MD Parting 72 burb

[magntik]

Is #9 still available??
Shipping to 52404

Thanks,
Jeremy

[richard2717]

Originally Posted by magntik

Is #9 still available??
Shipping to 52404

Thanks,
Jeremy

Yes it is still available. It just barely does not fit in a small flat rate (it will but the plastic dome would probably arrive damaged. Figure $10 shipping so total would be $45. If you want it, my PP link is in my signature below.

thanks
Richard

[Number98]

Originally Posted by richard2717

It is in nice shape other than the feet would need rechromed to be great. I don't have my heart in to selling it yet which is why it was not listed. I am looking in to getting the feet rechromed 1st before I decide what happens to it. If I do decide to let it go I will put it in its own ad since this one has so much stuff in it now.

Thanks
Richard

Have you put any more thought into the rack? I am still interested so I wanted to check in again.

[Getter-Done]

Hey Richard
I am in no hurry for these parts.
With this cold weather I won't be in the shop for long at a time.
If you have #22 and #23 and # 24 still available I would like to get price + shipping (I bought some(Nice) mirrors from you) in the past.
I will probably need a Roof Rib or 2 in the future and also a few more body cut from a suburban if you have them available.

[richard2717]

Originally Posted by Number98

Have you put any more thought into the rack? I am still interested so I wanted to check in again.

I have sent the stands off to be rechromed and I have been working on buffing out the rest of the pcs. I am going to wait to see what the stand turn out like before deciding. The other pcs are buffing up really nice. I have a panel truck and 2 blazer projects that I was thinking of using it on one of them, but still up in the air at this point.

Richard

[richard2717]

Originally Posted by Getter-Done

Hey Richard
I am in no hurry for these parts.
With this cold weather I won't be in the shop for long at a time.
If you have #22 and #23 and # 24 still available I would like to get price + shipping (I bought some(Nice) mirrors from you) in the past.
I will probably need a Roof Rib or 2 in the future and also a few more body cut from a suburban if you have them available.

I do still have them (x2) Let me know what body cuts you need and I can let you know on that as well. Are you talking about the steel roof ribs or the plastic headliner ribs? Have several steel but no plastic at the moment. We got 8'' or so of snow overnight and it not supposed to stop until late this afternoon so may be some delay on my end.

Richard

[Getter-Done]

Richard
I would like 2 metal roof ribs. 2 sets of 3rd door hinges. 2 B-pillars and 2 striker plates. The body cut I would like is the section above the front door (the 90 degree angle) on both sides. Yes I was watching the snow storm ya'll got on the news. That's a lot of Snow.
No hurry on my part. My heat is out and wife is in hospital.
Do you still have my address for a shipping quote?
Thanks
Dwayne

[richard2717]

Dwayne,
I don't still have your address. PM when you get a chance. No rush.

If you are talking about the front corner that I have marked in red box, I think they are rotten on both rigs on the passenger side. DS might be good but will have to look. I will get pulling everything else and let you know as soon as the storm is out of here.
thanks
Richard

Hope all is ok with your wife and you get heat back. I just got mine going again yesterday but cracked a water pipe in the process. Luckily I have what i need here to fix it today. Not been a good start to the year here.

[richard2717]

should have posted the pic I guess


.

[Maggro]

Did you have any luck finding a passenger side 3rd door window regulator.

[richard2717]

Originally Posted by Maggro

Did you have any luck finding a passenger side 3rd door window regulator.

The green burb in the pic above is a 72 and I am reasonably sure it was good. I have been trying to keep everything in operating order here with the bad weather we have been having and have not had a chance to go pull it yet to make sure everything is good on the rollers. I think the red door on the white 69 was also a 72 door as well. When the show lets up some I will check . Send me a reminder in a day or so if you have not heard back. It has not been a great start to the new year for me and may slip my mind

thanks
Richard

[Maggro]

Thanks for the reply, I forgot about your side of the country getting hammered with bad weather. No real rush, will touch base with you in a few days.
Thanks, Mondo

[Getter-Done]

Originally Posted by richard2717

Dwayne,
I don't still have your address. PM when you get a chance. No rush.

If you are talking about the front corner that I have marked in red box, I think they are rotten on both rigs on the passenger side. DS might be good but will have to look. I will get pulling everything else and let you know as soon as the storm is out of here.
thanks
Richard

Hope all is ok with your wife and you get heat back. I just got mine going again yesterday but cracked a water pipe in the process. Luckily I have what i need here to fix it today. Not been a good start to the year here.

Richard
The cut I need is not the one circled in the Picture . I would like the one in between the two doors on the top of the B-pillar.
After studying the picture it may have added A-Lot more to my list. (LOL)
First off /Do you ship by Fast en Al?
I called my local Fast en Al . They said they could bring the stuff to me if you do. This will be the first time dealing with them on shipping. The guy said for me to call and he would give me a Phone no. to call.

Here goes with my list to see what you still have and a price.
Metal headliner roof ribs (Qty 2)
#21= 3rd door (Qty 2)
#22=3rd door hinges (Qty 2)
#23=B-pillar (Qty 2) (ALSO) the 90 degree to each side @the top (Qty 2)
#24=striker (Qty 2)
Front Doors for Suburban (R&L) 1 each.

I am building a C rew c ab . If you do not have some-what decent front doors or third doors I could probably get by with the Frame that the window goes in ( and the glass).
I have at-least 10 (not the best in the world) regular truck doors to work with in this build.

Hope you got your water going.
My wife is a little better and I will fix the heat next week when it warms up.
Thanks
Dwayne

[71blksuper4x4]

Richard, I am needing a piece cut out of the false door. I am looking for a good top window weatherstrip area of the outer sheet metal. I cut mine out to save it for my fourth door, but it has since been misplaced. I'll get a pic of what I am needing. Thanks Trevor

[71blksuper4x4]

Pretty much the area circle. Cut just below the first body line from the window is fine.

[richard2717]

Sorry for the slow response guys. We got hammered with snow last week, I spent 2 days on the bobcat plowing and have been in bed sick since then. Give me another day or two to get back to as normal as I can be and I will get working on this. Pretty sure i can help you all out.

Thanks
Richard

[Getter-Done]

Originally Posted by richard2717

Sorry for the slow response guys. We got hammered with snow last week, I spent 2 days on the bobcat plowing and have been in bed sick since then. Give me another day or two to get back to as normal as I can be and I will get working on this. Pretty sure i can help you all out.

Thanks
Richard

Richard
I am in no hurry
No problem
Hope you get to feeling better
Thanks
Dwayne

[richard2717]

Originally Posted by 71blksuper4x4

Richard, I am needing a piece cut out of the false door. I am looking for a good top window weatherstrip area of the outer sheet metal. I cut mine out to save it for my fourth door, but it has since been misplaced. I'll get a pic of what I am needing. Thanks Trevor

Trevor,
I have this panel already out to be cut from a previous dismantle. Everything in the red sq. would be $40 shipped. If you need it different just let me know. If you want it, my PP is in my signature.

Thanks
Richard


.

[richard2717]

pics for un4gvn!


.

[71blksuper4x4]

Hey Richard, can you tell me if the top rail has any shape into it around where the small rear door window goes? It seems as though that is why I cut it out to begin with. I am needing something to look like this welded in piece. I am pretty sure that area has that. Thanks Trevor

[richard2717]

Trevor,
Here is a down shot. does not appear to be anything missing.


Richard

[71blksuper4x4]

Perfect! Paypal sent Richard. Much appreciated. Trevor

[richard2717]

Originally Posted by 71blksuper4x4

Perfect! Paypal sent Richard. Much appreciated. Trevor

I will get it cut tomorrow so i can get it sent out Monday morning.

Thnaks
Richard

[1fast10]

How are the roof corners above the rear hatch/barn doors.mine is bubbling up between window and drip rail

[dmccay0878]

How much for everything in picture shipped to 19007