak after today - so it be a few days before we get back to work.

03-04-2015, 01:50 PM	#76
farmtrucks Registered User Join Date: Jun 2011 Location: Sneedville, TN Posts: 831	Re: High School Project Build Well we are back to school today. Some parts showed up while we were off. T-N-T Motorsports(ksbrktracer) sent us some FREE 2" front drop springs -- thank you very much Attached Images __________________ High School Project I ---http://67-72chevytrucks.com/vboard/s...d.php?t=639174 High School Project II ---http://67-72chevytrucks.com/vboard/s...27#post7290427 High School Project III ---http://67-72chevytrucks.com/vboard/s...d.php?t=715832 High School Project IV (Tyler) ---http://67-72chevytrucks.com/vboard/s...d.php?t=780186

03-04-2015, 01:53 PM	#77
farmtrucks Registered User Join Date: Jun 2011 Location: Sneedville, TN Posts: 831	Re: High School Project Build Steele Rubber donated us a whole box of goodies - thank you so much Attached Images __________________ High School Project I ---http://67-72chevytrucks.com/vboard/s...d.php?t=639174 High School Project II ---http://67-72chevytrucks.com/vboard/s...27#post7290427 High School Project III ---http://67-72chevytrucks.com/vboard/s...d.php?t=715832 High School Project IV (Tyler) ---http://67-72chevytrucks.com/vboard/s...d.php?t=780186

03-04-2015, 01:57 PM	#78
farmtrucks Registered User Join Date: Jun 2011 Location: Sneedville, TN Posts: 831	Re: High School Project Build I went by No Limit Engineering while we were off for snow and Rob give us one of his new transmission crossmembers. Thanks Rob. Attached Images __________________ High School Project I ---http://67-72chevytrucks.com/vboard/s...d.php?t=639174 High School Project II ---http://67-72chevytrucks.com/vboard/s...27#post7290427 High School Project III ---http://67-72chevytrucks.com/vboard/s...d.php?t=715832 High School Project IV (Tyler) ---http://67-72chevytrucks.com/vboard/s...d.php?t=780186

03-04-2015, 06:35 PM	#79
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: High School Project Build Nice parts and very cool on to the sponsors/shops helping out! Are you guys getting the ice/freezing rain down there now? __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

03-04-2015, 06:35 PM	#80
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: High School Project Build Kudo's to the vendors! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

03-09-2015, 09:59 AM	#82
farmtrucks Registered User Join Date: Jun 2011 Location: Sneedville, TN Posts: 831	Re: High School Project Build Well we are back to school after all of our snow, ice and then all the flooding. This morning we put on some Cpp drop spindles, 2" spring that came from TNT Motorsports. Also some drilled and slotted rotors that were donated by Nsane hot rods - thanks Dewayne. Nsane has a great selection of parts Attached Images __________________ High School Project I ---http://67-72chevytrucks.com/vboard/s...d.php?t=639174 High School Project II ---http://67-72chevytrucks.com/vboard/s...27#post7290427 High School Project III ---http://67-72chevytrucks.com/vboard/s...d.php?t=715832 High School Project IV (Tyler) ---http://67-72chevytrucks.com/vboard/s...d.php?t=780186

03-10-2015, 09:31 AM	#83
farmtrucks Registered User Join Date: Jun 2011 Location: Sneedville, TN Posts: 831	Re: High School Project Build More nice pieces coming for the truck. EFI tank with pump installed that was donated by Boyd Tanks. What a super nice tank - thanks Dave. Attached Images __________________ High School Project I ---http://67-72chevytrucks.com/vboard/s...d.php?t=639174 High School Project II ---http://67-72chevytrucks.com/vboard/s...27#post7290427 High School Project III ---http://67-72chevytrucks.com/vboard/s...d.php?t=715832 High School Project IV (Tyler) ---http://67-72chevytrucks.com/vboard/s...d.php?t=780186

03-10-2015, 10:47 AM	#84
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: High School Project Build Nice parts! I will be remembering these vendors as I need parts. Will the truck be burning gas before the school year ends? __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

03-10-2015, 12:04 PM	#86
ol_skool_chevy Registered User Join Date: May 2010 Location: Hillsboro, Oregon 97123 Posts: 1,300	Re: High School Project Build What size rear tires????????? __________________ Measure with a yard stick Mark with Chalk Cut with a torch Built it yourself, don't count on others to to do it for you or with you. It will never get done

03-10-2015, 12:17 PM	#87
RRR18 Senior Member Join Date: Nov 2010 Location: Lordstown, OH / Wentzville, MO Posts: 870	Re: High School Project Build Cool project. Kids will remember forever. Hard for me to think it has been since '98 in Tucson that we were playin around in auto class. __________________ '67 BAD IDEA Follow on Instagram https://www.instagram.com/rtimes3c10/ Ryan

03-12-2015, 08:20 AM	#92
farmtrucks Registered User Join Date: Jun 2011 Location: Sneedville, TN Posts: 831	Re: High School Project Build Got tank installed yesterday Attached Images __________________ High School Project I ---http://67-72chevytrucks.com/vboard/s...d.php?t=639174 High School Project II ---http://67-72chevytrucks.com/vboard/s...27#post7290427 High School Project III ---http://67-72chevytrucks.com/vboard/s...d.php?t=715832 High School Project IV (Tyler) ---http://67-72chevytrucks.com/vboard/s...d.php?t=780186

03-19-2015, 10:03 AM	#93
farmtrucks Registered User Join Date: Jun 2011 Location: Sneedville, TN Posts: 831	Re: High School Project Build Lesson for the day -- don't use 6 cyl mounts. I always use v8 mounts - but I didn't have any, so I thought I would try the 6 cyl mount. No matter how you cut them it wouldn't work - it would help with a/c clearance but it throws everything else off. Now we gotta go find some v8 mounts. Attached Images __________________ High School Project I ---http://67-72chevytrucks.com/vboard/s...d.php?t=639174 High School Project II ---http://67-72chevytrucks.com/vboard/s...27#post7290427 High School Project III ---http://67-72chevytrucks.com/vboard/s...d.php?t=715832 High School Project IV (Tyler) ---http://67-72chevytrucks.com/vboard/s...d.php?t=780186

03-20-2015, 09:41 AM	#94
Justin@EntropyRad Registered User Join Date: Jan 2015 Location: Charlotte, NC Posts: 483	Re: High School Project Build Like where it's heading! __________________ * Call me NOT the website number* Justin Novick (773) 303-8251 Sales/Support Entropy Radiator / Engineered Cooling Products "The Sexiest Radiators For The Sexiest Hot Rods" - www.EntropyRad.com www.speedcooling.com

03-20-2015, 09:47 PM	#95
farmtrucks Registered User Join Date: Jun 2011 Location: Sneedville, TN Posts: 831	Re: High School Project Build A buddy of mine brought by a set of mounts - but they were 6 cyl too. So we wasted most of the day chopping up the original mounts and making them work. I hope it will be worth the trouble - but we wont truly know until we try to fit the fan into the shroud. __________________ High School Project I ---http://67-72chevytrucks.com/vboard/s...d.php?t=639174 High School Project II ---http://67-72chevytrucks.com/vboard/s...27#post7290427 High School Project III ---http://67-72chevytrucks.com/vboard/s...d.php?t=715832 High School Project IV (Tyler) ---http://67-72chevytrucks.com/vboard/s...d.php?t=780186

03-21-2015, 07:46 AM	#97
farmtrucks Registered User Join Date: Jun 2011 Location: Sneedville, TN Posts: 831	Re: High School Project Build The v8 stands are about 2" shorter in height - that gets them closer to the the frame rails - which lets the motor set down further toward the crossmember. I've seen the large hole in both sets of mounts - I think hole size was small in early years, and went to the big hole around '70 - I think? __________________ High School Project I ---http://67-72chevytrucks.com/vboard/s...d.php?t=639174 High School Project II ---http://67-72chevytrucks.com/vboard/s...27#post7290427 High School Project III ---http://67-72chevytrucks.com/vboard/s...d.php?t=715832 High School Project IV (Tyler) ---http://67-72chevytrucks.com/vboard/s...d.php?t=780186



Register or Log In To remove these advertisements.

03-21-2015, 08:09 AM	#98
tyler_lay Registered User Join Date: Dec 2013 Location: ramona ok Posts: 295	Re: High School Project Build iv got a set of V8 stands they have had some love with a hammer on driver side to fit header tube but i would be glad to send them your way if yours dont work out!!!!

03-23-2015, 01:14 PM	#100
farmtrucks Registered User Join Date: Jun 2011 Location: Sneedville, TN Posts: 831	Re: High School Project Build We got under the dash coated with bed liner. We have springbreak after today - so it be a few days before we get back to work. Attached Images __________________ High School Project I ---http://67-72chevytrucks.com/vboard/s...d.php?t=639174 High School Project II ---http://67-72chevytrucks.com/vboard/s...27#post7290427 High School Project III ---http://67-72chevytrucks.com/vboard/s...d.php?t=715832 High School Project IV (Tyler) ---http://67-72chevytrucks.com/vboard/s...d.php?t=780186

Register or Log In To remove these advertisements.