Kabwe's aka Bam's build

[Kabwe]

Originally Posted by Dan in Pasadena

Ha ha, just another one of the services I have to offer; foolery!

Bam, Your truck is gonna be kickass. Hell, it's kickass already. The color reminds me of Jolly Rancher Apple candies - one of my favorites.

EDIT: Oops, missed the Jolly Rancher reference above. I'm always a day late and a (few thousand) dollars short!

So, are you going for final painting on the whole thing now? You're doing this yourself, right? YOu know we throw around the term "awesome" casually nowadays but being able to have your fab chops AND do the painting too? THAT is truly awe inspiring .

If you decide you need helping (fool) hands on a weekend or something, let me know and I'd be willing to come down, push a broom, whatever you need. Best, Dan

Yeah I will be doing everything on this project with the exception of stitching the interior. Paint, body, and everything else in between. Its not inspiring at all its a lack of money.lol No really even if I had lots of money I would still do everything myself because I learned that no one cares about your things like you.

Don't say you will help because you my just be called upon.lol

Originally Posted by candyx

Kabwe looking good did you put one of those panels by your cool wheels to see how the color will pop on the chrome?
How much longer do you have before you shoot the body?

Good idea so here you go Candyx. By the way no chrome wheels are allowed at my house, its polished aluminum my friend. As far as how long before the body? Man I can't tell you and be honest at the same time.lol





I thinks I likes even more thanks for the suggestion buddy.

[Rods57]

Low and mean and keep it clean....should say Low and mean and keep it GREEN!

Looks great that will really make a statement.

[hp1957]

Kabwe, Loud Green looks great!!

Harvey

1957 Chevy Stepside
1958 GMC Fleetside C4 build thread: http://67-72chevytrucks.com/vboard/s...65#post5510465

[Kabwe]

Originally Posted by Rods57

Low and mean and keep it clean....should say Low and mean and keep it GREEN!

If I said that the treehuggers may get the wrong idea and think its a hybrid.lol

[VDOG]

Originally Posted by Kabwe

Yeah I will be doing everything on this project with the exception of stitching the interior.
Don't say you will help because you my just be called upon.lol

Except the interior? Wait what are you saying, the great, mighty and all powerful BAM, is not doing his interior? Say it aint so!
As for helping you, you know darn well your not going to call us cause we might accidentally pick up a tool and try to turn a bolt, and if it does not line up, your going to have blood on your hands. LOL!!!!

Yes im causing trouble again. That color next to the wheels, thats a killer combo.

[Kabwe]

Originally Posted by Roadkill58

Is there some green paint in your 55's future?

Yep

Originally Posted by OKGMC4

What metal polish do you use? That wheel looks out of sight...Mothers in the can just hasn't done that for me and I been using it 20 years now. Thanks in advance!

Man thats how those wheels came. My buddy who is a wheel smith told me thats how forged billet Aluminum is suppose to shine.

Originally Posted by fat56

Looks Killa Kabwe. the flake makes it pop, should look good over a large surface in the sun, and with a truck with so many curves on it.

thanks buddy

Originally Posted by VDOG

Except the interior? Wait what are you saying, the great, mighty and all powerful BAM, is not doing his interior? Say it aint so!
As for helping you, you know darn well your not going to call us cause we might accidentally pick up a tool and try to turn a bolt, and if it does not line up, your going to have blood on your hands. LOL!!!!

Yes im causing trouble again. That color next to the wheels, thats a killer combo.

That's the great and powerful Oz to you, you little munchkin.lol

[Kim57]

That's going to look great Bam.
I expect to see it in paint next week.
Kim

[oldman3]

That green next to your wheel looks great....Jim

[candyx]

Kabwe

Niceeeeeee

Wheels look really good against that green,that aluminum really is polished !!!

[Low Elco]

I usually go chromabase and Nason clear, works great. Color looks good!
Posted via Mobile Device

[Kabwe]

Originally Posted by gmjim4x4

Kabwe, you are a true craftsman ! You have done some outstanding work on this project. I am wondering if you have done or seen someone do a 55-57 hood modification using part of a 58-59 hood. As in cutting the area with lines on the 58-59 and putting that top area on the 55-57. just wondering if its been done. You do good work!

Thanks a lot buddy.

Checkout out jjjmm56 build thread. He made fabracations to his 56 Chevy hood to make it look like a 58-59.

Here is a link to his build thread.
http://67-72chevytrucks.com/vboard/s...d.php?t=350951

Originally Posted by Low Elco

I usually go chromabase and Nason clear, works great. Color looks good!
Posted via Mobile Device

Thanks buddy. I can't get chromabase here in Cali anymore. I can get the clear go figure.lol Nutty Cali law makers I guess.

Yeah I was pleasantly shocked by how well this Nason clear laid down. No yellow hue and like glass. I'm just a glorified shadetree type guy so it works for me.

[Dan in Pasadena]

Bam,
Someone over on the HAMB board referred to you having taken off your roof to address rust around the perimeter between the inner and outer skins. Did you do this?

If so, I went backcthrough this thread and didn't see it. I am wondering if that work was not replaced when you lost your photos and had to re-post? If so, any chance you could post some photos (if you have them) and explain what's involved?

I have literally one inch of rust-through right where the passenger side gutter meets the roof skin - small, but I know there's more in there. I also have what I think is some old rust through inside that an old owner did some bad gas welding on in an attempt to just "cover the holes". This part is a guess but I THINK that's what happened.

I HAD planned to flap disc the interior weld blobs, MIG the exterior rust-through, reseal the gutter with modern sealant, and coat in between the skins with a heavy double coat of the Eastwood internal frame rust preventative stuff - mostly cause I don't have your fab chops or the money to pay others to do it!! Tell me how difficult the de-roof/re-roof is and your thoughts on my plan? Be honest, I can take it.

[Roadkill58]

Is there some green paint in your 55's future?

[OKGMC4]

What metal polish do you use? That wheel looks out of sight...Mothers in the can just hasn't done that for me and I been using it 20 years now. Thanks in advance!

[fat56]

Looks Killa Kabwe. the flake makes it pop, should look good over a large surface in the sun, and with a truck with so many curves on it.

[Kabwe]

Originally Posted by Dan in Pasadena

Bam,
Someone over on the HAMB board referred to you having taken off your roof to address rust around the perimeter between the inner and outer skins. Did you do this?

If so, I went backcthrough this thread and didn't see it. I am wondering if that work was not replaced when you lost your photos and had to re-post? If so, any chance you could post some photos (if you have them) and explain what's involved?

I have literally one inch of rust-through right where the passenger side gutter meets the roof skin - small, but I know there's more in there. I also have what I think is some old rust through inside that an old owner did some bad gas welding on in an attempt to just "cover the holes". This part is a guess but I THINK that's what happened.

I HAD planned to flap disc the interior weld blobs, MIG the exterior rust-through, reseal the gutter with modern sealant, and coat in between the skins with a heavy double coat of the Eastwood internal frame rust preventative stuff - mostly cause I don't have your fab chops or the money to pay others to do it!! Tell me how difficult the de-roof/re-roof is and your thoughts on my plan? Be honest, I can take it.

Hey Dan,

I fixed that roof two times.lol So I don't know which one you are talking about so I will post pics of both. The first fix was when I just fixed the rust under the eye brown. I did that before I found out that they sold new roof panels.

First fix pics
Rusted area

Cut out the rust

Handmade patch panel

Welded it in and grind and primed.


Second fix
I found out they sold new roof panels so I purchased one. As you can see in the pic, the new roof has the area under the eye brow the is a rusted area on a lot of our trucks. It also comes with the drip rails. This is the part of the drip rails the ride on top of the cab's rails like a sandwich. I'm not running drip rails so I cut them off.


After a lot of measure I cut the roof of my cab. The eye brow section is spot welded on. If you are keeping the drip rails clean the area good and you well see the spot welds there also.




Completed Roof

[Dan in Pasadena]

Originally Posted by Kabwe

....

Thanks for the info Bam.

I've got a lot of stupid questions about this but let me ask the most basic:

If I find those spot welds and use a spot weld cutter...is it then just a matter of carefully prying the roof panel to separate it from the cab? If so, once I'd repair any damage to the cab part, does the roof panel just drop into place (relatively) for plug welding?

I see surface rust on yours, did you use some kind of coating or weld-thru primer in there before replacing your roof?

Any other details about how relatively difficult/easy it is to do this repair?

[Kabwe]

Originally Posted by Dan in Pasadena

Thanks for the info Bam.

I've got a lot of stupid questions about this but let me ask the most basic:

If I find those spot welds and use a spot weld cutter...is it then just a matter of carefully prying the roof panel to separate it from the cab? If so, once I'd repair any damage to the cab part, does the roof panel just drop into place (relatively) for plug welding?

I see surface rust on yours, did you use some kind of coating or weld-thru primer in there before replacing your roof?

Any other details about how relatively difficult/easy it is to do this repair?

First off, there are no stupid questions. There are only stupid people that make themselves feel big by trying to make other people feel stupid for asking questions. We learn by asking questions buddy.

Dan start with the spot weld first and that will guide you to what you may have to cut. There are also spot welds along the bottom ridge of windshield panel.

Yes I did wire brush the inner roof panel and coat it with zero rust primer.

Difficulty. I really don't find anything difficult just a lot of work and very time consuming. If you can weld, cut, and measure you can do this. It would not be my first project do some other rust repair until you build your confidence up and you will be able to do this no problem. Its about being confident man and you have half the job done.

[_Ogre]

Originally Posted by Kabwe

Difficulty. I really don't find anything difficult just a lot of work and very time consuming.

my new mantra
not many people think this way

tank install looks good too

[Low Elco]

If you try this, get a spot weld cutter. Not real expensive and makes a lot of the sheet metal stuff on these old trucks a breeze. A knotted wire brush run down the channel will show the spots, centerpunch in the middle of the spot and drill them dudes!
Posted via Mobile Device

[Kabwe]

Well I got a little more done today. Slowly I turn, step by step, inch by inch.lol Well thats how I doing it.

I know its over kill by I base coat cleared the gas tank just because. No other reason.


Here is the tank installed between the frame rails.

[VDOG]

Originally Posted by Kabwe

Well I got a little more done today. Slowly I turn, step by step, inch by inch.lol Well thats how I doing it.

I know its over kill by I base coat cleared the gas tank just because. No other reason.


Here is the tank installed between the frame rails.

Step by step, inch by inch, I knew you were related to the Stoogers. You must be their other cousin on their other cousins side. LOL
Great work Bam, that tank looks good. But we would not expect anything less from you.

[Kabwe]

Thanks guys

Originally Posted by VDOG

Step by step, inch by inch, I knew you were related to the Stoogers. You must be their other cousin on their other cousins side. LOL
Great work Bam, that tank looks good. But we would not expect anything less from you.

LOL. You got it huh? So you must be as big a Stoogies fan as me if you know the Niagara Falls bit.

The Three Stooges (Niagara Falls Skit) - YouTube

[oldman3]

Tank looks super between the rails, nice job...Jim

[Kim57]

Looks good.
Kim