How to: Ruin a perfectly good C10 - Page 41 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 11-24-2012, 12:55 PM

Quote:

Originally Posted by classicchev

Just cant get the Blazer out of the memory bank EY!!!!! I know of a couple that are decent.

Haha- no, I can't. It pains me to look at your avatar

I only have to think about what I used the proceeds for to remind me that it was the right decision to sell--and you can always get more toys...

PMing you on those
Posted via Mobile Device

67ctener · 11-24-2012, 01:46 PM

Brakes turned out awesome, wish I saw your thread before I spent my life savings on my cpp kit
Posted via Mobile Device

gringoloco · 11-24-2012, 11:44 PM

Thanks! The CPP and McGaughys kits are good for the money and I'm not sure I saved much by doing them this way, but I can say they are custom

Posted via Mobile Device

classicchev · 11-25-2012, 01:32 PM

if you dont want a project that 2WD from NY looks pretty good, have you talked to him yet. There is always Phattony's up here, its beautiful and very well done with some very unique touches.

Good luck with the search..

gringoloco · 11-25-2012, 03:51 PM

Maaaaan, timing is just so bad for Louise right now. Wish I could get her back from you and put her in storage for a while. Just not in the cards right now...

I am talking to Charlie about that blue 6-cyl. I'll check out phat Tony's, but I think he may be out of my price range.
Posted via Mobile Device

classicchev · 11-25-2012, 06:06 PM

Im glad you feel that way, I change my mind too often. i wish I could have everything

FRENCHBLUE72 · 11-25-2012, 08:21 PM

I gotta tell ya there are only 3 blazers that I would love to own (not including mine) gringos old one.... the silver one from reno and brian mccormicks..

FRENCHBLUE72 · 11-25-2012, 08:30 PM

last pic

C10_ustacould · 11-25-2012, 09:47 PM

Awesome truck brother! I am digging all of the custom engineering you are putting into it. Keep it up, i'll be following along.

gringoloco · 11-26-2012, 12:45 AM

Quote:

Originally Posted by classicchev

Im glad you feel that way, I change my mind too often. i wish I could have everything

Haha- me too! One of each, please

Quote:

Originally Posted by FRENCHBLUE72

I gotta tell ya there are only 3 blazers that I would love to own (not including mine) gringos old one.... the silver one from reno and brian mccormicks..

That says a lot. It does kinda grow on ya, don't it?

Quote:

Originally Posted by BucksSS

Awesome truck brother! I am digging all of the custom engineering you are putting into it. Keep it up, i'll be following along.

Thanks a lot! Just piddlin' around

Posted via Mobile Device

Portmod7 · 11-26-2012, 11:24 AM

Quote:

Originally Posted by 68GMCCustom

Just curious. There are trans tailshaft and rear axle pinion type p-brakes that attach to the d-shaft.

Quote:

Originally Posted by gringoloco

I've had that thought, too. Hard to find an affordable pinion option. Who makes those you posted? What's the cost like? I can upgrade to the Eldo calipers for a couple hun.

That unit from TSM is what I have, and am going to run.

Just a word of caution, I'm pretty sure it doesn't meet the DOT requirements for an "emergency brake"....

68GMCCustom · 11-26-2012, 07:48 PM

Really? I thought most shops tested it by putting the vehicle in D, and the e-brake had to at least hold it in place w/o rolling.

killer71 · 12-01-2012, 10:25 PM

Saw you Rollin into shopping center off of Youree drive this evening...I must say your truck looks soooo much better in person! I' ll run you down one day!
Posted via Mobile Device

Portmod7 · 12-02-2012, 03:31 AM

Quote:

Originally Posted by 68GMCCustom

Really? I thought most shops tested it by putting the vehicle in D, and the e-brake had to at least hold it in place w/o rolling.

You might be right, I really don't know for sure. It just seems like I came across something in my readings about it. I figured I would take my chances.
Posted via Mobile Device

Wasted Income · 12-13-2012, 08:09 PM

Nice build, GL. Looking forward to following your next blazer project.

gringoloco · 12-14-2012, 01:52 AM

Quote:

Originally Posted by Wasted Income

Nice build, GL. Looking forward to following your next blazer project.

Thanks! Me too--gotta get one first--hopefully soon, have my eye on a couple prospects

Posted via Mobile Device

SCOTI · 12-14-2012, 09:24 AM

What's the deal w/deciding against the forward arms?

gringoloco · 12-14-2012, 10:51 AM

Nothing against the arms- I needed to liquidate for another hobby and they were an easy sale. I will probably do the caster mod at some point. Play time/money is all focused on a Blazer right now. My wife is on board (even suggested it), so I'm striking while the iron is hot

Posted via Mobile Device

**67cheby** · 12-14-2012, 11:38 AM

MY PLAN EXACTLY ! LOL, if she is a go, you better do it !

Bennett68C10 · 12-14-2012, 11:48 AM

Quote:

Originally Posted by gringoloco

Nothing against the arms- I needed to liquidate for another hobby and they were an easy sale. I will probably do the caster mod at some point. Play time/money is all focused on a Blazer right now. My wife is on board (even suggested it), so I'm striking while the iron is hot

Posted via Mobile Device

Quote:

Originally Posted by 67cheby

MY PLAN EXACTLY ! LOL, if she is a go, you better do it !

I agree do it before she changes her mind

Can't wait to see what both you guys do with Blazers. Someday I would like to get one to go with my 68, until then I will live through you guys

Wasted Income · 12-14-2012, 12:17 PM

x3. My wife is on board with my blazer project...so she doesn't $hit brix when the porch is full of boxes from the UPS man

lol

**67cheby** · 12-14-2012, 12:23 PM

LOL, awesome !

gringoloco · 12-15-2012, 11:05 AM

Quote:

Originally Posted by SCOTI

What's the deal w/deciding against the forward arms?

Quote:

Originally Posted by gringoloco

Nothing against the arms- I needed to liquidate for another hobby and they were an easy sale. I will probably do the caster mod at some point. Play time/money is all focused on a Blazer right now. My wife is on board (even suggested it), so I'm striking while the iron is hot

Posted via Mobile Device

Here's what the forward arm money was spent on--it's a BMX style 29er, "The Big Ripper". Saw it and had to have it--I'm an old BMXer from way back who used to ride a PKRipper and this thing makes me feel like a 6'6" kid again

jasonhall · 12-15-2012, 11:31 AM

That's sweet !! I wanna get a cruiser and race old man style .. But my wife thinks I'm a retard for wanting to ride bmx again .. Cool bike !!
Posted via Mobile Device

klmore · 12-15-2012, 11:34 AM

I had a Hutch 29 back in the day. I would love to have that bike back. My cousin still has it to this day.

11-24-2012, 01:46 PM	#1002
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: How to: Ruin a perfectly good C10 Brakes turned out awesome, wish I saw your thread before I spent my life savings on my cpp kit Posted via Mobile Device __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

11-24-2012, 11:44 PM	#1003
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 Thanks! The CPP and McGaughys kits are good for the money and I'm not sure I saved much by doing them this way, but I can say they are custom Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-25-2012, 01:32 PM	#1004
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: How to: Ruin a perfectly good C10 if you dont want a project that 2WD from NY looks pretty good, have you talked to him yet. There is always Phattony's up here, its beautiful and very well done with some very unique touches. Good luck with the search.. __________________ 67- 72 Parts collecter

11-25-2012, 03:51 PM	#1005
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 Maaaaan, timing is just so bad for Louise right now. Wish I could get her back from you and put her in storage for a while. Just not in the cards right now... I am talking to Charlie about that blue 6-cyl. I'll check out phat Tony's, but I think he may be out of my price range. Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-25-2012, 06:06 PM	#1006
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: How to: Ruin a perfectly good C10 Im glad you feel that way, I change my mind too often. i wish I could have everything __________________ 67- 72 Parts collecter

11-25-2012, 08:21 PM	#1007
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: How to: Ruin a perfectly good C10 I gotta tell ya there are only 3 blazers that I would love to own (not including mine) gringos old one.... the silver one from reno and brian mccormicks.. Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-25-2012, 08:30 PM	#1008
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: How to: Ruin a perfectly good C10 last pic Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-25-2012, 09:47 PM	#1009
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: How to: Ruin a perfectly good C10 Awesome truck brother! I am digging all of the custom engineering you are putting into it. Keep it up, i'll be following along. __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

11-26-2012, 07:48 PM	#1012
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: How to: Ruin a perfectly good C10 Really? I thought most shops tested it by putting the vehicle in D, and the e-brake had to at least hold it in place w/o rolling. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

12-01-2012, 10:25 PM	#1013
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: How to: Ruin a perfectly good C10 Saw you Rollin into shopping center off of Youree drive this evening...I must say your truck looks soooo much better in person! I' ll run you down one day! Posted via Mobile Device __________________ R.I.P. Killer 71 10/26/07

12-13-2012, 08:09 PM	#1015
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: How to: Ruin a perfectly good C10 Nice build, GL. Looking forward to following your next blazer project. __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*

12-14-2012, 09:24 AM	#1017
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Re: How to: Ruin a perfectly good C10 What's the deal w/deciding against the forward arms? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-14-2012, 10:51 AM	#1018
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 Nothing against the arms- I needed to liquidate for another hobby and they were an easy sale. I will probably do the caster mod at some point. Play time/money is all focused on a Blazer right now. My wife is on board (even suggested it), so I'm striking while the iron is hot Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 12-14-2012 at 11:41 AM.

12-14-2012, 11:38 AM	#1019
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How to: Ruin a perfectly good C10 MY PLAN EXACTLY ! LOL, if she is a go, you better do it ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-14-2012, 12:17 PM	#1021
Wasted Income Boosted Member Join Date: May 2002 Location: Mackinaw, IL Posts: 2,200	Re: How to: Ruin a perfectly good C10 x3. My wife is on board with my blazer project...so she doesn't $hit brix when the porch is full of boxes from the UPS man lol __________________ 1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards *TURBO ALL THE THINGS!!*



Register or Log In To remove these advertisements.

12-14-2012, 12:23 PM	#1022
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How to: Ruin a perfectly good C10 LOL, awesome ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-15-2012, 11:31 AM	#1024
jasonhall Registered User Join Date: May 2008 Location: Stillwater Oklahoma Posts: 829	Re: How to: Ruin a perfectly good C10 That's sweet !! I wanna get a cruiser and race old man style .. But my wife thinks I'm a retard for wanting to ride bmx again .. Cool bike !! Posted via Mobile Device

12-15-2012, 11:34 AM	#1025
klmore Registered User Join Date: Sep 2012 Location: Shreveport, LA Posts: 156	Re: How to: Ruin a perfectly good C10 I had a Hutch 29 back in the day. I would love to have that bike back. My cousin still has it to this day. __________________ 1972 Suburban 2wd - Accuair, Mob steel 20". 2011 Range Rover HSE 2010 E 63 AMG 2013 GL 63 AMG

Register or Log In To remove these advertisements.