PA So 1 more 72 blazer going under the knife - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1rippen6** · 03-05-2016, 11:18 PM

Quote:

Originally Posted by Tumbleweed1C4

The one on the column, did not see the one on the floor. Hoping for a decent sandalwood.

LOL maybe I took it out before the pictures the one on the column is trashed large cracks and chunks missing sorry

Tumbleweed1C4 · 03-05-2016, 11:25 PM

I figured. It was a good bet, but you never know. They are like unicorns.

Tumbleweed1C4 · 03-06-2016, 11:50 AM

I am beginning to resign myself to buying another one and painting it. What kind of shape is the black one in you mentioned?

**1rippen6** · 03-06-2016, 02:28 PM

Quote:

Originally Posted by Tumbleweed1C4

I am beginning to resign myself to buying another one and painting it. What kind of shape is the black one in you mentioned?

I will look it over good and get some pictures

**1rippen6** · 03-06-2016, 02:30 PM

Quote:

Originally Posted by k5blazin

Yes shoot me a couple of pics please .shipping to 13676. Thanks

Looks like shipping is 35 not broke tabs just a little dirty should clean up fine let me know if still interested.

**1rippen6** · 03-06-2016, 03:15 PM

Both are in about the same condition 40 plus shipping for either one. First one does need a good cleaning

**1rippen6** · 03-06-2016, 03:18 PM

Second one they both need a good cleaning LOL

**k5blazin** · 03-06-2016, 03:44 PM

Quote:

Originally Posted by 1rippen6

Looks like shipping is 35 not broke tabs just a little dirty should clean up fine let me know if still interested.

Thanks for the pics! Could you do 150$ shipped?

**1rippen6** · 03-06-2016, 06:38 PM

Quote:

Originally Posted by k5blazin

Thanks for the pics! Could you do 150$ shipped?

I can do that as long as you take care of PP fees let me know..

**k5blazin** · 03-06-2016, 07:03 PM

Quote:

Originally Posted by 1rippen6

I can do that as long as you take care of PP fees let me know..

Sounds good ill take it send me a total. Pm sent

Tumbleweed1C4 · 03-06-2016, 08:56 PM

I'll go ahead and take both wheels. It will give me a chance to practice some crack repair and see how the painting goes. Just confirm for me the backside around the hubs are ok. Shipping to 49735.

flashed · 03-06-2016, 09:42 PM

Dwayne ,
Payment will be in the mail first thing in the morning for the emblems .
Thanks
John

I have enclosed a card with my name and address .

**1rippen6** · 03-07-2016, 08:30 AM

Quote:

Originally Posted by Tumbleweed1C4

I'll go ahead and take both wheels. It will give me a chance to practice some crack repair and see how the painting goes. Just confirm for me the backside around the hubs are ok. Shipping to 49735.

Sorry I will need one for a project I have but both are in the same condition so I figured I would let you pick the one you want. I can get you pictures of both bases tonight with a shipping quote.

**1rippen6** · 03-07-2016, 08:31 AM

Quote:

Originally Posted by flashed

Dwayne ,
Payment will be in the mail first thing in the morning for the emblems .
Thanks
John

I have enclosed a card with my name and address .

Sounds good thanks

**1rippen6** · 03-07-2016, 10:47 AM

Quote:

Originally Posted by 1972 Jimmy

Dwayne,
What shape is the gas tank mounting hardware in?? (U Bolts, Brakets and straps) Also, Would you be willing to cut off the gas tank filler neck?
Thanks,
Eric

I waited long enough he didn't response so I will drop the tank this week and get you some pictures.

1972 Jimmy · 03-07-2016, 01:38 PM

Quote:

Originally Posted by 1rippen6

I waited long enough he didn't response so I will drop the tank this week and get you some pictures.

Lol! Sounds good!
Lmk,
Eric

Tumbleweed1C4 · 03-07-2016, 10:05 PM

Quote:

Originally Posted by 1rippen6

Sorry I will need one for a project I have but both are in the same condition so I figured I would let you pick the one you want. I can get you pictures of both bases tonight with a shipping quote.

OK, thanks. Could you also take another picture of wheel #1, the whole thing from front? That pic was kind of washed out on right side.

**1rippen6** · 03-07-2016, 10:15 PM

Quote:

Originally Posted by Tumbleweed1C4

OK, thanks. Could you also take another picture of wheel #1, the whole thing from front? That pic was kind of washed out on right side.

Yep just got in will take some tomorrow sorry for the delay

canter66 · 03-07-2016, 10:41 PM

Do you have any hatch latches? If so can I get a pic and how much? Just looking for the driver side.

**1rippen6** · 03-08-2016, 08:29 AM

Quote:

Originally Posted by canter66

Do you have any hatch latches? If so can I get a pic and how much? Just looking for the driver side.

I will check and let you know this evening

**1rippen6** · 03-08-2016, 10:41 PM

Quote:

Originally Posted by Tumbleweed1C4

OK, thanks. Could you also take another picture of wheel #1, the whole thing from front? That pic was kind of washed out on right side.

number 1

**1rippen6** · 03-08-2016, 10:42 PM

number 2

**1rippen6** · 03-08-2016, 10:52 PM

Quote:

Originally Posted by 1972 Jimmy

Dwayne,
What shape is the gas tank mounting hardware in?? (U Bolts, Brakets and straps) Also, Would you be willing to cut off the gas tank filler neck?
Thanks,
Eric

Dropped the tank tonight it was missing one of the spacer but I have one from the other blazer I'm parting (I'm assuming that is what you are calling the bracket). U bolt looks to be correct it was bolted on both sides of the strap so I didn't get the other set off yet will do that tomorrow I've been real busy sorry for the delay.I have 2 sets of straps so I'm sure I can find a decent set out of the 4. I'm assuming you need the little square plates that go on before the nuts but after the straps also is that correct. Tank neck looks nice I normally get 50 for a good used tank so if you want the neck for 50 I will cut it off. I will get you pictures of everything tomorrow. I do have a neck from a toasted tank but the neck is no good either may be able to use it as a pattern I will give it to you if you want to pay shipping up to you. I was thinking of trying to have someone make them to sale but have to much on my plate to worry about it. LOL

**1rippen6** · 03-08-2016, 10:57 PM

Quote:

Originally Posted by richard2717

How is the rear floor around the wheel tubs, any rust thru? I need about 4-6" past the tubs on both sides for one of my projects and at least one more tub.

Haven't forgot about you should get that far this weekend hopefully. I see in another thread you were asking about a set of buddy buckets. I have a buddy that has a set out of a 68 suburban that he wants to sell for 250 if interested I can get some pictures. Bonus is you wouldn't have to pay for shipping I can deliver this spring!! Same guy wanting the softray glass

blap · 03-08-2016, 11:10 PM

What is the gear ratio in the diffs?

03-05-2016, 11:25 PM	#77
Tumbleweed1C4 Registered User Join Date: Jan 2014 Location: Gaylord, Michigan Posts: 127	Re: So 1 more 72 blazer going under the knife I figured. It was a good bet, but you never know. They are like unicorns. __________________ Sleep safe in your beds because rough men stand ready in the night to visit violence on those who would do you harm 72 K5 Blazer 72 K10 SWB (in pieces under slow construction!) 72 K20

03-06-2016, 11:50 AM	#78
Tumbleweed1C4 Registered User Join Date: Jan 2014 Location: Gaylord, Michigan Posts: 127	Re: So 1 more 72 blazer going under the knife I am beginning to resign myself to buying another one and painting it. What kind of shape is the black one in you mentioned? __________________ Sleep safe in your beds because rough men stand ready in the night to visit violence on those who would do you harm 72 K5 Blazer 72 K10 SWB (in pieces under slow construction!) 72 K20

03-06-2016, 03:15 PM	#81
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: So 1 more 72 blazer going under the knife Both are in about the same condition 40 plus shipping for either one. First one does need a good cleaning Attached Images

03-06-2016, 03:18 PM	#82
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: So 1 more 72 blazer going under the knife Second one they both need a good cleaning LOL Attached Images

03-06-2016, 08:56 PM	#86
Tumbleweed1C4 Registered User Join Date: Jan 2014 Location: Gaylord, Michigan Posts: 127	Re: So 1 more 72 blazer going under the knife I'll go ahead and take both wheels. It will give me a chance to practice some crack repair and see how the painting goes. Just confirm for me the backside around the hubs are ok. Shipping to 49735. __________________ Sleep safe in your beds because rough men stand ready in the night to visit violence on those who would do you harm 72 K5 Blazer 72 K10 SWB (in pieces under slow construction!) 72 K20

03-06-2016, 09:42 PM	#87
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: So 1 more 72 blazer going under the knife Dwayne , Payment will be in the mail first thing in the morning for the emblems . Thanks John I have enclosed a card with my name and address .

03-07-2016, 10:41 PM	#94
canter66 Registered User Join Date: Nov 2015 Location: San Diego, California Posts: 33	Re: So 1 more 72 blazer going under the knife Do you have any hatch latches? If so can I get a pic and how much? Just looking for the driver side.

03-08-2016, 10:42 PM	#97
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: So 1 more 72 blazer going under the knife number 2 Attached Images

03-08-2016, 11:10 PM	#100
blap Registered User Join Date: Nov 2008 Location: bristol,CT Posts: 580	Re: So 1 more 72 blazer going under the knife What is the gear ratio in the diffs?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.