AZ Cabs for parts/pieces

[t korinek]

Sure , both lower corners $20 ea + shipping

[67chevy4x4c]

Parts came in very good parts thanks

[Possmguts]

Originally Posted by Possmguts

Are you able to cut out the lower windshield channel? I need left and right lower from the corners to about 16 inches in....

Asking again.... maybe you missed this question...

[t korinek]

Possumguts $20 for each front window channel corner + shipping
67Chevy4x4c thanks for letting me know

[Dave333]

I'm looking for the cab roof line where it meets the windshield from the inside. Need it 6" wide and across to the passenger side visor mount but if you want to cut it as one whole piece that'd work for me. Picture shows what I'm looking for.

Just let me know price shipped to 30052 and how you want paid and I'll get it to you.

Thanks.

[Possmguts]

Originally Posted by t korinek

Possumguts $20 for each front window channel corner + shipping
67Chevy4x4c thanks for letting me know

I need 16 inches on driver side and 12 inches on passenger side to 44408. It will be around end of this week before I can send money. Thanks.

[t korinek]

Dave333 Heres what I have cut off, if you want it trimmed down, cut in half, let me know.

possmguts how about these 2 cuts I have marked out here?

[Dave333]

I'll take it just as is. Just PM me with price and how to pay and I'll pay today. Thanks.

[Possmguts]

[QUOTE=t possmguts how about these 2 cuts I have marked out here?[/QUOTE]

Yeah man those look like they should do the trick. Send me a PM with your info and Ill give ya my address. Thanks

[OneWheelPeel]

I'm looking for the area under the dash / windshield cowl area on the passenger side from top of the kick panel vent from the area just forward of the door (A) pillar to firewall rail and over to about where the glove box ends.

Also looking for the door weatherstrip lip on the pass side where it meets the A pillar back about 8 inches and up to the flat part of the inside cab roof.

Got anything like that left?

Thanks!

[t korinek]

possmguts, heres pics of the pieces cut off, the driver side came apart at the pinch weld, but only has surface rust.

OneWheelPeel pics of what i think your looking for

[Possmguts]

Originally Posted by t korinek

possmguts, heres pics of the pieces cut off, the driver side came apart at the pinch weld, but only has surface rust.

OneWheelPeel pics of what i think your looking for

looks good, I hope its enough. I couldve used the whole bottom after looking at mine again though. Let me know where to send payment. Thanks

[OneWheelPeel]

I'm looking for the inside sheet metal. I'm attaching some pics of my problem areas.

[t korinek]

possmguts pm sent

OneWheelPeel $45 for that lower inner cowl piece & $25 for the upper roof piece + figure shipping after its cut off.

Thanks,
Tom

[OneWheelPeel]

Originally Posted by t korinek

possmguts pm sent

OneWheelPeel $45 for that lower inner cowl piece & $25 for the upper roof piece + figure shipping after its cut off.

Thanks,
Tom

Tom,

That would work for me as long as shipping isn't some absurd amount.

Thanks,
Ken

[OneWheelPeel]

Hey Tom let me know when you get those parts cut out and where to send payment.

Thanks

[67chevy4x4c]

need some more cab parts if you have them here is the pic . I need the part for the fire wall and passenger side above the door

[Dave333]

Got my piece, everything looks great. Thanks.

[t korinek]

onewheelpeel Heres what I have cut off, if you can outline what you want off the cowl, I'll trim it down.

[OneWheelPeel]

Tom, I marked the area I need up in the pic... I don't need any of the inner cowl panel, I have a 1 piece replacement for that.

[djgebert]

Do you have one with a good solid low hump area? I am looking for a piece to weld in where the high hump is in my cab. I am looking for about 2" +/- larger than the bolt in high hump so I have a little extra to work with. Thanks Dan

[67chevy4x4c]

Parts came in thanks

[randy7426]

Hello I need a good solid roof for 69 c10 cut as low as posible to front cowl an from bottom of back window to bottom of drip rail in doors

[randy7426]

Hello I need a good solid roof for 69 c10 cut as low as posible to front cowl an from bottom of back window to bottom of drip rail in doors

[randy7426]

Hello I need cab for 69 c10 cut as low as possible in front by cowl an in back from lower back glass to below drip rail in door ship to Signal Mtn Tn. 37377