Post your C/L - Facebook finds for everyone to enjoy! - Page 41 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**mr48chev** · 10-25-2022, 02:28 AM

54 Cab and frame out east of Renton Washington . The cab looks pretty decent outside of a lot of bondo in the cowl side panels. 500 with mostly good glass.

https://www.facebook.com/marketplace...2111112l%22%7D

That's a few miles from my sister and brother in law but I am out of project space.

**mr48chev** · 11-02-2022, 04:07 PM

For the PNW TF brigade, It looks like a long bed 58 stepside that was cut out for tubs at one time.

The fenders lookgood and the front panel and tailgate look real good.

https://www.facebook.com/marketplace...2111112l%22%7D

**Rickysnickers** · 11-04-2022, 12:15 PM

That doesn't look like a bad deal at all. Wish it was closer to me.

**mr48chev** · 11-04-2022, 03:51 PM

Actually it's only 277 or so miles from you. The price is a bit high by my standards but I figure that Cash Green money in the hand speaks loudly. still it's what you don't have to do to the fenders, tailgate and front panel that give the value.

**Rickysnickers** · 11-11-2022, 10:38 AM

https://www.facebook.com/marketplace...type=top_picks

**mr48chev** · 11-11-2022, 02:57 PM

I'm thinking that one is going to be for sale for a long time at that price. Sticking frufru that doesn't belong on that model of vehicle doesn't make it worth three times the money.

Nice truck to have to haul hay and lumber with though.

**mr48chev** · 11-14-2022, 02:58 AM

GMC 1 ton single rear wheel frame with a 228 and a pto driven water pump. This is a parts is parts deal for 200 in Walla Walla. https://www.facebook.com/marketplace...2111112l%22%7D

I don't know if the 9 foot box is part of it or not. No cab.

**mr48chev** · 11-16-2022, 04:08 PM

An Add in a bit of a different way. Rydman Ranch Company is a Chassis builder now located down the road from me in Prineville Oregon who builds some serous Chevy/GMC truck chassis.

Great people that I met at the Portland Roadster show a few years ago.

This is their offering for a 55/59.

**mr48chev** · 11-19-2022, 03:40 AM

52 Chevy Patina truck with full Corvette running gear. https://www.facebook.com/marketplace...type=top_picks

In Ellensberg Wa.

unclebrad · 11-21-2022, 01:21 PM

Vintage aluminum wheels - $150 (Turlock, CA)
https://modesto.craigslist.org/wto/7557440195.html
https://67-72chevytrucks.com/vboard/...1&d=1669050802

**mr48chev** · 11-21-2022, 03:19 PM

That's the deal of the day.

leegreen · 11-24-2022, 03:34 PM

Seattle CL
https://seattle.craigslist.org/oly/c...561002006.html

1952 chevy short box 5 window. 1982 s10 long bed. 504 frame kit still in the boxes. 52 has some rust in the floorboards. Both trucks run & have titles.

$7k is not a horrible deal if you want to build an S10 swapped AD

Name: Capture.jpg
Views: 372
Size: 40.6 KB

Name: Capture.jpg
Views: 372
Size: 40.6 KB

S10 looks decent too

**mr48chev** · 11-24-2022, 03:56 PM

That S-10 is worth 2500 to Migrant farm workers over here in the Yakima Valley if it runs and drives decent.

Truck looks better than most that come up for sale even if you sold off the S 10 and the kit.

leegreen · 11-29-2022, 02:19 AM

This Washington '55 3/4ton looks like it might be a deal for $2500. It looks solid

https://skagit.craigslist.org/cto/d/...562444178.html
Name: Capture.jpg
Views: 410
Size: 95.0 KB

Name: Capture.jpg
Views: 410
Size: 95.0 KB

**Rickysnickers** · 11-29-2022, 10:44 AM

Quote:

Originally Posted by leegreen

This Washington '55 3/4ton looks like it might be a deal for $2500. It looks solid

https://skagit.craigslist.org/cto/d/...562444178.html
Attachment 2234684

That looks like a pretty decent truck!!

daveshilling · 11-29-2022, 01:54 PM

Quote:

Originally Posted by leegreen

This Washington '55 3/4ton looks like it might be a deal for $2500. It looks solid

https://skagit.craigslist.org/cto/d/...562444178.html
Attachment 2234684

That's a sweet deal!! The interior was already repainted, the gauges look new/redone, and it's going to run... grab that $500 bed while you're on the road and you've got yourself a truck!

If I had space I'd park it and tinker, for sure. Somebody buy this and start a thread!

leegreen · 11-29-2022, 02:27 PM

yeah, get it running and bolt the fenders on and that is probably a $10k truck up here

**mr48chev** · 11-29-2022, 03:08 AM

TF shortie Box with fenders made into a trailer. Hermiston Oregon $500.
https://www.facebook.com/marketplace...2111112l%22%7D

_Ogre · 11-29-2022, 01:21 PM

Quote:

Originally Posted by mr48chev

TF shortie Box with fenders made into a trailer. Hermiston Oregon $500.

everything looks solid, well worth the price if you needed a bed or matching trailer

**jweb** · 11-29-2022, 11:22 AM

Really like this 55
https://eugene.craigslist.org/cto/7561829909.html

**mr48chev** · 11-29-2022, 03:50 PM

My buddy had a TF 1 ton with a hoist and flatbed for years. Nice truck that we hauled all kinds of stuff with, towed stuff all over with and it was a great little truck. He sold it to a Cemetery association to use in the cemetery somewhere here in the PNW.

I don't know if that 55 would be worth 10 K without a lot of extras but that would be great to redo but not overdo to have as your haul most anythign work truck.

The big problem with it is that if you have a truck with a flatbed and hoist your wife is always dreaming up projects that it can do. Haul top soil, haul gravel for the driveway, haul a load of mulch for the garden, Haul off a load of ????? then another load. Great for hauling firewood home too.

At the south end of Whidbey Island that one is going to take some spendy ferry rides or a lot of driving if you come from the south. Plus unless they have equipment you have to figure out how to either load or haul that steel flatbed.

Truth be, this might be one of those days it is a good thing that I don't have a lot of extra spending money as have wanted a 55/56 since the 70's. That and my trailer won't handle that much weight.

**mr48chev** · 12-01-2022, 12:40 AM

This Chopped 47 Showed up on FB market place tonight. It is out of Yakima Wa or for sale out of Yakima but I don't ever remember seeing it. Not bad at the price though. 17K. https://www.facebook.com/marketplace...type=top_picks

**Dan in Pasadena** · 12-14-2022, 07:35 PM

This just popped up on Craigslist in L.A.

I'd like to have it if I were doing another project. Saved pics just because I think it'll sell fast if the right guy (one of you!) sees it at only $8,500 obo.

https://losangeles.craigslist.org/lg...568368125.html

**Dan in Pasadena** · 12-14-2022, 07:46 PM

1955.1 Jimmy. VERY nicely done already. Personally, I'd put different wheels and tires but otherwise it's very nice. I suppose $27,500 is a lot in other parts of the country but not so much in SoCal.

https://losangeles.craigslist.org/la...568361250.html

vintovka · 12-30-2022, 04:15 PM

Quote:

Originally Posted by Dan in Pasadena

1955.1 Jimmy. VERY nicely done already. Personally, I'd put different wheels and tires but otherwise it's very nice. I suppose $27,500 is a lot in other parts of the country but not so much in SoCal.

https://losangeles.craigslist.org/la...568361250.html

Wonder why OP deleted it so fast???

10-25-2022, 02:28 AM	#1
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,648	Re: Post your C/L - Facebook finds for everyone to enjoy! 54 Cab and frame out east of Renton Washington . The cab looks pretty decent outside of a lot of bondo in the cowl side panels. 500 with mostly good glass. https://www.facebook.com/marketplace...2111112l%22%7D That's a few miles from my sister and brother in law but I am out of project space. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

11-02-2022, 04:07 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,648	Re: Post your C/L - Facebook finds for everyone to enjoy! For the PNW TF brigade, It looks like a long bed 58 stepside that was cut out for tubs at one time. The fenders lookgood and the front panel and tailgate look real good. https://www.facebook.com/marketplace...2111112l%22%7D Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

11-04-2022, 12:15 PM	#3
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 3,028	Re: Post your C/L - Facebook finds for everyone to enjoy! That doesn't look like a bad deal at all. Wish it was closer to me.

11-04-2022, 03:51 PM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,648	Re: Post your C/L - Facebook finds for everyone to enjoy! Actually it's only 277 or so miles from you. The price is a bit high by my standards but I figure that Cash Green money in the hand speaks loudly. still it's what you don't have to do to the fenders, tailgate and front panel that give the value. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

11-11-2022, 10:38 AM	#5
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 3,028	Re: Post your C/L - Facebook finds for everyone to enjoy! https://www.facebook.com/marketplace...type=top_picks Attached Images

11-11-2022, 02:57 PM	#6
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,648	Re: Post your C/L - Facebook finds for everyone to enjoy! I'm thinking that one is going to be for sale for a long time at that price. Sticking frufru that doesn't belong on that model of vehicle doesn't make it worth three times the money. Nice truck to have to haul hay and lumber with though. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

11-14-2022, 02:58 AM	#7
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,648	Re: Post your C/L - Facebook finds for everyone to enjoy! GMC 1 ton single rear wheel frame with a 228 and a pto driven water pump. This is a parts is parts deal for 200 in Walla Walla. https://www.facebook.com/marketplace...2111112l%22%7D I don't know if the 9 foot box is part of it or not. No cab. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

11-16-2022, 04:08 PM	#8
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,648	Re: Post your C/L - Facebook finds for everyone to enjoy! An Add in a bit of a different way. Rydman Ranch Company is a Chassis builder now located down the road from me in Prineville Oregon who builds some serous Chevy/GMC truck chassis. Great people that I met at the Portland Roadster show a few years ago. This is their offering for a 55/59. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

11-19-2022, 03:40 AM	#9
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,648	Re: Post your C/L - Facebook finds for everyone to enjoy! 52 Chevy Patina truck with full Corvette running gear. https://www.facebook.com/marketplace...type=top_picks In Ellensberg Wa. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

11-21-2022, 01:21 PM	#10
unclebrad Registered User Join Date: Jul 2009 Location: Concord, CA Posts: 149	Re: Post your C/L - Facebook finds for everyone to enjoy! Vintage aluminum wheels - $150 (Turlock, CA) https://modesto.craigslist.org/wto/7557440195.html https://67-72chevytrucks.com/vboard/...1&d=1669050802 Attached Images

11-21-2022, 03:19 PM	#11
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,648	Re: Post your C/L - Facebook finds for everyone to enjoy! That's the deal of the day. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

11-24-2022, 03:34 PM	#12
leegreen Registered User Join Date: Mar 2022 Location: Surrey BC Posts: 892	Re: Post your C/L - Facebook finds for everyone to enjoy! Seattle CL https://seattle.craigslist.org/oly/c...561002006.html 1952 chevy short box 5 window. 1982 s10 long bed. 504 frame kit still in the boxes. 52 has some rust in the floorboards. Both trucks run & have titles. $7k is not a horrible deal if you want to build an S10 swapped AD S10 looks decent too

11-24-2022, 03:56 PM	#13
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,648	Re: Post your C/L - Facebook finds for everyone to enjoy! That S-10 is worth 2500 to Migrant farm workers over here in the Yakima Valley if it runs and drives decent. Truck looks better than most that come up for sale even if you sold off the S 10 and the kit. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

11-29-2022, 02:19 AM	#14
leegreen Registered User Join Date: Mar 2022 Location: Surrey BC Posts: 892	Re: Post your C/L - Facebook finds for everyone to enjoy! This Washington '55 3/4ton looks like it might be a deal for $2500. It looks solid https://skagit.craigslist.org/cto/d/...562444178.html

11-29-2022, 02:27 PM	#17
leegreen Registered User Join Date: Mar 2022 Location: Surrey BC Posts: 892	Re: Post your C/L - Facebook finds for everyone to enjoy! yeah, get it running and bolt the fenders on and that is probably a $10k truck up here



Register or Log In To remove these advertisements.

11-29-2022, 03:08 AM	#18
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,648	Re: Post your C/L - Facebook finds for everyone to enjoy! TF shortie Box with fenders made into a trailer. Hermiston Oregon $500. https://www.facebook.com/marketplace...2111112l%22%7D Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

11-29-2022, 11:22 AM	#20
jweb Senior Member Join Date: Apr 2010 Location: Oregon Posts: 1,192	Re: Post your C/L - Facebook finds for everyone to enjoy! Really like this 55 https://eugene.craigslist.org/cto/7561829909.html Attached Images __________________ 1951 Truck, LS1/4L60 1964 Suburban, current project 2014 Silverado daily driver 1953 Westerner "canned ham" trailer, rebuilt 1974 Prowler trailer, rebuilt

11-29-2022, 03:50 PM	#21
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,648	Re: Post your C/L - Facebook finds for everyone to enjoy! My buddy had a TF 1 ton with a hoist and flatbed for years. Nice truck that we hauled all kinds of stuff with, towed stuff all over with and it was a great little truck. He sold it to a Cemetery association to use in the cemetery somewhere here in the PNW. I don't know if that 55 would be worth 10 K without a lot of extras but that would be great to redo but not overdo to have as your haul most anythign work truck. The big problem with it is that if you have a truck with a flatbed and hoist your wife is always dreaming up projects that it can do. Haul top soil, haul gravel for the driveway, haul a load of mulch for the garden, Haul off a load of ????? then another load. Great for hauling firewood home too. At the south end of Whidbey Island that one is going to take some spendy ferry rides or a lot of driving if you come from the south. Plus unless they have equipment you have to figure out how to either load or haul that steel flatbed. Truth be, this might be one of those days it is a good thing that I don't have a lot of extra spending money as have wanted a 55/56 since the 70's. That and my trailer won't handle that much weight. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. Last edited by mr48chev; 11-29-2022 at 04:08 PM.

12-01-2022, 12:40 AM	#22
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,648	Re: Post your C/L - Facebook finds for everyone to enjoy! This Chopped 47 Showed up on FB market place tonight. It is out of Yakima Wa or for sale out of Yakima but I don't ever remember seeing it. Not bad at the price though. 17K. https://www.facebook.com/marketplace...type=top_picks Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

12-14-2022, 07:35 PM	#23
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,340	Re: Post your C/L - Facebook finds for everyone to enjoy! This just popped up on Craigslist in L.A. I'd like to have it if I were doing another project. Saved pics just because I think it'll sell fast if the right guy (one of you!) sees it at only $8,500 obo. https://losangeles.craigslist.org/lg...568368125.html Attached Images __________________ '55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda!

12-14-2022, 07:46 PM	#24
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,340	Re: Post your C/L - Facebook finds for everyone to enjoy! 1955.1 Jimmy. VERY nicely done already. Personally, I'd put different wheels and tires but otherwise it's very nice. I suppose $27,500 is a lot in other parts of the country but not so much in SoCal. https://losangeles.craigslist.org/la...568361250.html Attached Images __________________ '55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda!

Register or Log In To remove these advertisements.