MD 72 suburban sheetmetal - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Heliarcn · 04-11-2017, 10:17 AM

Did you decide to keep the frame, or will you be parting it out as well? Im looking for the body mount in front of the drivers rear wheel. Let me know if you can help with this.

Thanks,

**Hart_Rod** · 04-11-2017, 10:51 AM

Do you take a picture from the backside of where this arrow is pointing?

**richard2717** · 04-11-2017, 07:52 PM

Quote:

Originally Posted by Heliarcn

Did you decide to keep the frame, or will you be parting it out as well? Im looking for the body mount in front of the drivers rear wheel. Let me know if you can help with this.

Thanks,

I am going to go ahead and cut this one up. all mounts will be $25 plus shipping. It will probably be Sunday before I can start tearing it down.

**richard2717** · 04-11-2017, 07:54 PM

Quote:

Originally Posted by Hart_Rod

Do you take a picture from the backside of where this arrow is pointing?

Rob
Haven't forgotten you, My work season has busted wide open and I have yet to touch base with the man I am getting the other two from. I hope to get that moving on Thursday. as soon as I get one here I will see about getting the picture for you

thanks
Richard

**Hart_Rod** · 04-12-2017, 08:37 AM

Quote:

Originally Posted by richard2717

Rob
Haven't forgotten you, My work season has busted wide open and I have yet to touch base with the man I am getting the other two from. I hope to get that moving on Thursday. as soon as I get one here I will see about getting the picture for you

thanks
Richard

Thanks Richard!

Heliarcn · 04-12-2017, 10:38 AM

Quote:

Originally Posted by richard2717

I am going to go ahead and cut this one up. all mounts will be $25 plus shipping. It will probably be Sunday before I can start tearing it down.

Thanks Richard. I'll try to get a picture of the mount I need just to confirm.

**richard2717** · 04-14-2017, 09:44 PM

Quote:

Originally Posted by Heliarcn

Thanks Richard. I'll try to get a picture of the mount I need just to confirm.

I took pictures of the frame today. I believe picture #1 is what you are asking about?

.

**richard2717** · 04-14-2017, 09:46 PM

6-10

.

**richard2717** · 04-14-2017, 09:48 PM

Also have the hitch that was welded on. I had to cut the angle iron but I was able to cut the welds loose on the flat bar.

.

Heliarcn · 04-15-2017, 01:16 AM

Quote:

Originally Posted by richard2717

I took pictures of the frame today. I believe picture #1 is what you are asking about?

.

Yes, that's the mount I'm looking for.

*randy500* · 04-15-2017, 11:44 AM

I cant remember if that truck was big block or not. I need the tailpipe hanger behind the wheel left and right, I didn't see a picture of the RH side. Do you have both sides and how much shipped to 98409.
Did you find a drivers side front glass for a suburban yet?

**richard2717** · 04-15-2017, 11:57 AM

Randy
3rd pic down on one's I posted yesterday show the rear exhaust bracket that is on the driver's side. I think this one was small block. I still have not been able to clear my schedule enough to go get the other two burbs but I think one is soft ray

**richard2717** · 04-15-2017, 12:04 PM

Quote:

Originally Posted by Heliarcn

Yes, that's the mount I'm looking for.

I got the mount off this morning and hit it a little in the cabinet. There is some faint pitting on the top outer edge but other than that the undercoating on this rig saved it. The really rough part you see in the 1st pic is undercoating not rust or pitting

$40 shipped

.

*randy500* · 04-15-2017, 01:29 PM

Quote:

Originally Posted by richard2717

Randy
3rd pic down on one's I posted yesterday show the rear exhaust bracket that is on the driver's side. I think this one was small block. I still have not been able to clear my schedule enough to go get the other two burbs but I think one is soft ray

Let me know what you want for the one hangar, I might need the hangar over the rear end too. And let me know on the glass when you get it.

Heliarcn · 04-15-2017, 10:33 PM

Quote:

Originally Posted by richard2717

I got the mount off this morning and hit it a little in the cabinet. There is some faint pitting on the top outer edge but other than that the undercoating on this rig saved it. The really rough part you see in the 1st pic is undercoating not rust or pitting

$40 shipped

.

PM Sent

magntik · 04-19-2017, 02:37 PM

I'm looking for part of the rear inner wheel well that extends down and seals off the quarter. On the front side.
If any of that description makes sense. It's almost wedge shaped.
I'd buy both sides driver and passenger
Jeremy.

**richard2717** · 04-19-2017, 02:58 PM

Quote:

Originally Posted by magntik

I'm looking for part of the rear inner wheel well that extends down and seals off the quarter. On the front side.
If any of that description makes sense. It's almost wedge shaped.
I'd buy both sides driver and passenger
Jeremy.

Nothing below the bottom moldings is good enough to use on this one. Sorry

Rust hole · 05-07-2017, 01:51 PM

looking for inner fenders for the rear cargo area. Do you still have them? if so how much shipped to 32092?

thanks, Damon

**richard2717** · 05-07-2017, 02:11 PM

Quote:

Originally Posted by Rust hole

looking for inner fenders for the rear cargo area. Do you still have them? if so how much shipped to 32092?

thanks, Damon

Damon,
I would still have to cut them off of the quarters but will sell them separate. I will take $75 for the pair of them plus shipping. UPS calculator is saying $35 to ship but I would need your complete shipping address to get accurate quote. I have yet to have the online calculator be accurate. If you want to PM your address I can get exact cost.

thanks
Richard

**richard2717** · 05-07-2017, 03:37 PM

Here is a pic of where I will cut them

.

Rust hole · 05-07-2017, 04:17 PM

Quote:

Originally Posted by richard2717

Here is a pic of where I will cut them

.

I will need all the way to the outer skin. If your willing to sell them with the outer skin attached I will do the grunt work. Mine are completely gone right now. the PO drilled the spot welds and gutted them.

Thanks, Damon

**richard2717** · 05-07-2017, 04:23 PM

Quote:

Originally Posted by Rust hole

I will need all the way to the outer skin. If your willing to sell them with the outer skin attached I will do the grunt work. Mine are completely gone right now. the PO drilled the spot welds and gutted them.

Thanks, Damon

I am headed out to dinner but I will take a look when I get back to see whats involved.

thanks
Richard

Rust hole · 05-07-2017, 04:43 PM

Ok. Thanks for looking and the help. I'm trying to post pics. We will see if it works.

**richard2717** · 05-07-2017, 07:08 PM

here is pic of the small rust hole on the pass side. driver side looks ok.

.

**richard2717** · 05-07-2017, 08:46 PM

Both rear inner wheel tubs sold to Rust Hole

04-11-2017, 10:17 AM	#76
Heliarcn Registered User Join Date: Nov 2013 Location: Las Vegas, Nevada Posts: 376	Re: 72 suburban sheetmetal Did you decide to keep the frame, or will you be parting it out as well? Im looking for the body mount in front of the drivers rear wheel. Let me know if you can help with this. Thanks, __________________ Bret 1972 Chevy Suburban 1976 Blazer

04-11-2017, 10:51 AM	#77
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: 72 suburban sheetmetal Do you take a picture from the backside of where this arrow is pointing? Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-14-2017, 09:46 PM	#83
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal 6-10 . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

04-14-2017, 09:48 PM	#84
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal Also have the hitch that was welded on. I had to cut the angle iron but I was able to cut the welds loose on the flat bar. . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

04-15-2017, 11:44 AM	#86
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 72 suburban sheetmetal I cant remember if that truck was big block or not. I need the tailpipe hanger behind the wheel left and right, I didn't see a picture of the RH side. Do you have both sides and how much shipped to 98409. Did you find a drivers side front glass for a suburban yet?

04-15-2017, 11:57 AM	#87
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal Randy 3rd pic down on one's I posted yesterday show the rear exhaust bracket that is on the driver's side. I think this one was small block. I still have not been able to clear my schedule enough to go get the other two burbs but I think one is soft ray __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

04-19-2017, 02:37 PM	#91
magntik Registered User Join Date: Oct 2005 Location: Iowa Posts: 67	Re: 72 suburban sheetmetal I'm looking for part of the rear inner wheel well that extends down and seals off the quarter. On the front side. If any of that description makes sense. It's almost wedge shaped. I'd buy both sides driver and passenger Jeremy.

05-07-2017, 01:51 PM	#93
Rust hole Registered User Join Date: Mar 2013 Location: St. Augustine, Fl Posts: 59	Re: 72 suburban sheetmetal looking for inner fenders for the rear cargo area. Do you still have them? if so how much shipped to 32092? thanks, Damon

05-07-2017, 03:37 PM	#95
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal Here is a pic of where I will cut them . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

05-07-2017, 04:43 PM	#98
Rust hole Registered User Join Date: Mar 2013 Location: St. Augustine, Fl Posts: 59	Re: 72 suburban sheetmetal Ok. Thanks for looking and the help. I'm trying to post pics. We will see if it works. Attached Images

05-07-2017, 07:08 PM	#99
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal here is pic of the small rust hole on the pass side. driver side looks ok. . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

05-07-2017, 08:46 PM	#100
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: 72 suburban sheetmetal Both rear inner wheel tubs sold to Rust Hole __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.