1967 Chevy CST aka "the loud truck" - Page 40 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shawno72 · 03-15-2013, 10:29 AM

Quote:

Originally Posted by NewType72

(Note to self never line up with Shawn)

Posted via Mobile Device

67chevy1series · 03-15-2013, 11:03 AM

Quote:

Originally Posted by NewType72

(Note to self never line up with Shawn)

Posted via Mobile Device

Quote:

Originally Posted by shawno72

Quote:

Originally Posted by Ol Blue K20

very possible, the 70 z28 was rated 350hp
Posted via Mobile Device

Quote:

Originally Posted by shawno72

Yep we're gonna have to keep his thread going without him again

so Dale, as I'm driving this big block 396 elco, the engine looks fairly clean and appears to have been repainted and rebuilt not to long ago, it was sitting in my buddies back storage for a couple of years, anyway as I hammer down the gas pedal it takes off and has some good power. Enough power for me to say "yeah this has the potential for some tickets", but I am saying to myself that my truck would eat this thing up. Now the big block sounds like it had a stock cam, nice smooth idle. After seeing my cam specs and knowin that I only have 1.94 heads is it possible that my hp's are up around 350?
Posted via Mobile Device

Quote:

Originally Posted by Ol Blue K20

Posted via Mobile DeviceRick, you're being a little on the quiet side. hope it's cause youre busy.
Posted via Mobile Device

Oh it is

Quote:

Originally Posted by jbclassix

Rick!!! get rid of those rubber strips of intake leakers, then run a bead of "Right Stuff" silicone front and back. Then let it cure for atleast 12 hours before running it!

Those things are that bad huh? Well I don't have right stuff but I do have the black magic can I use that?

Quote:

Originally Posted by Ol Blue K20

I normally go for the swap meet and then wander through the show, but I may hang out a while this time

Quote:

Originally Posted by shawno72

Way to go Rick!! Engine is looking killer. Hey Dale so you are gonna make it out to GG's I take it.

Is there anything you guys suggest I take to the car show besides the 67?

Well guys I was hard at work yesterday, I gotta alot of stuff done. Pics soon to follow!
Posted via Mobile Device

shawno72 · 03-15-2013, 11:24 AM

Quote:

Originally Posted by 67chevy1series

Is there anything you guys suggest I take to the car show besides the 67?

Well guys I was hard at work yesterday, I gotta alot of stuff done. Pics soon to follow!
Posted via Mobile Device

Yep bring some chairs some meat for the BBQ and some drinks.

67chevy1series · 03-15-2013, 11:39 AM

Ok I have this big super fancy BBQ'r but it's a little extreme so ill bring my little old Kmart BBQ'r and ill bring some beer for you guys and some soda for me

Posted via Mobile Device

shawno72 · 03-15-2013, 11:47 AM

sounds good Rick, bring some extra soda for me too.

**Ol Blue K20** · 03-15-2013, 11:55 AM

Quote:

Originally Posted by 67chevy1series

Ok I have this big super fancy BBQ'r but it's a little extreme so ill bring my little old Kmart BBQ'r and ill bring some beer for you guys and some soda for me

Posted via Mobile Device

Hey Rick, don't bring beer we don't want ya getting a MIP ticket, not worth the hassle.

67chevy1series · 03-15-2013, 11:56 AM

What'll ya have? Haha will do Shawn

Posted via Mobile Device

67chevy1series · 03-15-2013, 11:59 AM

Quote:

Originally Posted by Ol Blue K20

Hey Rick, don't bring beer we don't want ya getting a MIP ticket, not worth the hassle.

Haha dale you clever guy! But yeah on second thought bringing beer to the party when we all have to drive isn't a good idea lol
Posted via Mobile Device

**Ol Blue K20** · 03-15-2013, 12:02 PM

Quote:

Originally Posted by 67chevy1series

Haha dale you clever guy! But yeah on second thought bringing beer to the party when we all have to drive isn't a good idea lol
Posted via Mobile Device

yupppp!!

67chevy1series · 03-15-2013, 12:59 PM

soda it is then! haha... and i think you guys waited long enough. i didnt take a picture but i got the harmonic balancer on all the way lastnight before i went to bed. its funny everytime i work on this thing when i go inside for the day my hands are less and less dirty! guess my engines pretty clean

anyways yesterday i got my gasket, oil and some black paint for the brackets. while the brackets were drying i put the oil pan gasket on and oil pan then i bolted the manifolds on with new gaskets. after that i bolted the AC brackets on. need to get 2 really long bolts for the center of the passenger exhuast manifold and 1 long one for the lower passenger water pump. and then i should be good to go!

**Ol Blue K20** · 03-15-2013, 01:05 PM

Nice... lookin good

67chevy1series · 03-15-2013, 01:08 PM

Quote:

Originally Posted by Ol Blue K20

Nice... lookin good

should look better between my black frame rails!

**Ol Blue K20** · 03-15-2013, 01:23 PM

Quote:

Originally Posted by 67chevy1series

should look better between my black frame rails!

30 more minutes and it'll be

time. No overtime today!! YEAH!!

67chevy1series · 03-15-2013, 01:25 PM

lol wish i didnt have school so i could be at home tearing my truck apart!

shawno72 · 03-15-2013, 02:10 PM

Quote:

Originally Posted by 67chevy1series

lol wish i didnt have school so i could be at home tearing my truck apart!

Soon enough, you'll be barking.

fastcam1 · 03-15-2013, 02:26 PM

Looks awesome makes my motor look like a turd lol
Posted via Mobile Device

67chevy1series · 03-15-2013, 02:38 PM

Quote:

Originally Posted by shawno72

Soon enough, you'll be barking.

Haha if I don't already... I can tell by the way the 67 acts that if I had a nice engine and a posi it would LIGHT EM UP! Muhhahahaha!

Quote:

Originally Posted by fastcam1

Looks awesome makes my motor look like a turd lol
Posted via Mobile Device

That's what I feel like when I look at other people's builds and there engines and then I look it my tired 302 all dirty and leaky marking its territory everywhere I go.. So hopefully when I pop the good and you see my 327 "turbo fire" all cleaned up, everybody will have something to look at!
Posted via Mobile Device

jbclassix · 03-15-2013, 05:51 PM

Don't know about the black magic... it should work better than those rubber strips. I am kicking my butt for dropping the 350 in my 95 with the rubber strips. It is POORING out oil! Ask anyone one here about the rubber strips.

shawno72 · 03-15-2013, 06:03 PM

Loose the strips Rick!!

**Ol Blue K20** · 03-15-2013, 08:07 PM

yes Rick do not use the rubber end gaskets. use a good quality silicone. Put a small dab under the side gaskets at the end and then a 1/4 inch bead and set the manifold.Let it cure at least overnight before you start it. So set the manifold before you put the motor in and it will be cured by the time you get it all hooked up. If you have questions, call me
Posted via Mobile Device

**Ol Blue K20** · 03-15-2013, 09:42 PM

Is the DZ block out yet?.........hmmmm....huh........
Posted via Mobile Device

Posted via Mobile Device

DesertCat · 03-16-2013, 12:03 AM

Almost 1000 posts, wow! Quite a build thread Rick, truck's looking good!

67chevy1series · 03-16-2013, 11:06 PM

Quote:

Originally Posted by DesertCat

Almost 1000 posts, wow! Quite a build thread Rick, truck's looking good!

Thanks Blake!

Quote:

Originally Posted by Ol Blue K20

Is the DZ block out yet?.........hmmmm....huh........
Posted via Mobile Device

Posted via Mobile Device

Quote:

Originally Posted by Ol Blue K20

yes Rick do not use the rubber end gaskets. use a good quality silicone. Put a small dab under the side gaskets at the end and then a 1/4 inch bead and set the manifold.Let it cure at least overnight before you start it. So set the manifold before you put the motor in and it will be cured by the time you get it all hooked up. If you have questions, call me
Posted via Mobile Device

Quote:

Originally Posted by shawno72

Loose the strips Rick!!

Quote:

Originally Posted by jbclassix

Don't know about the black magic... it should work better than those rubber strips. I am kicking my butt for dropping the 350 in my 95 with the rubber strips. It is POORING out oil! Ask anyone one here about the rubber strips.

Wow. Well Im not using them instead I just siliconed it real good!
.
.
.
The 302 came out this morning! And the 327 went in around 6:00 and I went in to eat, came out and it was dark so I just bolted the fan and shroud on and then put the hood back on. Get back on it tomorrow . I'm taking pics. But probably won't get around to them til monday
Posted via Mobile Device

**Ol Blue K20** · 03-17-2013, 12:13 AM

K.'...waiting for good news

Posted via Mobile Device
Posted via Mobile Device

67chevy1series · 03-17-2013, 12:37 AM

Well I'm gonna get back on it to prow and hopefully it fires up!

03-15-2013, 11:39 AM	#979
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 Chevy CST aka "the loud truck" Ok I have this big super fancy BBQ'r but it's a little extreme so ill bring my little old Kmart BBQ'r and ill bring some beer for you guys and some soda for me Posted via Mobile Device

03-15-2013, 11:47 AM	#980
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 1967 Chevy CST aka "the loud truck" sounds good Rick, bring some extra soda for me too. __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-15-2013, 11:56 AM	#982
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 Chevy CST aka "the loud truck" What'll ya have? Haha will do Shawn Posted via Mobile Device

03-15-2013, 12:59 PM	#985
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 Chevy CST aka "the loud truck" soda it is then! haha... and i think you guys waited long enough. i didnt take a picture but i got the harmonic balancer on all the way lastnight before i went to bed. its funny everytime i work on this thing when i go inside for the day my hands are less and less dirty! guess my engines pretty clean anyways yesterday i got my gasket, oil and some black paint for the brackets. while the brackets were drying i put the oil pan gasket on and oil pan then i bolted the manifolds on with new gaskets. after that i bolted the AC brackets on. need to get 2 really long bolts for the center of the passenger exhuast manifold and 1 long one for the lower passenger water pump. and then i should be good to go! Attached Images

03-15-2013, 01:05 PM	#986
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,932	Re: 1967 Chevy CST aka "the loud truck" Nice... lookin good __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

03-15-2013, 01:25 PM	#989
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 Chevy CST aka "the loud truck" lol wish i didnt have school so i could be at home tearing my truck apart!

03-15-2013, 02:26 PM	#991
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: 1967 Chevy CST aka "the loud truck" Looks awesome makes my motor look like a turd lol Posted via Mobile Device __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

03-15-2013, 05:51 PM	#993
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: 1967 Chevy CST aka "the loud truck" Don't know about the black magic... it should work better than those rubber strips. I am kicking my butt for dropping the 350 in my 95 with the rubber strips. It is POORING out oil! Ask anyone one here about the rubber strips. __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

03-15-2013, 06:03 PM	#994
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: 1967 Chevy CST aka "the loud truck" Loose the strips Rick!! __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-15-2013, 08:07 PM	#995
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,932	Re: 1967 Chevy CST aka "the loud truck" yes Rick do not use the rubber end gaskets. use a good quality silicone. Put a small dab under the side gaskets at the end and then a 1/4 inch bead and set the manifold.Let it cure at least overnight before you start it. So set the manifold before you put the motor in and it will be cured by the time you get it all hooked up. If you have questions, call me Posted via Mobile Device __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

03-15-2013, 09:42 PM	#996
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,932	Re: 1967 Chevy CST aka "the loud truck" Is the DZ block out yet?.........hmmmm....huh........ Posted via Mobile Device Posted via Mobile Device __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

03-16-2013, 12:03 AM	#997
DesertCat Registered User Join Date: Mar 2011 Location: Valley of the Sunstroke, Arizona Posts: 1,210	Re: 1967 Chevy CST aka "the loud truck" Almost 1000 posts, wow! Quite a build thread Rick, truck's looking good! __________________ My build thread - Devastation and Reform http://67-72chevytrucks.com/vboard/s...d.php?t=567131

03-17-2013, 12:13 AM	#999
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,932	Re: 1967 Chevy CST aka "the loud truck" K.'...waiting for good news Posted via Mobile Device Posted via Mobile Device __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

03-17-2013, 12:37 AM	#1000
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 1967 Chevy CST aka "the loud truck" Well I'm gonna get back on it to prow and hopefully it fires up!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.