Do you need '64-'66 Chevy Truck Parts? - Page 41 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daverod · 12-18-2009, 05:21 PM

Tony have an water outlet for a 292?

dlandez · 12-18-2009, 09:43 PM

i have a 64 c-10 and need a heater box do u have one and how much if u do thank u

*LILRED66* · 12-18-2009, 10:56 PM

Quote:

Originally Posted by daverod

Tony have an water outlet for a 292?

It appears your water outlet is good, you just need an NPT male connector. Am I seeing the photo correctly?

daverod · 12-18-2009, 11:36 PM

Quote:

Originally Posted by LILRED66

It appears your water outlet is good, you just need an NPT male connector. Am I seeing the photo correctly?

It's cracked where the temp sensor screws in. A guy said he could weld it but I would like to see how much for a new one.

dlandez · 12-19-2009, 09:30 AM

Quote:

Originally Posted by LILRED66

Do you need parts for your 4-5-6 Chevy Truck project? During the process of collecting and fixing up my trucks, I have acquired many good, used OEM parts for 4-5-6 Chevy Trucks. I am able to ship most parts, however, due to size, weight and cost, some parts, like cabs, frames and beds, are not very economical to ship.

Let me know your 4-5-6 Chevy Truck part needs and I will try to take care of it.

I need a heater box for my 64 chevy c-10 do u have aone and how much im in norman oklahoma

hauler · 12-19-2009, 11:05 PM

hey tony just wondering if you might have a manual steering gear for a 66 k-10 or maybe the adapting plates for converting to power steering? Thanks Mike

Envy · 12-20-2009, 09:00 PM

PM'ed you with my email address for those pictures

*LILRED66* · 12-21-2009, 12:43 PM

Quote:

Originally Posted by dlandez

I need a heater box for my 64 chevy c-10 do u have aone and how much im in norman oklahoma

Good to chat with you on the phone, so now I know what you need. Please e-mail a picture of what you have and I will make sure to include all the little fasteners, etc. that you will need for a complete installation.

Thanks for the opportunity and Happy Holidays.

*LILRED66* · 12-21-2009, 12:45 PM

Quote:

Originally Posted by hauler

hey tony just wondering if you might have a manual steering gear for a 66 k-10 or maybe the adapting plates for converting to power steering? Thanks Mike

Good morning and thanks for the inquiry. I have both...a factory 4x4 manual steering gear box, as well as, a power steering conversion kit, including the mounting plates, spacers and hardware.

I will send you a PM with the particulars.

Thanks for the opportunity and Happy Holidays.

Gemner · 12-21-2009, 09:24 PM

just wondering if theres any update on this part

Quote:

Originally Posted by Gemner

Im in need of the throwout bearing shaft from a 3 on the tree, the bolt on part pictured below (not the exact part, just the same idea)

Envy · 12-21-2009, 10:47 PM

payment sent and PM'ed you about the other, thanks

*LILRED66* · 12-22-2009, 09:55 AM

Quote:

Originally Posted by Gemner

just wondering if theres any update on this part

Oops...I overlooked my note on this one. I will check on it today and get back with you. Thanks for the reminder and Happy Holidays.

*LILRED66* · 12-22-2009, 09:55 AM

Quote:

Originally Posted by Envy

payment sent and PM'ed you about the other, thanks

Josh:

Thanks for your business. I replied to your PM. Thanks and Happy Holidays.

*LILRED66* · 12-22-2009, 09:58 AM

We did a little rearranging at the shop, so let me know if you need any good, used '60-'66 Chevy/GMC truck parts.

ravens65 · 12-23-2009, 10:07 PM

lookin for a mint 4-5-6 hood , I bought a fiberglass one and sold the stock one , now I wish that I didn't Eric

C10Slim · 12-26-2009, 02:22 PM

Hey Tony, I need a couple of parts. Evidently there are some curly-q's that loop through the frame under the cab and hold the intermediate brake cables close to the frame. Do you sell these?

lostnthe60s · 12-26-2009, 08:30 PM

Hey I messaged you a several weeks ago about doors and a front left fender. You said you were organizing and you would get back to me. I never heard from you. Have you had time to organize? If so do you have some good doors and a fender?
Thx

61superman · 12-30-2009, 07:16 AM

hello tony qurious if you have a rear bumper for a suburban and a third seat also for suburban. i don't know if you also deal in suburban parts just thought i'd ask.
thanks

gtbrain · 12-30-2009, 12:27 PM

Tony, curious if you have a dual groove fan pulley. I am in the process of adding a power steering pump to my 66 inline 250. Thanks for your time.

creep · 12-31-2009, 10:59 AM

I noticed you have a GMC hood. Is it in good shape and how much would it be shipped to 44035.

tapeworm · 01-02-2010, 07:29 PM

pm sent

ironhorse1973 · 01-03-2010, 12:13 PM

Hi Tony. Do you have any 66 C-10 front bumpers? Pics, how much?

Chris

Envy · 01-05-2010, 11:29 PM

Tony, just curious if you have any tracking info on my parts, thanks.

Muleman100 · 01-06-2010, 04:00 PM

Do you have a good tailgate for a 66' fleetside.

creep · 01-06-2010, 04:02 PM

Quote:

Originally Posted by Envy

Tony, just curious if you have any tracking info on my parts, thanks.

Ditto that

12-18-2009, 05:21 PM	#1001
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Do you need '64-'66 Chevy Truck Parts? Tony have an water outlet for a 292? Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

12-18-2009, 09:43 PM	#1002
dlandez Registered User Join Date: Apr 2009 Location: norman ok, hall park area Posts: 8	Re: Do you need '64-'66 Chevy Truck Parts? i have a 64 c-10 and need a heater box do u have one and how much if u do thank u

12-19-2009, 11:05 PM	#1006
hauler Registered User Join Date: Nov 2009 Location: Polson MT Posts: 1	Re: Do you need '64-'66 Chevy Truck Parts? hey tony just wondering if you might have a manual steering gear for a 66 k-10 or maybe the adapting plates for converting to power steering? Thanks Mike

12-20-2009, 09:00 PM	#1007
Envy Registered User Join Date: Dec 2009 Location: Orlando, FL Posts: 131	Re: Do you need '64-'66 Chevy Truck Parts? PM'ed you with my email address for those pictures

12-21-2009, 10:47 PM	#1011
Envy Registered User Join Date: Dec 2009 Location: Orlando, FL Posts: 131	Re: Do you need '64-'66 Chevy Truck Parts? payment sent and PM'ed you about the other, thanks

12-22-2009, 09:58 AM	#1014
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Do you need '64-'66 Chevy Truck Parts? We did a little rearranging at the shop, so let me know if you need any good, used '60-'66 Chevy/GMC truck parts. Attached Images

12-23-2009, 10:07 PM	#1015
ravens65 Registered User Join Date: Dec 2009 Location: clermont florida Posts: 176	Re: Do you need '64-'66 Chevy Truck Parts? lookin for a mint 4-5-6 hood , I bought a fiberglass one and sold the stock one , now I wish that I didn't Eric

12-26-2009, 02:22 PM	#1016
C10Slim Registered User Join Date: Jul 2009 Location: Needville, TX Posts: 283	Re: Do you need '64-'66 Chevy Truck Parts? Hey Tony, I need a couple of parts. Evidently there are some curly-q's that loop through the frame under the cab and hold the intermediate brake cables close to the frame. Do you sell these?

12-26-2009, 08:30 PM	#1017
lostnthe60s Registered User Join Date: Oct 2009 Location: Atkins, Arkansas Posts: 6	Re: Do you need '64-'66 Chevy Truck Parts? Hey I messaged you a several weeks ago about doors and a front left fender. You said you were organizing and you would get back to me. I never heard from you. Have you had time to organize? If so do you have some good doors and a fender? Thx

12-30-2009, 07:16 AM	#1018
61superman Registered User Join Date: Dec 2006 Location: sl,ut Posts: 145	Re: Do you need '64-'66 Chevy Truck Parts? hello tony qurious if you have a rear bumper for a suburban and a third seat also for suburban. i don't know if you also deal in suburban parts just thought i'd ask. thanks __________________ current project: 1964 chevy II Wagon 1956 3100 1972 c10 burb bagged 1962 GMC burb 1963 c10 burb 1966 c10 burb 1995 chevy lowerado 5/7 static drop daily driver 1963 c10 step side 1965 super sport impala 1967 c30

12-30-2009, 12:27 PM	#1019
gtbrain Registered User Join Date: Apr 2008 Location: bismarck North Dakota Posts: 51	Re: Do you need '64-'66 Chevy Truck Parts? Tony, curious if you have a dual groove fan pulley. I am in the process of adding a power steering pump to my 66 inline 250. Thanks for your time.

12-31-2009, 10:59 AM	#1020
creep Registered Loser Join Date: Jun 2009 Location: Elyria, OH Posts: 1,523	Re: Do you need '64-'66 Chevy Truck Parts? I noticed you have a GMC hood. Is it in good shape and how much would it be shipped to 44035. __________________ ((..)) ((0)) '63 GMC lwb, 383, th350, lays frame, genuine patina. The Build Thread - http://67-72chevytrucks.com/vboard/s...d.php?t=374267 '88 Astro cargo bagged, shaved, phantom grille. SOLD '50 Chevy 2 door sedan awaiting attention. 2014 Silverado Ext cab, 5.3, daily driver.

01-02-2010, 07:29 PM	#1021
tapeworm fan of "Butters" Stotch Join Date: Dec 2009 Location: St. Paul, MN Posts: 267	Re: Do you need '64-'66 Chevy Truck Parts? pm sent __________________ 64 shortbox fleetside replacing rusty junk with more junk, and one day to become a real truck again

01-03-2010, 12:13 PM	#1022
ironhorse1973 Registered User Join Date: Nov 2009 Location: Fox lake, IL Posts: 8	Re: Do you need '64-'66 Chevy Truck Parts? Hi Tony. Do you have any 66 C-10 front bumpers? Pics, how much? Chris

01-05-2010, 11:29 PM	#1023
Envy Registered User Join Date: Dec 2009 Location: Orlando, FL Posts: 131	Re: Do you need '64-'66 Chevy Truck Parts? Tony, just curious if you have any tracking info on my parts, thanks.



Register or Log In To remove these advertisements.

01-06-2010, 04:00 PM	#1024
Muleman100 Registered User Join Date: Nov 2008 Location: Crosby, Texas Posts: 377	Re: Do you need '64-'66 Chevy Truck Parts? Do you have a good tailgate for a 66' fleetside.

Register or Log In To remove these advertisements.