KS Parting a 70 custom 10 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Cash3481** · 09-17-2014, 09:14 PM

Quote:

Originally Posted by Already Gone

I know I'm a pain but if you haven't sent my stuff yet I could use the rear ( red ) side marker lenses. If you've already shipped, no problem.

Lol your killing me!
Done and here is the picture for proof the emblems are intact.

**Cash3481** · 09-17-2014, 09:20 PM

Quote:

Originally Posted by 68Bowtie4x4

Sorry I had some miscommunication.

I don't need the rear glass window itself, but I did want the rear window seal and trim if they were in good reusable condition?
I do want the windshield rear view mirror if it includes the mounting screws.
Thanks,
Doug

Quote:

Originally Posted by 68Bowtie4x4

Out of curiosity how much to ship a tinted rear glass and seal to zip 97801?

About $30

Quote:

Originally Posted by 70chev20

How much for the ac?

What parts exactly? If you want the boxes on both sides of the firewall except the engine brackets and condenser I'll do $150 plus shipping. Let me know.

chuckmc8 · 09-18-2014, 06:00 AM

Payment sent for booster and brackets. Thanks!

**Already Gone** · 09-18-2014, 11:29 AM

Quote:

Originally Posted by Cash3481

Lol your killing me!
Done and here is the picture for proof the emblems are intact.

Thank you and I had no doubt they'd be in good shape. Once you get them shipped and priced let me know the amount and I'll pay you right away.

**Cash3481** · 09-18-2014, 01:03 PM

Quote:

Originally Posted by chuckmc8

Payment sent for booster and brackets. Thanks!

Quote:

Originally Posted by Already Gone

Thank you and I had no doubt they'd be in good shape. Once you get them shipped and priced let me know the amount and I'll pay you right away.

both packages are mailing out today!
Ill send the tracking on them once they are headed out your ways!

Jake1971 · 09-18-2014, 07:23 PM

Hey Mike, I need your PayPal address to send the $20 for the arm rests.

If the bolts holding the push bar together is the hold-up, check the shipping for it intact (that may be the deal breaker). I suggested disassembly to save on shipping.

**Cash3481** · 09-18-2014, 08:50 PM

Quote:

Originally Posted by Jake1971

Hey Mike, I need your PayPal address to send the $20 for the arm rests.

If the bolts holding the push bar together is the hold-up, check the shipping for it intact (that may be the deal breaker). I suggested disassembly to save on shipping.

Pm sent and I think your right. It's gonna be expensive.
I'll get it apart, just gonna take a few days.
I gotta clear stuff out this week, then I'll concentrate on it.

Jake1971 · 09-18-2014, 08:57 PM

Quote:

Originally Posted by Cash3481

Pm sent and I think your right. It's gonna be expensive.
I'll get it apart, just gonna take a few days.
I gotta clear stuff out this week, then I'll concentrate on it.

PayPal sent for the armrests. Take your time as my build is a long ways from needing the push bar.

jbear · 09-19-2014, 09:56 AM

Is that and 8' bed? (It looks like it, but I just wanted to make sure) If so, is that right side body molding, aft of the wheel opening, in good shape? It looks straight in the picture, but kind of hard to tell. If "yes" to both, and you can get it off, can I get a price shipped to 30064? Thanks!

jbear · 09-19-2014, 11:21 AM

Since "good" can be subjective, I'm looking for something in better condition than this:

**Cash3481** · 09-19-2014, 11:25 AM

Quote:

Originally Posted by jbear

Is that and 8' bed? (It looks like it, but I just wanted to make sure) If so, is that right side body molding, aft of the wheel opening, in good shape? It looks straight in the picture, but kind of hard to tell. If "yes" to both, and you can get it off, can I get a price shipped to 30064? Thanks!

Quote:

Originally Posted by jbear

Since "good" can be subjective, I'm looking for something in better condition than this:

LOL! I got ya! I have some additional ones out there I can look at too. $15 plus shipping if its in "good" condition. LOL

jbear · 09-19-2014, 03:05 PM

That will work. If you PM me contact info & how you want to be paid I'll take it. Thanks.

Since you mentioned others, I'm also looking for the upper band of trim for the tailgate. I don't have a picture of that one though, it's totally gone.

**CUSTOM/10** · 09-19-2014, 05:25 PM

Do you still have the radio knobs and hardware, I don't need the radio or speaker, just knobs, hardware and radio bracket .

Gary

**Cash3481** · 09-19-2014, 08:18 PM

Quote:

Originally Posted by jbear

That will work. If you PM me contact info & how you want to be paid I'll take it. Thanks.

Since you mentioned others, I'm also looking for the upper band of trim for the tailgate. I don't have a picture of that one though, it's totally gone.

Here is a pic of what I have in the piece you needed. Its "ok" but better that you picture. I would not call it "good" just better than what's there. Little work and it will be than what you have.

**Cash3481** · 09-19-2014, 08:19 PM

Quote:

Originally Posted by CUSTOM/10

Do you still have the radio knobs and hardware, I don't need the radio or speaker, just knobs, hardware and radio bracket .

Gary

I have the radio bracket out there and several speaker brackets but no knobs.

jbear · 09-19-2014, 09:24 PM

Quote:

Originally Posted by Cash3481

Here is a pic of what I have in the piece you needed. Its "ok" but better that you picture. I would not call it "good" just better than what's there. Little work and it will be than what you have.

It's not bent all to crap like my current one, so step in the right direction. I'll buy it.

Jim53066 · 09-20-2014, 05:58 PM

Cash,
How much for the power steering box, power steering pump and hoses (or lines) shipped to 53066

Thanks JIM

**Cash3481** · 09-20-2014, 06:02 PM

Quote:

Originally Posted by Jim53066

Cash,
How much for the power steering box, power steering pump and hoses (or lines) shipped to 53066

Thanks JIM

Box $50
P/S pump and lines are sold local already.
I may have another set out there, I'll check tonight.
Let's see if I have them before I get a quote.

**Cash3481** · 09-20-2014, 06:10 PM

Quote:

Originally Posted by Jim53066

Cash,
How much for the power steering box, power steering pump and hoses (or lines) shipped to 53066

Thanks JIM

Box $50
P/S pump and lines are sold local already.
I may have another set out there, I'll check tonight.
Let's see if I have them before I get a quote.

70 stepside · 09-21-2014, 11:37 PM

Cash, do you still have the right,center, left grill support brackets for the 70 grill? how much shipped 85043.

thanks.

**JimH2828** · 09-21-2014, 11:47 PM

How's the engine compartment AC box? Mine is pretty dry with some cracks so I'm looking to replace her with one that will really clean up well.

Thanks
Jim H

**CUSTOM/10** · 09-22-2014, 04:51 AM

How much for the radio bracket ?

Gary

**Cash3481** · 09-22-2014, 07:55 AM

Quote:

Originally Posted by 70 stepside

Cash, do you still have the right,center, left grill support brackets for the 70 grill? how much shipped 85043.
thanks.

I do, I'll check shipping and get you a pic this am.

Quote:

Originally Posted by JimH2828

How's the engine compartment AC box? Mine is pretty dry with some cracks so I'm looking to replace her with one that will really clean up well.
Thanks
Jim H

Pics in a little bit.

Quote:

Originally Posted by CUSTOM/10

How much for the radio bracket ?
Gary

$8 shipped priority

**CUSTOM/10** · 09-22-2014, 08:39 AM

I'll take the radio support bracket !

PM me your paypal info, or how ever you would like payment !

Gary

**CUSTOM/10** · 09-22-2014, 09:45 AM

Mike

I'm not possotive but from looking at other pictures there's like 4 peices that make up the radio / speaker bracket assembly. I have the little L bracket on the back of the radio, but nothing else.
I'm not using the speaker under the dash, just need the brackets to support the radio.
What peices do you have ?

Gary

09-18-2014, 06:00 AM	#78
chuckmc8 It's alsways something..... Join Date: Nov 2008 Location: Douglasville GA Posts: 1,171	Re: Parting a 70 custom 10 Payment sent for booster and brackets. Thanks! __________________ 1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e

09-18-2014, 07:23 PM	#81
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	Re: Parting a 70 custom 10 Hey Mike, I need your PayPal address to send the $20 for the arm rests. If the bolts holding the push bar together is the hold-up, check the shipping for it intact (that may be the deal breaker). I suggested disassembly to save on shipping. __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

09-19-2014, 09:56 AM	#84
jbear Registered User Join Date: May 2013 Location: Marietta, GA Posts: 10	Re: Parting a 70 custom 10 Is that and 8' bed? (It looks like it, but I just wanted to make sure) If so, is that right side body molding, aft of the wheel opening, in good shape? It looks straight in the picture, but kind of hard to tell. If "yes" to both, and you can get it off, can I get a price shipped to 30064? Thanks!

09-19-2014, 11:21 AM	#85
jbear Registered User Join Date: May 2013 Location: Marietta, GA Posts: 10	Re: Parting a 70 custom 10 Since "good" can be subjective, I'm looking for something in better condition than this:

09-19-2014, 03:05 PM	#87
jbear Registered User Join Date: May 2013 Location: Marietta, GA Posts: 10	Re: Parting a 70 custom 10 That will work. If you PM me contact info & how you want to be paid I'll take it. Thanks. Since you mentioned others, I'm also looking for the upper band of trim for the tailgate. I don't have a picture of that one though, it's totally gone.

09-19-2014, 05:25 PM	#88
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,871	Re: Parting a 70 custom 10 Do you still have the radio knobs and hardware, I don't need the radio or speaker, just knobs, hardware and radio bracket . Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

09-20-2014, 05:58 PM	#92
Jim53066 Registered User Join Date: Aug 2013 Location: SE Wisconsin Posts: 129	Re: Parting a 70 custom 10 Cash, How much for the power steering box, power steering pump and hoses (or lines) shipped to 53066 Thanks JIM

09-21-2014, 11:37 PM	#95
70 stepside Registered User Join Date: Feb 2013 Location: Phoenix,Az Posts: 47	Re: Parting a 70 custom 10 Cash, do you still have the right,center, left grill support brackets for the 70 grill? how much shipped 85043. thanks.

09-21-2014, 11:47 PM	#96
JimH2828 Senior Member Join Date: Oct 2012 Location: Cumming GA Posts: 621	Re: Parting a 70 custom 10 How's the engine compartment AC box? Mine is pretty dry with some cracks so I'm looking to replace her with one that will really clean up well. Thanks Jim H

09-22-2014, 04:51 AM	#97
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,871	Re: Parting a 70 custom 10 How much for the radio bracket ? Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

09-22-2014, 08:39 AM	#99
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,871	Re: Parting a 70 custom 10 I'll take the radio support bracket ! PM me your paypal info, or how ever you would like payment ! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

09-22-2014, 09:45 AM	#100
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,871	Re: Parting a 70 custom 10 Mike I'm not possotive but from looking at other pictures there's like 4 peices that make up the radio / speaker bracket assembly. I have the little L bracket on the back of the radio, but nothing else. I'm not using the speaker under the dash, just need the brackets to support the radio. What peices do you have ? Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 09-22-2014 at 09:54 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.