TX Parting out a 3/4 ton 1970 GMC super - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Oddfire · 09-26-2015, 04:39 PM

That shipping cost sounds kinda ridiculous but it is what it is. Thanks for your time but ill pass. I got one of these a while back for around $40-$45 shipped.
Jamie71

Longhorn

**68350** · 09-26-2015, 06:36 PM

Just letting ya know I got the mirrors and they worked out great! I'll let ya know when the clips arrive. Thanks!

Stokester · 09-28-2015, 02:33 AM

Where are you located? I need to come shopping.
Thx
Mike
Posted via Mobile Device

HSRACER · 09-28-2015, 11:36 AM

Quote:

Originally Posted by 68350

Just letting ya know I got the mirrors and they worked out great! I'll let ya know when the clips arrive. Thanks!

I have got them in my hand and will be mailing them out today. Can you please confirm the your address is the one in North Dakota?

HSRACER · 09-28-2015, 11:37 AM

Quote:

Originally Posted by Stokester

Where are you located? I need to come shopping.
Thx
Mike
Posted via Mobile Device

Katy, TX. If you come this week I an home Monday through Wednesday.

HSRACER · 09-28-2015, 11:38 AM

Quote:

Originally Posted by Oddfire

That shipping cost sounds kinda ridiculous but it is what it is. Thanks for your time but ill pass. I got one of these a while back for around $40-$45 shipped.
Jamie71

Longhorn

I thought so too. Oh well.

HSRACER · 09-28-2015, 11:42 AM

Quote:

Originally Posted by Stokester

Where are you located? I need to come shopping.
Thx
Mike
Posted via Mobile Device

Just to let you know, I got two more chevy long beds over the last week. Both 1971 and one has ac!

**68350** · 09-28-2015, 12:08 PM

Yes I'm one in North Dakota

Tdrcreyn4 · 09-28-2015, 12:20 PM

PM and Payment sent for toolbox cut

HSRACER · 09-28-2015, 12:32 PM

Quote:

Originally Posted by 68350

Just letting ya know I got the mirrors and they worked out great! I'll let ya know when the clips arrive. Thanks!

usps tracking number is 9500 1121 0934 5271 1200 01

Krex · 09-28-2015, 08:53 PM

Do you still have the rear axle?

HSRACER · 09-28-2015, 09:17 PM

Quote:

Originally Posted by Krex

Do you still have the rear axle?

Yes and I am coming to good guys this weekend!

HSRACER · 09-28-2015, 09:22 PM

Quote:

Originally Posted by BigRed76

Are the deluxe side markers still available? If so what condition are they in?

I now have another Cheyenne with all 4 deluxe markers. I would
Say drivers quality not show quality. 35 plus the ride. LMK

HSRACER · 09-28-2015, 09:24 PM

Quote:

Originally Posted by Tdrcreyn4

PM and Payment sent for toolbox cut

I will ship,it out tomorrow. Thanks!

Krex · 09-28-2015, 09:59 PM

Quote:

Originally Posted by HSRACER

Yes and I am coming to good guys this weekend!

Hey where is good guys?

And how much do you want for it? Also do you know the gear ratio and if it takes the 1 3/16 u joint?

HSRACER · 09-28-2015, 10:13 PM

Quote:

Originally Posted by Krex

Hey where is good guys?

And how much do you want for it? Also do you know the gear ratio and if it takes the 1 3/16 u joint?

$300, it is a dayna. I can pull the cover tomorrow and figure out the ratio. Good Guys is at Texas speedway up there Friday- Sunday.

What ratio are you looking for?

HSRACER · 09-28-2015, 10:16 PM

Quote:

Originally Posted by Krex

Hey where is good guys?

And how much do you want for it? Also do you know the gear ratio and if it takes the 1 3/16 u joint?

I don't know the joint size but the joint bolts that attach to the yoke are much larger the the normal ones on the twelve bolt rear ends I have had in the past.

Krex · 09-28-2015, 10:37 PM

Quote:

Originally Posted by HSRACER

$300, it is a dayna. I can pull the cover tomorrow and figure out the ratio. Good Guys is at Texas speedway up there Friday- Sunday.

What ratio are you looking for?

I will take it if the ratio checks out to what I have in the front. Can you pm me the details of ratio, and if it's been refreshed, brakes, bearing etc. I hoping it just install and go

HSRACER · 09-28-2015, 10:48 PM

Quote:

Originally Posted by Krex

I will take it if the ratio checks out to what I have in the front. Can you pm me the details of ratio, and if it's been refreshed, brakes, bearing etc. I hoping it just install and go

No refresh that I know about. I just got it out of the truck I am parting. Let me know if that stops your interest before I start to take it apart. I will wait for you to reply. Thanks.

HSRACER · 09-28-2015, 10:50 PM

Quote:

Originally Posted by Krex

I will take it if the ratio checks out to what I have in the front. Can you pm me the details of ratio, and if it's been refreshed, brakes, bearing etc. I hoping it just install and go

Pm me your cell so,I can text the info,to you and don't have to log in to communicate. Thanks

Drewbee · 09-29-2015, 11:34 AM

are you parting anything from the frame? I am looking for the front half of the rear spring hangers. 69-70 seem to have shorter spring hangers. I have a good set of the back half of the rear spring hangers, but the front ones I bought last year were a little bit more repair than I wanted.

HSRACER · 09-29-2015, 02:28 PM

Quote:

Originally Posted by Drewbee

are you parting anything from the frame? I am looking for the front half of the rear spring hangers. 69-70 seem to have shorter spring hangers. I have a good set of the back half of the rear spring hangers, but the front ones I bought last year were a little bit more repair than I wanted.

Sorry. I live in a pretty nice neighborhood and I can't leave the frames around long so I just take them to the scrap yard. It pains me to do that because of things like this!

HSRACER · 09-29-2015, 02:30 PM

Quote:

Originally Posted by Krex

I will take it if the ratio checks out to what I have in the front. Can you pm me the details of ratio, and if it's been refreshed, brakes, bearing etc. I hoping it just install and go

Just pulled the cover and confirmed it is a 4.10 ratio and everything looks good inside. Let me know if it will work for you.

trukman1 · 09-29-2015, 04:14 PM

Whats the status on the A/C dash?

HSRACER · 09-29-2015, 04:58 PM

Quote:

Originally Posted by trukman1

Whats the status on the A/C dash?

It is out and still available. The gentleman that was interested has now passed on it.

09-26-2015, 04:39 PM	#76
Oddfire Registered User Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: Parting out a 3/4 ton 1970 GMC super That shipping cost sounds kinda ridiculous but it is what it is. Thanks for your time but ill pass. I got one of these a while back for around $40-$45 shipped. Jamie71Longhorn

09-26-2015, 06:36 PM	#77
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Parting out a 3/4 ton 1970 GMC super Just letting ya know I got the mirrors and they worked out great! I'll let ya know when the clips arrive. Thanks! __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

09-28-2015, 12:08 PM	#83
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Parting out a 3/4 ton 1970 GMC super Yes I'm one in North Dakota __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

09-28-2015, 12:20 PM	#84
Tdrcreyn4 Registered User Join Date: Aug 2013 Location: Atlanta, GA Posts: 702	Re: Parting out a 3/4 ton 1970 GMC super PM and Payment sent for toolbox cut

09-28-2015, 08:53 PM	#86
Krex Registered User Join Date: Nov 2014 Location: Dallas Posts: 529	Re: Parting out a 3/4 ton 1970 GMC super Do you still have the rear axle?

09-28-2015, 02:33 AM	#78
Stokester Registered User Join Date: Apr 2015 Location: Katy Texas Posts: 69	Where are you located? I need to come shopping. Thx Mike Posted via Mobile Device

09-29-2015, 11:34 AM	#96
Drewbee Registered User Join Date: Dec 2011 Location: Villa Rica, GA Posts: 330	Re: Parting out a 3/4 ton 1970 GMC super are you parting anything from the frame? I am looking for the front half of the rear spring hangers. 69-70 seem to have shorter spring hangers. I have a good set of the back half of the rear spring hangers, but the front ones I bought last year were a little bit more repair than I wanted.

09-29-2015, 04:14 PM	#99
trukman1 Registered User Join Date: Apr 2001 Location: Beavercreek, Ohio 45431 Posts: 737	Re: Parting out a 3/4 ton 1970 GMC super Whats the status on the A/C dash? __________________ 1967 K30 461/TH400/Np205/D60/14FF/BDS MTZ 375/75/16 on 16x10 Pro Comps



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.