OR Parting 1972 C20 - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**cericd** · 02-12-2015, 02:49 PM

Hey Thomas. Is this setup off a C/10? Could you take a pic of the front of the booster. I just want to make sure it has the Delco/Moraine logo stamped into it (like in the attached pic). Any issues getting this setup boxed up and shipped safely so no damage occurs during shipment? What would be the cost of having the booster, prop valve, push rod and all associated brackets shipped to 77018 (business address). What carrier would be used?

67ChevNut · 02-12-2015, 03:14 PM

Interesred on the inner & outter grill. How much to 78852, in case is not sold.

DLTruck1973 · 02-13-2015, 07:19 PM

Quote:

Originally Posted by cericd

Hey Thomas. Is this setup off a C/10? Could you take a pic of the front of the booster. I just want to make sure it has the Delco/Moraine logo stamped into it (like in the attached pic). Any issues getting this setup boxed up and shipped safely so no damage occurs during shipment? What would be the cost of having the booster, prop valve, push rod and all associated brackets shipped to 77018 (business address). What carrier would be used?

Here are the photos you requested. No problem with packing everything for a damage free ride. It will include everything minus the master cylinder. Booster bracket from firewall, the booster itself, the 2 braces, prop valve and the two short lines. $115.00 plus the shipping.

We use UPS here. I just checked shipping and you will be at $45.00 so the total would be $160.00

Thank you,
Thomas

DLTruck1973 · 02-13-2015, 07:21 PM

Quote:

Originally Posted by 67ChevNut

Interesred on the inner & outter grill. How much to 78852, in case is not sold.

How nice are you looking for? The one on this truck is not good at all. I may have other ones in better shape but have to look. I ship grill shells in wood boxes to prevent damage.

Let me know what you are looking for condition wise and I will see what we can help you with,

Thank you,
Thomas

pontiacpro · 02-13-2015, 08:20 PM

How much for the high hump transmission cover shipped to 17331

DLTruck1973 · 02-14-2015, 03:01 AM

Quote:

Originally Posted by pontiacpro

How much for the high hump transmission cover shipped to 17331

High hump for a 2wd 4 speed is $75.00 plus shipping. I can get you a shipping quote on Monday.

Thank you for the interest,
Thomas

72kool · 02-14-2015, 11:07 AM

1972 gmc c20. and yes i need the complete set.id consider older years as well.

Vintage Windmills · 02-14-2015, 11:48 AM

Hi Thomas/Tom I'll take the no spin decal, how about cutting so theres a 2 to 3 inch border?

DLTruck1973 · 02-14-2015, 01:26 PM

Quote:

Originally Posted by 72kool

1972 gmc c20. and yes i need the complete set.id consider older years as well.

OK,

I will see what I can find for you on Monday.

Thank you and have a good weekend,
Thomas

DLTruck1973 · 02-14-2015, 01:28 PM

Quote:

Originally Posted by Vintage Windmills

Hi Thomas/Tom I'll take the no spin decal, how about cutting so theres a 2 to 3 inch border?

No problem sir. I will cut it with plenty of boarder for you to insure the decal does not get damaged.

Shipping should be no more than $6.00, so figure $16.00 total.

Thank you very much,
Thomas

67ChevNut · 02-14-2015, 10:35 PM

Good presentable condition, not dented too bad on the corners or outter edges. Like to have inner grille in the best possible shape, hope you have something I like.

Vintage Windmills · 02-14-2015, 10:39 PM

Quote:

Originally Posted by DLTruck1973

No problem sir. I will cut it with plenty of boarder for you to insure the decal does not get damaged.

Shipping should be no more than $6.00, so figure $16.00 total.

Thank you very much,
Thomas

Sounds good, please send me a PM with pay info

pontiacpro · 02-15-2015, 12:11 PM

If you can get me the shipping quote and pm me with either pay pal info or which payment option you will take. I will most likely take it. Thanks

w00dst0ck · 02-15-2015, 12:34 PM

Looking for a powersteering gearbox.

**cericd** · 02-15-2015, 08:55 PM

Quote:

Originally Posted by DLTruck1973

Here are the photos you requested. No problem with packing everything for a damage free ride. It will include everything minus the master cylinder. Booster bracket from firewall, the booster itself, the 2 braces, prop valve and the two short lines. $115.00 plus the shipping.

We use UPS here. I just checked shipping and you will be at $45.00 so the total would be $160.00

Thank you,
Thomas

Thanks the extra photos Thomas but I'm going to pass. I received the cig. lighter the other day. Thanks for the excellent job of packing it.

DLTruck1973 · 02-16-2015, 12:25 PM

Quote:

Originally Posted by cericd

Thanks the extra photos Thomas but I'm going to pass. I received the cig. lighter the other day. Thanks for the excellent job of packing it.

No problem Chris. Let me know if you ever need anything else.

Thank you,
Thomas

DLTruck1973 · 02-16-2015, 02:08 PM

Quote:

Originally Posted by Vintage Windmills

Sounds good, please send me a PM with pay info

PM sent,

Thank you,
Thomas

DLTruck1973 · 02-16-2015, 02:10 PM

Quote:

Originally Posted by w00dst0ck

Looking for a powersteering gearbox.

Power steering gear box for a 1972 C20 is $75.00 plus shipping. I would need a zip code for a accurate shipping quote, if interested.

Thank you for the interest,
Thomas

DLTruck1973 · 02-16-2015, 02:11 PM

Quote:

Originally Posted by pontiacpro

If you can get me the shipping quote and pm me with either pay pal info or which payment option you will take. I will most likely take it. Thanks

PM on the way,

Thank you,
Thomas

DLTruck1973 · 02-16-2015, 02:24 PM

Quote:

Originally Posted by 67ChevNut

Good presentable condition, not dented too bad on the corners or outter edges. Like to have inner grille in the best possible shape, hope you have something I like.

Here is the nicest one I have currently. For the complete shell and inner grill, I am asking $300.00 plus shipping. I think it would clean up nice. Not perfect but it is a nice used piece.

The last one I quoted to ship was &175.00 for shipping. I ship in a wood box to avoid shipping damage. This will depend on your zip code of course.

Let me know,

Thank you for the interest,
Thomas

DLTruck1973 · 02-16-2015, 02:26 PM

Quote:

Originally Posted by 72kool

1972 gmc c20. and yes i need the complete set.id consider older years as well.

What kind of condition are you looking for. I may have a very nice set that is going to be around $225.00 plus shipping. These caps are either real nice or beat up pretty bad. I don't have any in between.

Let me know.
Thank you for the interest,
Thomas

72kool · 02-19-2015, 11:18 AM

depends how beat up they are. do you have pictures of both sets?

c20pickup · 02-19-2015, 01:17 PM

Is the no spin still in the axle?

DLTruck1973 · 02-19-2015, 01:24 PM

Quote:

Originally Posted by 72kool

depends how beat up they are. do you have pictures of both sets?

I will see what I can find and post some photos up for you. It may take me some time so bare with me.

Thank you for the interest,
Thomas

DLTruck1973 · 02-19-2015, 01:45 PM

Quote:

Originally Posted by c20pickup

Is the no spin still in the axle?

It is but I need to pull it, clean it and inspect it to make sure it is worth selling. It may be sometime before I can do that. I will keep you posted.

Thank you for the interest,
Thomas

02-12-2015, 02:49 PM	#76
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Parting 1972 C20 Hey Thomas. Is this setup off a C/10? Could you take a pic of the front of the booster. I just want to make sure it has the Delco/Moraine logo stamped into it (like in the attached pic). Any issues getting this setup boxed up and shipped safely so no damage occurs during shipment? What would be the cost of having the booster, prop valve, push rod and all associated brackets shipped to 77018 (business address). What carrier would be used? Attached Images __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

02-12-2015, 03:14 PM	#77
67ChevNut Registered User Join Date: Mar 2009 Location: Eagle Pass, Posts: 195	Re: Parting 1972 C20 Interesred on the inner & outter grill. How much to 78852, in case is not sold.

02-13-2015, 08:20 PM	#80
pontiacpro Registered User Join Date: Jul 2011 Location: hanover,pa Posts: 19	Re: Parting 1972 C20 How much for the high hump transmission cover shipped to 17331

02-14-2015, 11:07 AM	#82
72kool Registered User Join Date: Dec 2012 Location: kearney nebraska Posts: 613	Re: Parting 1972 C20 1972 gmc c20. and yes i need the complete set.id consider older years as well.

02-14-2015, 11:48 AM	#83
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting 1972 C20 Hi Thomas/Tom I'll take the no spin decal, how about cutting so theres a 2 to 3 inch border? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

02-14-2015, 10:35 PM	#86
67ChevNut Registered User Join Date: Mar 2009 Location: Eagle Pass, Posts: 195	Re: Parting 1972 C20 Good presentable condition, not dented too bad on the corners or outter edges. Like to have inner grille in the best possible shape, hope you have something I like.

02-15-2015, 12:11 PM	#88
pontiacpro Registered User Join Date: Jul 2011 Location: hanover,pa Posts: 19	Re: Parting 1972 C20 If you can get me the shipping quote and pm me with either pay pal info or which payment option you will take. I will most likely take it. Thanks

02-15-2015, 12:34 PM	#89
w00dst0ck Registered User Join Date: Jul 2013 Location: Austin, Texas Posts: 349	Re: Parting 1972 C20 Looking for a powersteering gearbox.

02-19-2015, 11:18 AM	#97
72kool Registered User Join Date: Dec 2012 Location: kearney nebraska Posts: 613	Re: Parting 1972 C20 depends how beat up they are. do you have pictures of both sets?

02-19-2015, 01:17 PM	#98
c20pickup Registered User Join Date: Apr 2013 Location: Brighton, WI Posts: 504	Re: Parting 1972 C20 Is the no spin still in the axle?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.