KS parting 1970 chevy 2wd - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 11-29-2014, 05:15 PM

70chevyBB, pic

Dirt's72 · 11-29-2014, 06:05 PM

Randy bum deal on the carpet. I'll get in line on the lighter, taillight stuff and bumper,
thanks.

**Already Gone** · 11-29-2014, 06:45 PM

Quote:

Originally Posted by teeitup

another pic of vent, it has 2 broken clips on back. Also cluster panel broke when I took it off

I love your honesty Randy. We are good to go on the parts. Thanks for the screws/hardware as well and if can send the A/C vent screws as well that would be good. Get the a total price with shipping and I'll pay you by PayPal.

teeitup · 11-29-2014, 06:55 PM

Derrick, I'll find out on the taillight stuff and bumper from other members and get back with you

Already Gone, I will try to get a quote from post office on Mon afternoon

Thanks Randy

**zicc1835** · 11-29-2014, 10:48 PM

Quote:

Originally Posted by teeitup

Zicc1835, harness was trashed. It did have gravel guards, $15 plus shipping for pair

i will take them ship to 07981 let me know what you want for that Antique plate ill take it if it is for sale i have your PP info
thanks
Jess

**Cash3481** · 11-30-2014, 12:22 AM

Quote:

Originally Posted by teeitup

Cash3481, Mike, tag bracket is nice $20. Bumper brackets inner ones are rusty but still hold good, outers are good. $20 for them, wheels are $60

Randy,
I'll take it all. I'll get it mailed out Monday or send me your paypal.

Jake1971 · 11-30-2014, 01:24 AM

Quote:

Originally Posted by teeitup

Jake1971, Paul, vents are black. Key does not fit door looks

Hey Randy, bummer about the floor coverings and the locks.
I will take the defrost vents,
Cig lighter setup with the wire harness (my harness is toasted),
Dash cluster if it get to me. Another board member, Tom (tbone1964), should have a good bezel.
Did the deal on the bench seat fall through? If so, I am still interested in the bottom foam.
LMK total so I can *Smash* the PayPal button for you.
Thanks again!
Paul

**70CHEVYBB** · 11-30-2014, 11:57 AM

Randy, seem to have lost my gas pedal get me a price and you can ship it with the swaybar. Thanks, Wes

*low&slow* · 11-30-2014, 03:44 PM

Randy, I'm going to have to pass on the rear bumper as I'm not quite to the point in my build. Thanks though.

teeitup · 11-30-2014, 04:15 PM

Jess, I'll get a total Mon evening for you

Mike, I'll pm you info

Paul, $10 for defrost vents, $15 for cig light assembly, plus shipping, I'll get the total Mon evening

Wes, I will get it shipped out this week, I'll throw in gas pedal setup, the pedal is warped some

Low&slow, no problem

Thanks Randy

**70CHEVYBB** · 11-30-2014, 04:43 PM

I just need the plastic pedal, Thanks

BigRed76 · 11-30-2014, 06:43 PM

Randy,
I need the evaporator core housing, but only the smaller half where the vacuum canister attaches to. Will you sell that separately from the rest of the a/c stuff?

jamyers · 11-30-2014, 07:03 PM

Randy, how much for the carb spacer to 79508, and

What diameter is the steering wheel, and do you have the horn button (I have the horn spring bits)

teeitup · 12-01-2014, 09:29 AM

Wes, it is yours

BigRed76, let me look, this one is broke, I have others out there maybe one of them is good

jamyers, $8 for the spacer plus shipping. No horn cap for wheel, sorry, $10 plus shipping for it. I can get a measurement if still interested

Thanks Randy

BigRed76 · 12-01-2014, 10:49 AM

Ok just let me know. Mine is broken also.

teeitup · 12-01-2014, 07:18 PM

Zach, for just the plastic side piece $32 shipped

Jake1971 · 12-01-2014, 08:58 PM

Quote:

Originally Posted by teeitup

Paul, $10 for defrost vents, $15 for cig light assembly, plus shipping, I'll get the total Mon evening.
Thanks Randy

Hey Randy, payment sent, included PayPal fees. Thanks again!

BigRed76 · 12-02-2014, 12:05 AM

Quote:

Originally Posted by teeitup

Zach, for just the plastic side piece $32 shipped

I'll take it. I can do PayPal, just need your address, thanks.

yellowGT · 12-02-2014, 01:34 AM

Randy please Send me a set of rear taillight lenses and backup lenses for a truck if you have any. Shipping would be to 75040. Please let me know what I owe you.

teeitup · 12-02-2014, 09:36 AM

Zach, info sent

yellowGT, I'll look but I think I'm sold out of lens right now

Thanks Randy

teeitup · 12-02-2014, 08:33 PM

Everyone who has paid, your parts are shipping out Wed either USPS or Fed Ex. Thanks Randy

teeitup · 12-02-2014, 08:34 PM

Also glove box door, gauge setup, ash tray is still for sale. Thanks Randy

jamyers · 12-02-2014, 08:38 PM

Quote:

Originally Posted by teeitup

jamyers, $8 for the spacer plus shipping. No horn cap for wheel, sorry, $10 plus shipping for it. I can get a measurement if still interested

Thanks Randy

I'll take the spacer, and am still interested in the steering wheel, I'm looking to change from manual to power steering and want a smaller wheel. Please let me know the diameter.

teeitup · 12-02-2014, 08:44 PM

Spacer is yours, I will get a measurement on wheel tomorrow night. Thanks Randy

Jake1971 · 12-03-2014, 02:42 PM

Quote:

Originally Posted by teeitup

Also glove box door, gauge setup, ash tray is still for sale. Thanks Randy

Hey Randy, I will take the gauge cluster setup as stated earlier.
Also still interested in the bottom bench seat foam. LMK total to 78602.
Thanks again!

11-29-2014, 05:15 PM	#76
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting 1970 chevy 2wd 70chevyBB, pic Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-29-2014, 06:05 PM	#77
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: parting 1970 chevy 2wd Randy bum deal on the carpet. I'll get in line on the lighter, taillight stuff and bumper, thanks.

11-29-2014, 06:55 PM	#79
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting 1970 chevy 2wd Derrick, I'll find out on the taillight stuff and bumper from other members and get back with you Already Gone, I will try to get a quote from post office on Mon afternoon Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-30-2014, 11:57 AM	#83
70CHEVYBB Senior Member Join Date: Feb 2012 Location: chillicothe, illinois Posts: 690	Re: parting 1970 chevy 2wd Randy, seem to have lost my gas pedal get me a price and you can ship it with the swaybar. Thanks, Wes

11-30-2014, 03:44 PM	#84
low&slow Account Suspended Join Date: Jan 2009 Location: Kuna, Idaho Posts: 1,046	Re: parting 1970 chevy 2wd Randy, I'm going to have to pass on the rear bumper as I'm not quite to the point in my build. Thanks though.

11-30-2014, 04:15 PM	#85
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting 1970 chevy 2wd Jess, I'll get a total Mon evening for you Mike, I'll pm you info Paul, $10 for defrost vents, $15 for cig light assembly, plus shipping, I'll get the total Mon evening Wes, I will get it shipped out this week, I'll throw in gas pedal setup, the pedal is warped some Low&slow, no problem Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-30-2014, 04:43 PM	#86
70CHEVYBB Senior Member Join Date: Feb 2012 Location: chillicothe, illinois Posts: 690	Re: parting 1970 chevy 2wd I just need the plastic pedal, Thanks

11-30-2014, 06:43 PM	#87
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: parting 1970 chevy 2wd Randy, I need the evaporator core housing, but only the smaller half where the vacuum canister attaches to. Will you sell that separately from the rest of the a/c stuff? __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

11-30-2014, 07:03 PM	#88
jamyers Registered User Join Date: Jan 2013 Location: Buffalo Gap, TX Posts: 229	Re: parting 1970 chevy 2wd Randy, how much for the carb spacer to 79508, and What diameter is the steering wheel, and do you have the horn button (I have the horn spring bits) __________________ My Chevy Truck Project Build Thread '62 Ranchero - 200 I6, 3-on-the-tree, power nothing. '71 LeSabre - 455 Stage 1, power everything.

12-01-2014, 09:29 AM	#89
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting 1970 chevy 2wd Wes, it is yours BigRed76, let me look, this one is broke, I have others out there maybe one of them is good jamyers, $8 for the spacer plus shipping. No horn cap for wheel, sorry, $10 plus shipping for it. I can get a measurement if still interested Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-01-2014, 10:49 AM	#90
BigRed76 Registered User Join Date: Jan 2010 Location: Loveland, CO Posts: 1,921	Re: parting 1970 chevy 2wd Ok just let me know. Mine is broken also. __________________ Zach 1970 Chevrolet Custom Camper K20 1971 GMC Super K2500, 12V/NV4500 swap in progress 1971 Chevrolet Custom C10 1972 Chevrolet Custom Deluxe C20, 5.3/4L60E 1972 Oldsmobile Cutlass Supreme, 455/TH400, 3.73 posi 2004 GMC Sierra 2500HD, LB7/Allison, CCSB 2005 GMC Sierra 1500, 5.3/4L60E, CCSB

12-01-2014, 07:18 PM	#91
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting 1970 chevy 2wd Zach, for just the plastic side piece $32 shipped Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-02-2014, 01:34 AM	#94
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: parting 1970 chevy 2wd Randy please Send me a set of rear taillight lenses and backup lenses for a truck if you have any. Shipping would be to 75040. Please let me know what I owe you. __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

12-02-2014, 09:36 AM	#95
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting 1970 chevy 2wd Zach, info sent yellowGT, I'll look but I think I'm sold out of lens right now Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-02-2014, 08:33 PM	#96
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting 1970 chevy 2wd Everyone who has paid, your parts are shipping out Wed either USPS or Fed Ex. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

12-02-2014, 08:34 PM	#97
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting 1970 chevy 2wd Also glove box door, gauge setup, ash tray is still for sale. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

12-02-2014, 08:44 PM	#99
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: parting 1970 chevy 2wd Spacer is yours, I will get a measurement on wheel tomorrow night. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.