What did you do to your Suburban Today? - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

zellway · 09-24-2015, 03:06 PM

How did I miss this one?! I have been posting on the truck side.

I can't say I did much more then drive it like I have the past few years. I did use it as a truck if that counts?

Dburger · 10-05-2015, 12:05 PM

Drove one of them. 99% original 78,000 mile 1969 Suburban vs. flood water...

highwinger · 10-06-2015, 09:03 AM

I replaced the starter last night. My solenoid bat terminal was loose and became inconsistent cranking. I replaced with the newer, smaller, higher torque (http://www.summitracing.com/parts/PWM-9112) starter. Of course things are never easy. I had to remove the dust guard because it was scraping when I accelerated and/or turned (only made it one house down). It also starts great when cold but wouldn't restart after I got to work. I noticed last night it was slower after a short test drive.

**68SWB4x4** · 10-06-2015, 11:57 AM

Took the hubs off my dana 60 after finally getting the right spindle nut socket.
Progress is slow at the moment. I think I might spend some time detailing the engine bay, etc while I save funds for the next steps.
https://www.youtube.com/watch?v=y-yTvQLBJ5I

sierragrande71 · 10-07-2015, 09:23 PM

Finished buffing out most of the paint with rubbing compound and installed the 15x5.5 steelies on the front with a slightly smaller tire for more a rake look still need to install the drop spindles and do the disc brake conversion. Ignore my dead grass (due to the drought and higher water rates)

**68SWB4x4** · 10-09-2015, 02:00 PM

Quote:

Originally Posted by sierragrande71

Finished buffing out most of the paint with rubbing compound and installed the 15x5.5 steelies on the front with a slightly smaller tire for more a rake look still need to install the drop spindles and do the disc brake conversion. Ignore my dead grass (due to the drought and higher water rates)

Sweet stance!

All the plants are dried up here as well, Can barely keep the succulents alive

Number98 · 10-10-2015, 10:06 AM

Quote:

Originally Posted by sierragrande71

Finished buffing out most of the paint with rubbing compound and installed the 15x5.5 steelies on the front with a slightly smaller tire for more a rake look still need to install the drop spindles and do the disc brake conversion. Ignore my dead grass (due to the drought and higher water rates)

Looking good!

71_Burb · 10-11-2015, 01:23 AM

Very Nice sierragrande71 ..

Cobalt964ruf · 10-11-2015, 05:54 AM

finished the dana 70 front axle install this week... didn't turn out as planned. never does. but nonetheless... more work, more work, lol

sierragrande71 · 10-11-2015, 11:39 AM

Thanks everyone for the compliments! This is what she looked like before I got her.

highwinger · 10-12-2015, 10:21 AM

How to install a starter in only 6 days...

Wow, what a task that ended up being. I was able to physically install the starter last Monday night, but it took the rest of the week to get it right, specifically the wiring. I "upgraded" to the newer gear ratio starter which costs more but is smaller, lighter, less current and spins faster. I wasn't aware they are more sensitive to voltage. I rewired the electric fans to be off during start (when hot), I rewired the bat + & - increasing to 2awg wire. After all that, I still had to rewire the solenoid wire to go thru a relay. This gets the starter & solenoid voltage up over 11V...finally...and cranky very quick. I still have to reinstall the dust cover.

I also did a lot of timing gyrations thinking the initial timing was loading the engine too much which in turn was slowing the crank. In doing this, I did see the harmonic balancer seal coming out and a new plug wire gone from an exhaust manifold crack...my next week's entry in this thread.

4shongo · 10-19-2015, 09:35 AM

Installed drilled and slotted rotors, new drums, new wheel cylinders, new ceramic pads/shoes, drum spring kit, new wheel bearings/seals. It was a busy day. Huge improvement!! Glad I will not have to do that for a long time!!!!!!

highwinger · 10-19-2015, 10:29 AM

Quote:

Originally Posted by highwinger

How to install a starter in only 6 days...

... I still have to reinstall the dust cover.

I also did a lot of timing gyrations thinking the initial timing was loading the engine too much which in turn was slowing the crank. In doing this, I did see the harmonic balancer seal coming out and a new plug wire gone from an exhaust manifold crack...my next week's entry in this thread.

I spent Saturday getting those things taken care of. Although there wasn't a noticeable difference, there was definitely a comfortable feeling know some issues were resolved.

rocknss · 10-20-2015, 10:54 PM

Replaced the windshield washer pump and all hoses for the windshield washer.

71_Burb · 10-21-2015, 01:25 AM

I started carpeting the rear and made some new side panels along with that installed some rear Morel 6 1/2 coax. Still need to finish it off since my dogs ride back there figured should clean it up

sierragrande71 · 10-28-2015, 08:35 PM

Did a 5 lug and disc brake conversion with drop spindles from belltech.

Waders · 10-29-2015, 10:06 PM

Today when I walked by the ol burb I noticed a good layer of dust so I wrote "wash me" on the back window. The next time I walked by I crossed it out and wrote "finish me"

**Advanced Design** · 11-01-2015, 04:01 PM

It was so nice today we took the Burb to town with our Grandkids to celebrate my wife's birthday.

sierragrande71 · 11-12-2015, 12:10 AM

Kinda of an odd idea but something I've been pondering with the theme I'm going for, using a gun rack to haul vintage skateboards, the one pictured is not vintage however just for looks until I find an old 70's longboard.

sierragrande71 · 11-12-2015, 12:12 AM

I also just rolled the suburban on to the street to sweep out the garage

missionstreettattoo · 11-13-2015, 02:21 PM

well i caught mine on fire last night, from hot wires left hanging under the dash from the previous owner. so i added an amazingly real "been on fire" smell to my truck!

**Advanced Design** · 11-13-2015, 04:28 PM

Quote:

Originally Posted by missionstreettattoo

well i caught mine on fire last night, from hot wires left hanging under the dash from the previous owner. so i added an amazingly real "been on fire" smell to my truck!

Oh wow...hopefully minimal damage!

missionstreettattoo · 11-13-2015, 06:08 PM

i believe i put it out before it went crazy.

67 Burb · 11-16-2015, 01:42 AM

Because the weather was so nice, I took him for a little 150 mile cruise around S.W. Manitoba with a few other car guys and gals.

highwinger · 11-30-2015, 11:11 AM

Over the past week...

I replaced all the shocks with CPP's brand and replaced the rear lower brackets with the relocation bracket. I may replace the upper bracket too at some point, but this really helped the ride and moved the rears enough to not hit the axle. Nice to have a smoother ride.

The next few days were spent moving stuff from the house into a storage unit. I probably made at least 10 trips. Nice to have the ability to haul.

I took a day off and went to the Daytona Speedway for the Turkey Rod Run which fills the whole infield with classic show cars, clubs and cars/parts for sale . Nice to have a people hauler that doubles a classic show car too. I saw 5 other burbs there which is more than I've previously seen. I hope this means we're growing in popularity and price.

In all, it's a fun, useful vehicle.

09-24-2015, 03:06 PM	#76
zellway Registered User Join Date: Dec 2009 Location: Arizona City, AZ Posts: 747	Re: What did you do to your Suburban Today? How did I miss this one?! I have been posting on the truck side. I can't say I did much more then drive it like I have the past few years. I did use it as a truck if that counts? Attached Images __________________ ----------------------------------------------------------- Erik My 69 suburban http://67-72chevytrucks.com/vboard/s...d.php?t=530626 1970 C10 step Project Jiminy http://67-72chevytrucks.com/vboard/s...d.php?t=682647 RUST!? Thats just mother natures way of telling all of us.....MINE!!!!

10-05-2015, 12:05 PM	#77
Dburger Registered User Join Date: Apr 2013 Location: Columbia, SC Posts: 86	Re: What did you do to your Suburban Today? Drove one of them. 99% original 78,000 mile 1969 Suburban vs. flood water... __________________ 1953 Suburban Carryall 3106, 1993 S10 4x4 ext cab 1958 Suburban Carryall 3116 ex school bus 1959 Apache 36, 1984 C30 3+3 DRW 6.2 4MT 1967 C10 fleetside LWB, 1969 Chevy Suburban C10 1972 GMC Suburban C10 1972 Chevy Suburban C10 clam shell/tailgate

10-06-2015, 09:03 AM	#78
highwinger Registered User Join Date: May 2014 Location: Melbourne, FL Posts: 297	Re: What did you do to your Suburban Today? I replaced the starter last night. My solenoid bat terminal was loose and became inconsistent cranking. I replaced with the newer, smaller, higher torque (http://www.summitracing.com/parts/PWM-9112) starter. Of course things are never easy. I had to remove the dust guard because it was scraping when I accelerated and/or turned (only made it one house down). It also starts great when cold but wouldn't restart after I got to work. I noticed last night it was slower after a short test drive.

10-06-2015, 11:57 AM	#79
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	Re: What did you do to your Suburban Today? Took the hubs off my dana 60 after finally getting the right spindle nut socket. Progress is slow at the moment. I think I might spend some time detailing the engine bay, etc while I save funds for the next steps. https://www.youtube.com/watch?v=y-yTvQLBJ5I __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

10-07-2015, 09:23 PM	#80
sierragrande71 Registered User Join Date: Jan 2007 Location: Orland, CA Posts: 721	Re: What did you do to your Suburban Today? Finished buffing out most of the paint with rubbing compound and installed the 15x5.5 steelies on the front with a slightly smaller tire for more a rake look still need to install the drop spindles and do the disc brake conversion. Ignore my dead grass (due to the drought and higher water rates) Attached Images

10-11-2015, 01:23 AM	#83
71_Burb Registered User Join Date: Aug 2015 Location: Los Angeles Ca Posts: 34	Re: What did you do to your Suburban Today? Very Nice sierragrande71 ..

10-11-2015, 05:54 AM	#84
Cobalt964ruf Registered User Join Date: Jun 2014 Location: Piedmont, OK Posts: 364	Re: What did you do to your Suburban Today? finished the dana 70 front axle install this week... didn't turn out as planned. never does. but nonetheless... more work, more work, lol Attached Images __________________ 1971 K30 burb carbed LS6 th400 np205 d70f 14bff 4whl discs lifted 35 bfg's 1994 k3500 rcsb trophy truck ls427 4l85e bw4401 9.25ifs 14bff g80 35 bfg's 1998 K3500 rclb ls427 4l85e bw4401 9.25ifs 14bff g80 35 bfg's 1999 k3500 crewcab dually 4x4 496ci 4l85e bw4401 9.25ifs 14bff g80 6" lift 37 bfg's

10-11-2015, 11:39 AM	#85
sierragrande71 Registered User Join Date: Jan 2007 Location: Orland, CA Posts: 721	Re: What did you do to your Suburban Today? Thanks everyone for the compliments! This is what she looked like before I got her. Attached Images

10-12-2015, 10:21 AM	#86
highwinger Registered User Join Date: May 2014 Location: Melbourne, FL Posts: 297	Re: What did you do to your Suburban Today? How to install a starter in only 6 days... Wow, what a task that ended up being. I was able to physically install the starter last Monday night, but it took the rest of the week to get it right, specifically the wiring. I "upgraded" to the newer gear ratio starter which costs more but is smaller, lighter, less current and spins faster. I wasn't aware they are more sensitive to voltage. I rewired the electric fans to be off during start (when hot), I rewired the bat + & - increasing to 2awg wire. After all that, I still had to rewire the solenoid wire to go thru a relay. This gets the starter & solenoid voltage up over 11V...finally...and cranky very quick. I still have to reinstall the dust cover. I also did a lot of timing gyrations thinking the initial timing was loading the engine too much which in turn was slowing the crank. In doing this, I did see the harmonic balancer seal coming out and a new plug wire gone from an exhaust manifold crack...my next week's entry in this thread.

10-19-2015, 09:35 AM	#87
4shongo Registered User Join Date: Sep 2012 Location: Arlington, TN Posts: 315	Re: What did you do to your Suburban Today? Installed drilled and slotted rotors, new drums, new wheel cylinders, new ceramic pads/shoes, drum spring kit, new wheel bearings/seals. It was a busy day. Huge improvement!! Glad I will not have to do that for a long time!!!!!!

10-20-2015, 10:54 PM	#89
rocknss Registered User Join Date: Oct 2004 Location: Milwaukee, WI Posts: 403	Re: What did you do to your Suburban Today? Replaced the windshield washer pump and all hoses for the windshield washer. __________________ Steven 69 Chevy C10 Suburban 350 700R4 w/Disc brakes on all four corners 2017 50th Anniversary Camaro SS 2004 Chevy Impala LS 2016 Chevy Malibu LT

10-21-2015, 01:25 AM	#90
71_Burb Registered User Join Date: Aug 2015 Location: Los Angeles Ca Posts: 34	Re: What did you do to your Suburban Today? I started carpeting the rear and made some new side panels along with that installed some rear Morel 6 1/2 coax. Still need to finish it off since my dogs ride back there figured should clean it up Attached Images

10-28-2015, 08:35 PM	#91
sierragrande71 Registered User Join Date: Jan 2007 Location: Orland, CA Posts: 721	Re: What did you do to your Suburban Today? Did a 5 lug and disc brake conversion with drop spindles from belltech. Attached Images

10-29-2015, 10:06 PM	#92
Waders Registered User Join Date: Mar 2013 Location: Clancy, MT Posts: 33	Re: What did you do to your Suburban Today? Today when I walked by the ol burb I noticed a good layer of dust so I wrote "wash me" on the back window. The next time I walked by I crossed it out and wrote "finish me" __________________ 71 GMC swb 4x4 ...sold 72 suburban "family cruiser" in progress 67 chevy blazer truck 59 Chevy belair 2dr-high school sweetheart

11-01-2015, 04:01 PM	#93
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: What did you do to your Suburban Today? It was so nice today we took the Burb to town with our Grandkids to celebrate my wife's birthday. Attached Images __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap



Register or Log In To remove these advertisements.

11-12-2015, 12:10 AM	#94
sierragrande71 Registered User Join Date: Jan 2007 Location: Orland, CA Posts: 721	Re: What did you do to your Suburban Today? Kinda of an odd idea but something I've been pondering with the theme I'm going for, using a gun rack to haul vintage skateboards, the one pictured is not vintage however just for looks until I find an old 70's longboard. Attached Images

11-12-2015, 12:12 AM	#95
sierragrande71 Registered User Join Date: Jan 2007 Location: Orland, CA Posts: 721	Re: What did you do to your Suburban Today? I also just rolled the suburban on to the street to sweep out the garage Attached Images

11-13-2015, 02:21 PM	#96
missionstreettattoo Registered User Join Date: Apr 2013 Location: sapulpa oklahoma Posts: 151	Re: What did you do to your Suburban Today? well i caught mine on fire last night, from hot wires left hanging under the dash from the previous owner. so i added an amazingly real "been on fire" smell to my truck!

11-13-2015, 06:08 PM	#98
missionstreettattoo Registered User Join Date: Apr 2013 Location: sapulpa oklahoma Posts: 151	Re: What did you do to your Suburban Today? i believe i put it out before it went crazy.

11-16-2015, 01:42 AM	#99
67 Burb Registered User Join Date: Dec 2011 Location: Brandon, Manitoba, Canada Posts: 548	Re: What did you do to your Suburban Today? Because the weather was so nice, I took him for a little 150 mile cruise around S.W. Manitoba with a few other car guys and gals. Attached Images __________________ Bob 1967 2wd Burb, 350/TH350, 3.73 posi

11-30-2015, 11:11 AM	#100
highwinger Registered User Join Date: May 2014 Location: Melbourne, FL Posts: 297	Re: What did you do to your Suburban Today? Over the past week... I replaced all the shocks with CPP's brand and replaced the rear lower brackets with the relocation bracket. I may replace the upper bracket too at some point, but this really helped the ride and moved the rears enough to not hit the axle. Nice to have a smoother ride. The next few days were spent moving stuff from the house into a storage unit. I probably made at least 10 trips. Nice to have the ability to haul. I took a day off and went to the Daytona Speedway for the Turkey Rod Run which fills the whole infield with classic show cars, clubs and cars/parts for sale . Nice to have a people hauler that doubles a classic show car too. I saw 5 other burbs there which is more than I've previously seen. I hope this means we're growing in popularity and price. In all, it's a fun, useful vehicle.

Register or Log In To remove these advertisements.