OR 67-72 cross members

[Grumpy old man]

HI, I'm looking for a '67 short bed manual trans cross member .and the rear most frame cross member with light wiring hole shipped to 37820 the ones I have are bent and pitted .

[WarMonger]

Originally Posted by WarMonger

Need another crossmember. Rear upper coil spring perch/shock mount. This is going on a 72 blazer that I'm converting to trailing arms.

Shipped to 93001

[DLTruck1973]

Originally Posted by WarMonger

I received my part a few days ago. That thing looks brand new. I can't thank you enough.

Thank you. Glad you are happy,

Thomas

[DLTruck1973]

Originally Posted by jimer1964

I also received my parts! Thinking the same! Looking Brand New! Thank You!

Thank you very much. Glad you are happy.

Thomas

[DLTruck1973]

Originally Posted by BigMike

How about the wood floor bed brackets? I am going to convert from steel floor to wood. Shipping to 92688

Thanks

Are you talking about the brackets that rivet to the frame? If so, those are the same on a steel floor. It would be the cross sills that you need for the conversion. I do not have any cross sills for a wood floor at this time.

Let me know if I am not understanding your request.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by Grumpy old man

HI, I'm looking for a '67 short bed manual trans cross member .and the rear most frame cross member with light wiring hole shipped to 37820 the ones I have are bent and pitted .

Manual trans cross member for a V8 truck 2wd?

Let me know. I have them for a V8.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by WarMonger

Shipped to 93001

Coil spring shock cross member for a 2wd pick up, I have it. I do not have the upper spring plates at this time.

Give me some time and I will get you a quote. Very busy now.

Thank you,
Thomas

[Grumpy old man]

Originally Posted by DLTruck1973

Manual trans cross member for a V8 truck 2wd?

Let me know. I have them for a V8.

Thank you,
Thomas

1967 250 ci 2wd 3 speed manual trans cross member with the stock bell housing mounts

[DLTruck1973]

Originally Posted by Grumpy old man

1967 250 ci 2wd 3 speed manual trans cross member with the stock bell housing mounts

Sorry, nothing for a 6 at this time. They are different than a V8 because of position in the frame rails.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by Grumpy old man

1967 250 ci 2wd 3 speed manual trans cross member with the stock bell housing mounts

Can you post a picture of the rear tail light harness cross member from the top view. There are two different styles of these cross members. One has staggered rivet holes and one has straight6 across rivet holes. I need to know to get you the correct part. I have both.

Thank you,
Thomas

[WarMonger]

Originally Posted by DLTruck1973

Coil spring shock cross member for a 2wd pick up, I have it. I do not have the upper spring plates at this time.

Give me some time and I will get you a quote. Very busy now.

Thank you,
Thomas

How much for the coil spring shock cross member shipped to 93001?

[BigMike]

No you didn't read it wrong. I need the cross sills

Thanks anyways

Originally Posted by DLTruck1973

Are you talking about the brackets that rivet to the frame? If so, those are the same on a steel floor. It would be the cross sills that you need for the conversion. I do not have any cross sills for a wood floor at this time.

Let me know if I am not understanding your request.

Thank you,
Thomas

[WarMonger]

Originally Posted by WarMonger

How much for the coil spring shock cross member shipped to 93001?

Anything on this yet? thanks

[DLTruck1973]

Originally Posted by WarMonger

Anything on this yet? thanks

$65.00 shipped to your door.

Let me know and I will PM you payment information if needed.

Sorry for the delay,

Thomas

[WarMonger]

Originally Posted by DLTruck1973

$65.00 shipped to your door.

Let me know and I will PM you payment information if needed.

Sorry for the delay,

Thomas

Sounds good. Lets do it.

[DLTruck1973]

Originally Posted by WarMonger

Sounds good. Lets do it.

PM on the way,

Thank you,
Thomas

[WarMonger]

Thanks Thomas, you are the best.

[DLTruck1973]

Originally Posted by WarMonger

Thanks Thomas, you are the best.

Glad to help. Let me know if you need anything else. Upper spring plates are hard to find nice but I do get them from time to time.

Thank you again,
Thomas

[WarMonger]

Originally Posted by DLTruck1973

Glad to help. Let me know if you need anything else. Upper spring plates are hard to find nice but I do get them from time to time.

Thank you again,
Thomas

received my Crossmember yesterday. Looks great and super fast shipping. Let me know if you get more upper spring plates. I need a set.

Thanks

[DLTruck1973]

Originally Posted by WarMonger

received my Crossmember yesterday. Looks great and super fast shipping. Let me know if you get more upper spring plates. I need a set.

Thanks

Glad to hear. I will post upper spring plates when they become available. They are a hot item and hard to get in nice shape.

Thank you,
Thomas

[WarMonger]

Originally Posted by DLTruck1973

Glad to hear. I will post upper spring plates when they become available. They are a hot item and hard to get in nice shape.

Thank you,
Thomas

Any upper spring plates show up yet?

Thanks

[DLTruck1973]

Originally Posted by WarMonger

Any upper spring plates show up yet?

Thanks

No sir. It will be some time before I have another set. That is not a guarantee that they will be good ones when I do get a truck with them to part.

I will keep you posted if anything changes.

Thank you,
Thomas

[givememytoys]

Do you have a rear motor/trans cross member for a 1970 c10 to mount a SM465?

[DLTruck1973]

Originally Posted by givememytoys

Do you have a rear motor/trans cross member for a 1970 c10 to mount a SM465?

What you are looking for is the trans cross member that runs under the bell housing and has 2 mounts that bolt to the bell housing. I have one for a V8 manual trans.

Price is $40.00 plus the shipping. I will need your zip code for a ship quote.

Thank you,
Thomas

[givememytoys]

Originally Posted by DLTruck1973

What you are looking for is the trans cross member that runs under the bell housing and has 2 mounts that bolt to the bell housing. I have one for a V8 manual trans.

Price is $40.00 plus the shipping. I will need your zip code for a ship quote.

Thank you,
Thomas

I have a 292 six are the 6/8 the same?