My '67 Fleetside C10 renew - Page 41 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Vic1947** · 08-06-2015, 11:34 PM

Nice work, John! Those fat weenies look like they'll stick going around corners.

jlsanborn · 08-07-2015, 09:23 PM

Quote:

Originally Posted by 71Sleeper

Dude I just read through your build and I take my hat off to you. I just don't have the knowledge, space and resources to do a frame off. Plus there is no way I would attempt to do any type of body work. I hope everything checks out with the 327. There is just something about keeping the old school feel and to have a standard behind it will only add to the fun. I am trying to decide if I want to change over to a 700r4 or try my best to find a solid 4 speed to tuck behind my 327. I will be following your build.

Thanks for the read man! I've got the heads and crank back at the house. Block checked out good and is still at the shop awaiting pistons and rods.

Quote:

Originally Posted by Vic1947

Nice work, John! Those fat weenies look like they'll stick going around corners.

Thanks Vic! I've wanted a ride with 295 BFGs out back since I was a baby

Average Joe · 08-09-2015, 01:01 AM

Nice work. Sounds like a healthy 327 you're building!

88Stanger · 08-09-2015, 02:26 AM

Nice job! read your entire post. I'll be taking some of your info to use on my build. Great job. Great to see another Washington truck.

Low Elco · 08-10-2015, 12:38 PM

Looks gooood, John! Sounds like Knuckles is settling in well at his new gig!

jlsanborn · 08-10-2015, 07:47 PM

Quote:

Originally Posted by Average Joe

Nice work. Sounds like a healthy 327 you're building!

Thanks Joe! I'm still trying to map it all out before I order pistons.

Quote:

Originally Posted by 88Stanger

Nice job! read your entire post. I'll be taking some of your info to use on my build. Great job. Great to see another Washington truck.

Thanks for the read man! This site has everything you need. DIY painting expert is right below us.

Quote:

Originally Posted by Low Elco

Looks gooood, John! Sounds like Knuckles is settling in well at his new gig!

Thanks Chip! Still avoiding the sandpaper like the plague

He is loving the job. He's still on the sh!t end of the deal, tearing down, hot tanking, magnafluxing, running for parts, etc... but he has gotten some time on the balancer, hanging pistons and a little assembly. He's also working on lot's of different brands, imports and domestic.

Low Elco · 08-11-2015, 12:29 PM

Glad it's going well for him. Better get that cab up on the nose and make with the Raptor liner!

summitflier · 08-11-2015, 12:33 PM

subscribed

jlsanborn · 08-11-2015, 05:37 PM

Quote:

Originally Posted by Low Elco

Glad it's going well for him. Better get that cab up on the nose and make with the Raptor liner!

That's the plan!

Quote:

Originally Posted by summitflier

subscribed

Thanks man! Ma-In-Law lives on Tapps Island.

Paul Y · 08-21-2015, 07:31 AM

Found my way over here from the No Limits Joe Touring thread and glad I did!

Great build and love the rear exhaust detail, was thinking about something similar on my 66 but as I am one of those terrible LS people, want to keep the area clear for a future rear tank.

Looking forward to the next instalment.

P.

jlsanborn · 09-20-2015, 02:29 AM

Unfortunately I haven't done much here. Really need a few bucks to get this engine built. Looking for side work. Knuckles got his motor fired today. Test drive tomorrow and a smokey video!

https://youtu.be/I04KCKPhRA8

SierraMtns · 09-20-2015, 08:05 PM

Quote:

Originally Posted by jlsanborn

Unfortunately I haven't done much here. Really need a few bucks to get this engine built. Looking for side work. Knuckles got his motor fired today. Test drive tomorrow and a smokey video!

https://youtu.be/I04KCKPhRA8

Sweet motor and its awesome to see him running a Q-jet.

**Captainfab** · 09-21-2015, 12:56 AM

The engine sounds good and is quite responsive! Great job

Is it a flat tappet cam or a roller?

jlsanborn · 09-21-2015, 11:12 AM

Quote:

Originally Posted by SierraMtns

Sweet motor and its awesome to see him running a Q-jet.

I've always liked them too but it's a temporary thing for him. He'll be saving for a double pumper, and fuel

Quote:

Originally Posted by Captainfab

The engine sounds good and is quite responsive! Great job

Is it a flat tappet cam or a roller?

XR282HR (hydraulic roller), LS valves and springs (2.00 x 1.55) and Comp 1.6:1 roller rockers.

Thanks guys! He's pretty happy with the results so far.

Low Elco · 09-21-2015, 01:30 PM

Go Boy GO!

**Vic1947** · 09-23-2015, 10:51 PM

Quote:

Originally Posted by jlsanborn

...XR282HR (hydraulic roller), LS valves and springs (2.00 x 1.55) and Comp 1.6:1 roller rockers.

Schweeet! In retrospect, I wish I'd gone the extra mile and put a roller in mine. The peace of mind alone would be worth it.

mcbassin · 09-24-2015, 09:01 AM

The new motor sounds great!

Low Elco · 01-05-2016, 01:17 PM

You gettin' anything done up there Johnny? The people demand updates! What's up on the truck? What's Knuckles been up to? Are you dodging all the riots, fires, mudslides, armed militants, etc? Git on the stick, son!

jlsanborn · 01-05-2016, 05:16 PM

Quote:

Originally Posted by Low Elco

You gettin' anything done up there Johnny? The people demand updates! What's up on the truck? What's Knuckles been up to? Are you dodging all the riots, fires, mudslides, armed militants, etc? Git on the stick, son!

Thanks for checkin' Chip! Knuckles is still on the grind and has been the only one busy in my shop. Lifted the Swiss Cheeze and got his front driveline back in, built a 10.5:1 big block and just now has it installed in a square K20 for a pal. I'll take a vid of that thing, sounds killer! He picked up an '03 RM125 and I went through my ride at the end of the season. I've got some moolah to get started on my motor. Waiting for the king-salami to get back from vacation at Knuckle's shop, then I'm sending my heads in to start. Gotta finish the "plan" engine wise. I want to get a final cc on my chambers after they're built and then decide on pistons. Prolly going with a forged dome, then getting them machined down to a reasonable compression ratio. Boy has his eye on a forged 283 crank at work, thinks I oughtta build a 302! I don't think so...

https://www.youtube.com/watch?v=RKWmN8CIIko

https://www.youtube.com/watch?v=D-7TLXYQDpg

Low Elco · 01-06-2016, 09:10 AM

Hi-windin'! Glad all are well.

butternut1972 · 01-08-2016, 07:47 PM

Looking good. Diggin' the wheel and tire combo.

88Stanger · 01-09-2016, 01:26 AM

nice build. Im just down south a bit from you. maybe we can meet at a show or something and compare notes.

jlsanborn · 01-09-2016, 03:22 PM

Quote:

Originally Posted by butternut1972

Looking good. Diggin' the wheel and tire combo.

Thanks man! How's the stepper?

Quote:

Originally Posted by 88Stanger

nice build. Im just down south a bit from you. maybe we can meet at a show or something and compare notes.

Thanks! I'm down for that.

jlsanborn · 01-09-2016, 03:23 PM

Swiss Cheeze! Power steering pump is not happy.

https://www.youtube.com/watch?v=x50TLShe1bM

**Captainfab** · 01-10-2016, 01:21 AM

Runs and sounds really good

Is that the same engine he built back in September?

Quote:

Originally Posted by jlsanborn

Swiss Cheeze! Power steering pump is not happy.

https://www.youtube.com/watch?v=x50TLShe1bM

08-06-2015, 11:34 PM	#1001
Vic1947 Senior Member Join Date: Mar 2012 Location: Kansas City, MO Posts: 2,041	Re: My '67 Fleetside C10 renew Nice work, John! Those fat weenies look like they'll stick going around corners. __________________ Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas

08-09-2015, 01:01 AM	#1003
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,352	Re: My '67 Fleetside C10 renew Nice work. Sounds like a healthy 327 you're building! __________________ 1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843

08-09-2015, 02:26 AM	#1004
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,651	Re: My '67 Fleetside C10 renew Nice job! read your entire post. I'll be taking some of your info to use on my build. Great job. Great to see another Washington truck.

08-10-2015, 12:38 PM	#1005
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: My '67 Fleetside C10 renew Looks gooood, John! Sounds like Knuckles is settling in well at his new gig! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

08-11-2015, 12:29 PM	#1007
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: My '67 Fleetside C10 renew Glad it's going well for him. Better get that cab up on the nose and make with the Raptor liner! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

08-11-2015, 12:33 PM	#1008
summitflier Registered User Join Date: Jun 2015 Location: Ephrata, WA Posts: 308	Re: My '67 Fleetside C10 renew subscribed __________________ 68 C10 SSB 383 12 Charger 6.4L 12 Accord 3.5L (Wife's ride) 05 Ram 1500 5.7L My build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=676545

08-21-2015, 07:31 AM	#1010
Paul Y Registered User Join Date: Jul 2013 Location: Essex Posts: 948	Re: My '67 Fleetside C10 renew Found my way over here from the No Limits Joe Touring thread and glad I did! Great build and love the rear exhaust detail, was thinking about something similar on my 66 but as I am one of those terrible LS people, want to keep the area clear for a future rear tank. Looking forward to the next instalment. P.

09-20-2015, 02:29 AM	#1011
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,367	Re: My '67 Fleetside C10 renew Unfortunately I haven't done much here. Really need a few bucks to get this engine built. Looking for side work. Knuckles got his motor fired today. Test drive tomorrow and a smokey video! https://youtu.be/I04KCKPhRA8 __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

09-21-2015, 12:56 AM	#1013
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: My '67 Fleetside C10 renew The engine sounds good and is quite responsive! Great job Is it a flat tappet cam or a roller? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-21-2015, 01:30 PM	#1015
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: My '67 Fleetside C10 renew Go Boy GO! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

09-24-2015, 09:01 AM	#1017
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: My '67 Fleetside C10 renew The new motor sounds great! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-05-2016, 01:17 PM	#1018
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: My '67 Fleetside C10 renew You gettin' anything done up there Johnny? The people demand updates! What's up on the truck? What's Knuckles been up to? Are you dodging all the riots, fires, mudslides, armed militants, etc? Git on the stick, son! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

01-06-2016, 09:10 AM	#1020
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: My '67 Fleetside C10 renew Hi-windin'! Glad all are well. __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

01-08-2016, 07:47 PM	#1021
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: My '67 Fleetside C10 renew Looking good. Diggin' the wheel and tire combo. __________________ 1972 GMC (PROJECT LONG OVERDUE) 1998 SWB 4WD

01-09-2016, 01:26 AM	#1022
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,651	Re: My '67 Fleetside C10 renew nice build. Im just down south a bit from you. maybe we can meet at a show or something and compare notes.



Register or Log In To remove these advertisements.

01-09-2016, 03:23 PM	#1024
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,367	Re: My '67 Fleetside C10 renew Swiss Cheeze! Power steering pump is not happy. https://www.youtube.com/watch?v=x50TLShe1bM __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

Register or Log In To remove these advertisements.