MO 1969 - 70 cab cuts and parts from part out - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

snipescastle2 · 03-07-2016, 11:24 PM

Jay,
Just read that the high note horns have an "H" with a circle around it, the lows probably have no markings

**Clatterville trolley** · 03-08-2016, 10:49 AM

Quote:

Originally Posted by snipescastle2

Jay,
I think the easiest way to check them is to jumper them on a car battery, I don't know how you would identify a low note from a high note, other than the sound,guess I need to search that, maybe by part number? Thanks!
Let me know.
Ben

That is what I figured would work, but thought maybe there was another way to identify them. I'll check it out and get back with you. Jay

snipescastle2 · 03-08-2016, 02:48 PM

Jay,
I could also use some blue or black seat belts, if you have any...all I really need are the plastic buckle covers/push buttons/springs. I can always paint to match....let me know.
Ben

**Clatterville trolley** · 03-08-2016, 03:24 PM

Quote:

Originally Posted by snipescastle2

Jay,
I could also use some blue or black seat belts, if you have any...all I really need are the plastic buckle covers/push buttons/springs. I can always paint to match....let me know.
Ben

Will check for them while I am in Centralia tomorrow too. I did find three horns, but haven't had time to test them yet. Jay

**Clatterville trolley** · 03-08-2016, 03:33 PM

Quote:

Originally Posted by chisoxhowe

Looking for this piece of the cowl. What I really need is the piece of the cab that has the hole for the wiper motor, but will take the whole section.

Ship to 60450

Attachment 1507452

I do indeed have that portion of the cowl and will cut it out for you. I think I can get it in a flat rate box of the $13.45 variety or smaller. So if you are OK with $25.50 total for everything that will work for me. PayPal is 1windyridgeboy@gmail.com
Thanks, Jay

snipescastle2 · 03-10-2016, 09:17 AM

Jay,
Any luck on the horns and seat belts?
Let me know
Ben (816)956-1202

**Clatterville trolley** · 03-10-2016, 12:00 PM

Quote:

Originally Posted by snipescastle2

Jay,
Any luck on the horns and seat belts?
Let me know
Ben (816)956-1202

Ben - looked yesterday in Centralia, but found none. Will search here at home again, I know I have some and will find them this a.m. I'm sure. Got home really late last night so today first chance to follow up. I will be in touch before the day is over. Thanks for your patience Ben. Jay

**Clatterville trolley** · 03-10-2016, 11:40 PM

Quote:

Originally Posted by Clatterville trolley

Ben - looked yesterday in Centralia, but found none. Will search here at home again, I know I have some and will find them this a.m. I'm sure. Got home really late last night so today first chance to follow up. I will be in touch before the day is over. Thanks for your patience Ben. Jay

Ben I sent you a text with photos of the seat belts I had and put in a note regarding the horns. Let me know if you didn't receive them and I will send again. Jay

stepbox · 03-10-2016, 11:55 PM

I need the floor in the cab corners for a 69,I seen in your picture of the green body they look decent

**Clatterville trolley** · 03-11-2016, 12:32 AM

Quote:

Originally Posted by stepbox

I need the floor in the cab corners for a 69,I seen in your picture of the green body they look decent

Let me get a photo or two that shows it better than the first ones in this post. Then you can tell me what parts you want or if you are still interested. Jay

stepbox · 03-11-2016, 09:25 AM

ok

twistedchevy · 03-11-2016, 10:24 PM

How much for the pass a pillar shipped to 94503

**Clatterville trolley** · 03-11-2016, 10:46 PM

Quote:

Originally Posted by Clatterville trolley

Let me get a photo or two that shows it better than the first ones in this post. Then you can tell me what parts you want or if you are still interested. Jay

Here are photos of what it looks like - let me know if it will suit your needs:

Name: DSCN1490 (2).jpg
Views: 464
Size: 66.3 KB

Name: DSCN1491 (2).jpg
Views: 482
Size: 72.7 KB

Name: DSCN1492 (2).jpg
Views: 472
Size: 71.3 KB

Name: DSCN1493 (2).jpg
Views: 476
Size: 71.1 KB

Name: DSCN1494 (2).jpg
Views: 468
Size: 80.1 KB

**Clatterville trolley** · 03-11-2016, 10:49 PM

More:

Name: DSCN1496 (2).jpg
Views: 322
Size: 74.4 KB

**Clatterville trolley** · 03-11-2016, 11:01 PM

Quote:

Originally Posted by twistedchevy

How much for the pass a pillar shipped to 94503

Are you asking about this piece only on the other side (passenger side)?

Name: DSCN1511 (1).jpg
Views: 227
Size: 36.3 KB

Let me know if it is because I do still have that piece. and can price it when I find out if we are thinking about the same piece. Jay

stepbox · 03-12-2016, 09:52 AM

Quote:

Originally Posted by Clatterville trolley

Here are photos of what it looks like - let me know if it will suit your needs:

Attachment 1509135

Attachment 1509136

Attachment 1509137

Attachment 1509138

Attachment 1509139

The passenger side looks decent ,How much to cut that corner from the cab mount out.
Also wondered if you have any step box fenders you can cut up.

**Clatterville trolley** · 03-12-2016, 12:46 PM

Quote:

Originally Posted by stepbox

The passenger side looks decent ,How much to cut that corner from the cab mount out.
Also wondered if you have any step box fenders you can cut up.

$30 and shipping - what is your zip code? Also, don't have any more step side fenders right now. I have some good steps and brackets though if you need those. Jay

stepbox · 03-12-2016, 01:13 PM

Quote:

Originally Posted by Clatterville trolley

$30 and shipping - what is your zip code? Also, don't have any more step side fenders right now. I have some good steps and brackets though if you need those. Jay

Thanks Jay,I've been under the cab this morning and I found some other issues,so I'm going to pass for now.Keep me in mind on the fendaers
Menno

**Clatterville trolley** · 03-12-2016, 01:21 PM

Quote:

Originally Posted by stepbox

Thanks Jay,I've been under the cab this morning and I found some other issues,so I'm going to pass for now.Keep me in mind on the fendaers
Menno

Not a problem Menno. If there are enough bad places in the entire floor it might make more sense dollar wise to get one of the new complete floor pans with all supports pre-welded in to replace old one. I have a good friend that used one on a 67 recently and said it went in very well. Just a thought, Jay

**Clatterville trolley** · 03-23-2016, 11:01 AM

Time for a little bump.

**Clatterville trolley** · 03-29-2016, 10:00 AM

Mid week bump.

snipescastle2 · 03-29-2016, 02:05 PM

Jay,
Haven't forgot you, just haven't been able to get to the post office. I'll get that out this week for sure.
Ben

**Clatterville trolley** · 03-29-2016, 03:02 PM

Quote:

Originally Posted by snipescastle2

Jay,
Haven't forgot you, just haven't been able to get to the post office. I'll get that out this week for sure.
Ben

Sounds to me like your boss should go for you - they are the reason you can't get there.

riddinlow99 · 03-29-2016, 03:47 PM

if the floor is not sold how much is it that's way better than mine

**Clatterville trolley** · 03-29-2016, 04:26 PM

Quote:

Originally Posted by riddinlow99

if the floor is not sold how much is it that's way better than mine

I do still have it and I would take $80.00 plus shipping to you. I'm not sure how would be least expensive way to ship, or what shipping place would handle it - but surely someone would. Jay

03-07-2016, 11:24 PM	#76
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: 1969 - 70 cab cuts and parts from part out Jay, Just read that the high note horns have an "H" with a circle around it, the lows probably have no markings Attached Images

03-08-2016, 02:48 PM	#78
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: 1969 - 70 cab cuts and parts from part out Jay, I could also use some blue or black seat belts, if you have any...all I really need are the plastic buckle covers/push buttons/springs. I can always paint to match....let me know. Ben

03-10-2016, 09:17 AM	#81
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: 1969 - 70 cab cuts and parts from part out Jay, Any luck on the horns and seat belts? Let me know Ben (816)956-1202

03-10-2016, 11:55 PM	#84
stepbox Registered User Join Date: Dec 2015 Location: Grand Rapids Mich. Posts: 50	Re: 1969 - 70 cab cuts and parts from part out I need the floor in the cab corners for a 69,I seen in your picture of the green body they look decent

03-11-2016, 09:25 AM	#86
stepbox Registered User Join Date: Dec 2015 Location: Grand Rapids Mich. Posts: 50	Re: 1969 - 70 cab cuts and parts from part out ok

03-11-2016, 10:24 PM	#87
twistedchevy Registered User Join Date: Jan 2015 Location: napa, ca Posts: 249	Re: 1969 - 70 cab cuts and parts from part out How much for the pass a pillar shipped to 94503 __________________ Mine: 72 c20 Chevy suburban, 02 5.3 w/4l60e , factory ac and 50gal tank. 70 k10 Chevy burb, 04 5.3 w/4l60e np241, with dual 30gal saddle tanks and rear 30 gal tank Dads: 67 c10 step side(project) 72 c10 GMC burb 350/400, with 67 Chevy front clip(grocery getter) Ours: 67 c30 tow truck 70 c10 long bed 383stroker w/digital gauges(work truck)

03-11-2016, 10:49 PM	#89
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,934	Re: 1969 - 70 cab cuts and parts from part out More:

03-23-2016, 11:01 AM	#95
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,934	Re: 1969 - 70 cab cuts and parts from part out Time for a little bump.

03-29-2016, 10:00 AM	#96
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,934	Re: 1969 - 70 cab cuts and parts from part out Mid week bump.

03-29-2016, 02:05 PM	#97
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: 1969 - 70 cab cuts and parts from part out Jay, Haven't forgot you, just haven't been able to get to the post office. I'll get that out this week for sure. Ben __________________ "Persistence is the twin sister of Excellence.one is a matter of quality,the other, a matter of time" “Serious Black” my 1971 Short Bed Fleetside Sold to an outstanding man in Lees Summit,Mo. “Gone, but by no means,Forgotten”

03-29-2016, 03:47 PM	#99
riddinlow99 Registered User Join Date: Jan 2016 Location: Wisconsin Rapids WI Posts: 37	Re: 1969 - 70 cab cuts and parts from part out if the floor is not sold how much is it that's way better than mine



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.