![]() |
![]() |
#976 |
Registered User
Join Date: Mar 2010
Location: Cumming, GA
Posts: 108
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Rev wheels are just licensed by AR not made by them, big difference
__________________
Kevin 1974 Chevy C-10 (The Mistress) 1971 VW Bus 1973 VW Super Beetle 1996 Jeep Cherokee Last edited by TyKby2; 03-17-2011 at 04:00 PM. |
![]() |
![]() |
#977 | |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
Follow this LINK there is a drawing with the dimensions the rotors will need to be turned down to on the end. I also had to cut off the dust caps and end of the spindles for the rims to fit. Then I had to use silicone to hold the center caps on. They were an early version of these. I think the newer ones the center caps will work out better. good luck |
|
![]() |
![]() |
#978 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,937
|
![]()
I just put a set on my 71 and couldn't be happier! The front hub had to have just the lip shaved down took the guy about 10 minutes to do this. The backs fit fine with no spacer. I'm very pleased with how they look. Oh yea he did tap in the bearing cap a little too!
![]()
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
#979 |
Amateur Rust Fighter
Join Date: Sep 2007
Location: Mankato, MN
Posts: 1,087
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
With all due respect, I think you need to define "fine" and post your pics from the other thread so no one else is misled by this. With your 275-series tires and no spacers, you've got what looks like 1/4-1/2" of clearance, which is going to rub as the body and rear end move, especially with the trailing arm rear. Your track width is also narrower at the rear than at the front. Yes, they bolted on, but please tell the whole story before others rush out and think they can do the same as you did without any problems. For people who run a wider tire (like my 295s) and/or actually care if their tires rub, these won't "fit fine" by most standards. However, a pair of spacers can be had for under $40 that will fix this.
That said, they look great on your truck, as I've said previously. I'm not posting this as a personal attack but simply trying to clarify things. I've spent WAY too much time working with others and top management at the company itself to get this fixed and provide accurate info to now just sit back when someone comes along and says they "fit fine." ![]() I'll save others the trouble of finding your no-spacer pics. Here they are: ![]() ![]()
__________________
Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...) Last edited by brossow; 03-18-2011 at 08:51 AM. |
![]() |
![]() |
#980 | |
oldschoolblazer@yahoo.com
Join Date: Jun 2007
Location: Long Beach CA.
Posts: 1,968
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
![]() I agree BROSSOW |
|
![]() |
![]() |
#981 | |
Registered User
Join Date: Dec 2010
Location: Buford, GA
Posts: 39
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
It looks like the newest ones don't require the dust cap to be cut up. Is it just the rotor hat surface that needs to be milled .38"? Or are there multiple angles that are needed? I'm planning on running the 20" wheels staggered and I have drop spindles. I'm not new to "making" things work with spindles and wheels, but it'd be nice if I didn't have to worry about the spindles. I had to grind down the loving crap out of my Lightning's spindles to fit the factory wheels... Sheesh. ![]() -Tyler Posted via Mobile Device
__________________
Edited by Forum Staff!
Last edited by spazzyfry123; 03-18-2011 at 01:22 PM. |
|
![]() |
![]() |
#982 | |
Amateur Rust Fighter
Join Date: Sep 2007
Location: Mankato, MN
Posts: 1,087
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
![]()
__________________
Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...) |
|
![]() |
![]() |
#983 | |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
|
|
![]() |
![]() |
#984 | |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
|
|
![]() |
![]() |
#985 |
Amateur Rust Fighter
Join Date: Sep 2007
Location: Mankato, MN
Posts: 1,087
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Not sure (I've only had the new rims to work with) but I would guess they won't. The new ones use a rubber O-ring that seats in a groove inside the bore, which I strongly suspect isn't present on the older rims.
__________________
Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...) |
![]() |
![]() |
#986 |
Registered User
Join Date: Jul 2005
Location: Saint Simons Island,Georgia
Posts: 230
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
never mind!
__________________
Harrol 1968 SWB 1968 SWB 4x4 1969 Suburban 1970 LWB 1970 Blazer 2002 Tahoe Inside every older person is a younger person wondering what happened Last edited by HarrolLS1; 04-23-2011 at 10:31 PM. |
![]() |
![]() |
#987 | |
Amateur Rust Fighter
Join Date: Sep 2007
Location: Mankato, MN
Posts: 1,087
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
![]() EDIT: LOL! Looks like you figured that out while I was posting my reply. ![]()
__________________
Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...) Last edited by brossow; 04-23-2011 at 10:39 PM. |
|
![]() |
![]() |
#988 |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Well I guess we'll see. I would sure like to see them tweak the back spacing issue too. It sure would be cool to just bolt on a perfect fit
![]()
__________________
Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 04-23-2011 at 11:49 PM. |
![]() |
![]() |
#989 |
Registered User
Join Date: May 2006
Location: So.Cal
Posts: 542
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Update!
American Wheel Corp will be fixing the lip issue very soon. I will keep you posted on the info as I get it. David |
![]() |
![]() |
#990 | |
Amateur Rust Fighter
Join Date: Sep 2007
Location: Mankato, MN
Posts: 1,087
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
![]()
__________________
Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...) |
|
![]() |
![]() |
#991 |
Registered User
Join Date: May 2006
Location: So.Cal
Posts: 542
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Good point. Hopefully I will have some positive info soon.
Last edited by djw32; 04-29-2011 at 01:30 AM. |
![]() |
![]() |
#992 |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Has anyone actually purchased a set of these so called "direct bolt on" Boss 338s yet?
__________________
Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 04-29-2011 at 08:55 AM. |
![]() |
![]() |
#993 | |
Amateur Rust Fighter
Join Date: Sep 2007
Location: Mankato, MN
Posts: 1,087
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
![]()
__________________
Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...) |
|
![]() |
![]() |
#994 |
Registered User
Join Date: Nov 2002
Location: Charleston, South Carolina
Posts: 1,370
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
I was about to say this! Mine would have directly bolted on to my 1991 with the right tire sizes.
__________________
2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina |
![]() |
![]() |
#996 | |
Amateur Rust Fighter
Join Date: Sep 2007
Location: Mankato, MN
Posts: 1,087
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
![]()
__________________
Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...) |
|
![]() |
![]() |
#997 | |
Registered User
![]() Join Date: Apr 2004
Location: Sacramento
Posts: 3,737
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Quote:
![]()
__________________
'72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht |
|
![]() |
![]() |
#998 |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
What did you have to do to get yours to fit? Spacers in the rear and cut the rotor up front?
__________________
Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 04-29-2011 at 11:35 AM. |
![]() |
![]() |
#999 |
Registered User
![]() Join Date: Apr 2004
Location: Sacramento
Posts: 3,737
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
yes
__________________
'72 2wd blazer, bagged w/ watts link & EDC '72 C10 "Lowered Farm Truck" STOLEN 5-18-11 '66 impala ht |
![]() |
![]() |
#1000 |
Registered User
Join Date: Mar 2008
Location: kansas city mo
Posts: 898
|
Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
So tell me who has the best deal on these? I am looking for 20x8.5 fronts with 20x10 rears? If there is a place that is cheaper let me know? I am in KC as well.
__________________
Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED |
![]() |
![]() |
Bookmarks |
|
|