68 S/C update..... - Page 41 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68 short step · 07-06-2013, 06:06 PM

may of missed it, but are you running a 'tap up, tap down' switch for M on your 6L80e?

**Hart_Rod** · 07-06-2013, 06:39 PM

Quote:

Originally Posted by 68 short step

may of missed it, but are you running a 'tap up, tap down' switch for M on your 6L80e?

Yes sir!
Posted via Mobile Device

**Hart_Rod** · 07-08-2013, 09:33 AM

Quote:

Originally Posted by raull

wow you are flying !!!! , i have to get moving with mine

LOL, I can't wait to see it.

Quote:

Originally Posted by big_al_71

Wow!!!!!

The engine looks great in there cant wait to hear how it performs...

Thanks! Me too..

.

***

While I've been waiting on some metal to finish my transmission mount, I started working on installing the Vintage Air unit. I used the templates in the instructions and have all the vent holes cut out in the dash. Next I'll start working on the firewall block-off plates and installing the evaporator.

**Hart_Rod** · 07-08-2013, 09:38 AM

Center vent:

**Hart_Rod** · 07-08-2013, 01:50 PM

Firewall block off plate installed and evaporator mounted. Pretty easy so far....

EZ SPEED · 07-08-2013, 01:52 PM

Keep up the good work.

I installed one of those earlier this year.

**Hart_Rod** · 07-08-2013, 02:00 PM

Quote:

Originally Posted by EZ SPEED

Keep up the good work.

I installed one of those earlier this year.

Thanks! Pretty straight forward, eh?

On a different note, I'm wondering if I should invest the time in swapping my batter to the other side, so that I can have a cold air box?

EZ SPEED · 07-08-2013, 02:15 PM

Quote:

Originally Posted by Hart_Rod

Thanks! Pretty straight forward, eh?

On a different note, I'm wondering if I should invest the time in swapping my batter to the other side, so that I can have a cold air box?

Yep, A nice install.

I would move the battery if I was you

**Hart_Rod** · 07-08-2013, 02:17 PM

Quote:

Originally Posted by EZ SPEED

Yep, A nice install.

I would move the battery if I was you

I figured you were going to say that,

. Just more work and $$$$...., better now than later I guess.

STOCKISH · 07-08-2013, 02:39 PM

Looks great Rob, you wont know how to handle yourself riding around with the cool air blowing in your face! LOL, I would probably move the battery as well unless you can flip your intake to the other side somehow.

EZ SPEED · 07-08-2013, 03:11 PM

Quote:

Originally Posted by Hart_Rod

I figured you were going to say that,

. Just more work and $$$$...., better now than later I guess.

Yeah , your in so deep now...whats a little more..

**Hart_Rod** · 07-08-2013, 03:32 PM

Quote:

Originally Posted by 1972SuperCheyenne

Looks great Rob, you wont know how to handle yourself riding around with the cool air blowing in your face! LOL, I would probably move the battery as well unless you can flip your intake to the other side somehow.

Thanks! Not enough room to do the air box on drivers side.

Quote:

Originally Posted by EZ SPEED

Yeah , your in so deep now...whats a little more..

, yeah, I know, I know. Is this fast enough for you??

**68jewel** · 07-08-2013, 03:39 PM

Looking good Rob. Keep up the good work. That engine bay is amazing!!

NewType72 · 07-08-2013, 03:42 PM

Is that a gen IV surefit system you are using? I'm About to install that very system into my 72 in the next month or so.
Posted via Mobile Device

knomadd · 07-08-2013, 03:47 PM

I'm curious how you're going to run the battery cable to the starter now? Maybe use a junction on the passenger side near the old battery location? Run the battery wire along the core support and down the core support to the frame and back to the starter? Or up over the inner fender and down the firewall?

EZ SPEED · 07-09-2013, 08:55 AM

Quote:

Originally Posted by Hart_Rod

, yeah, I know, I know. Is this fast enough for you??

Yeah I guess it will do...

**Hart_Rod** · 07-09-2013, 09:05 AM

Quote:

Originally Posted by 68jewel

Looking good Rob. Keep up the good work. That engine bay is amazing!!

Thanks Marcus. It doesn't look as good in person, the semi-gloss paint hides a lot. I started to redo everything under the hood to make it look really nice, and then I came to my senses and I remembered what my objective was.....

.

Quote:

Originally Posted by NewType72

Is that a gen IV surefit system you are using? I'm About to install that very system into my 72 in the next month or so.
Posted via Mobile Device

Yes it is. You'll really like the ease of install.

Quote:

Originally Posted by knomadd

I'm curious how you're going to run the battery cable to the starter now? Maybe use a junction on the passenger side near the old battery location? Run the battery wire along the core support and down the core support to the frame and back to the starter? Or up over the inner fender and down the firewall?

Good question! Every time I solve one problem, I create one or two more. But your suggestions sound like a good option.

Quote:

Originally Posted by EZ SPEED

Yeah I guess it will do...

I've been carrying the aux battery tray since I was in Albuquerque. Guess it will finally be put to good use,

.

EZ SPEED · 07-09-2013, 09:06 AM

Quote:

Originally Posted by Hart_Rod

I've been carrying the aux battery tray since I was in Albuquerque. Guess it will finally be put to good use,

.

Cheater...LOL

mcbassin · 07-09-2013, 11:05 AM

Awesome progress!

C10_ustacould · 07-09-2013, 04:27 PM

Quote:

Originally Posted by knomadd

I'm curious how you're going to run the battery cable to the starter now? Maybe use a junction on the passenger side near the old battery location? Run the battery wire along the core support and down the core support to the frame and back to the starter? Or up over the inner fender and down the firewall?

Quote:

Originally Posted by Hart_Rod

Good question! Every time I solve one problem, I create one or two more. But your suggestions sound like a good option.

Why not use the factory cable for the camaro or an LS equipped truck the battery is on the drivers side in both... I believe.

**superflysteiny** · 07-09-2013, 06:50 PM

Looks great man

**Hart_Rod** · 07-09-2013, 09:30 PM

Quote:

Originally Posted by EZ SPEED

Cheater...LOL

Quote:

Originally Posted by mcbassin

Awesome progress!

Thanks!

Quote:

Originally Posted by BucksSS

Why not use the factory cable for the camaro or an LS equipped truck the battery is on the drivers side in both... I believe.

Hhhhmmmmm.....

Quote:

Originally Posted by superflysteiny

Looks great man

Thanks Eric!
Posted via Mobile Device

knomadd · 07-09-2013, 10:20 PM

Quote:

Originally Posted by BucksSS

Why not use the factory cable for the camaro or an LS equipped truck the battery is on the drivers side in both... I believe.

Quote:

Originally Posted by Hart_Rod

Hhhhmmmmm.....

I guess the better question would have been, where's the starter at on the new engine? Is it still on the passenger side?

How is the factory battery cable routed in the newer truck/camaro if the starter is on the passenger side and the battery is on the drivers side? Something to think about... If the starter is on the drivers side, then all of my previous comments are pointless. Just curious how you'd do it, that's all.

C10_ustacould · 07-09-2013, 10:40 PM

I believe that cable runs from junction block mounted on the side of the alternator bracket down and around the front of the oil pan then back to the starter, on the passenger side of the engine.

davidhelgesen · 07-10-2013, 07:58 PM

Just finished reading the whole thread front to back and I've gotta say you do some amazing work. You've got a great truck and I can't wait to see it fire up again.
Posted via Mobile Device

07-06-2013, 06:06 PM	#1001
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: 68 S/C update..... may of missed it, but are you running a 'tap up, tap down' switch for M on your 6L80e? __________________ Twin Turbo 64 nova project http://67-72chevytrucks.com/vboard/s...d.php?t=669163 68 camaro LS2/T56 vs. 06 GTO build http://67-72chevytrucks.com/vboard/s...d.php?t=516310 project incredible hulk build http://67-72chevytrucks.com/vboard/s...d.php?t=269754 project big red build http://67-72chevytrucks.com/vboard/s...d.php?t=342165 project "blue ray" build http://67-72chevytrucks.com/vboard/s...d.php?t=405465

07-08-2013, 09:38 AM	#1004
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,860	Re: 68 S/C update..... Center vent: Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-08-2013, 01:50 PM	#1005
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,860	Re: 68 S/C update..... Firewall block off plate installed and evaporator mounted. Pretty easy so far.... Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-08-2013, 01:52 PM	#1006
EZ SPEED Registered User Join Date: May 2009 Location: Anniston, Alabama Posts: 164	Re: 68 S/C update..... Keep up the good work. I installed one of those earlier this year. __________________ Eric 1967 C10 Small Window - LWB http://67-72chevytrucks.com/vboard/s...d.php?t=657509 2004 Silverado 2500HD - Turbo Diesel 603 rwhp / 1090 rwtq 2016 Camaro SS - Satin Pearl Nero wrap My 2010 Camaro SS Magazine feature (SOLD) http://www.superchevy.com/features/g...of-perfection/

07-08-2013, 02:39 PM	#1010
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 68 S/C update..... Looks great Rob, you wont know how to handle yourself riding around with the cool air blowing in your face! LOL, I would probably move the battery as well unless you can flip your intake to the other side somehow. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

07-08-2013, 03:39 PM	#1013
68jewel On the path to financial ruin! Join Date: Jan 2009 Location: Dallas, TX Posts: 722	Re: 68 S/C update..... Looking good Rob. Keep up the good work. That engine bay is amazing!! __________________ *'72 Chevelle SS--4.0 Whipple LS7, T56 Magnum, 20X9/20X13 HRE 791R, 6-piston Baer brakes, IRS '68 SWB C10--LS3, TKO-600, 22x10/22x12 HRE 948R, C5 suspension, shockwaves, custom frame Ooh Wee's Makeover*...http://67-72chevytrucks.com/vboard/s...d.php?t=376280

07-08-2013, 03:42 PM	#1014
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: 68 S/C update..... Is that a gen IV surefit system you are using? I'm About to install that very system into my 72 in the next month or so. Posted via Mobile Device __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

07-08-2013, 03:47 PM	#1015
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: 68 S/C update..... I'm curious how you're going to run the battery cable to the starter now? Maybe use a junction on the passenger side near the old battery location? Run the battery wire along the core support and down the core support to the frame and back to the starter? Or up over the inner fender and down the firewall? __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

07-09-2013, 11:05 AM	#1019
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 68 S/C update..... Awesome progress! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-09-2013, 06:50 PM	#1021
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: 68 S/C update..... Looks great man __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

07-09-2013, 10:40 PM	#1024
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: 68 S/C update..... I believe that cable runs from junction block mounted on the side of the alternator bracket down and around the front of the oil pan then back to the starter, on the passenger side of the engine. __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

07-10-2013, 07:58 PM	#1025
davidhelgesen Registered User Join Date: Jul 2013 Location: Kelowna BC Posts: 12	Re: 68 S/C update..... Just finished reading the whole thread front to back and I've gotta say you do some amazing work. You've got a great truck and I can't wait to see it fire up again. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.