How about some pics of bagged C-10's - Page 41 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bmfpeterson · 06-15-2010, 12:29 PM

I just did a cpp notch in the back. it is sitting on the rear end in the pic, I have bags for the back just in place of the stock coil springs. and in the front is all stock arms with bags in place of the coils as well. very simple setup. there are write ups on the front and back bag install the way I did it all over this forum!

71rustpile · 06-15-2010, 09:26 PM

Quote:

Originally Posted by bmfpeterson

I just did a cpp notch in the back. it is sitting on the rear end in the pic, I have bags for the back just in place of the stock coil springs. and in the front is all stock arms with bags in place of the coils as well. very simple setup. there are write ups on the front and back bag install the way I did it all over this forum!

Cool, I did the same bag setup as you and the CPP notch as well but just ordered 2" blocks. Mine is 2" away from the axle touching the top of the notch.

bmfpeterson · 06-16-2010, 02:34 PM

I haven't put my bags in yet..... does it not touch the axle because the bag stops it? I just wonder because mine are not installed yet, I was planning on a drop block as well. did you cut some of your front fender out..... I have been thinking about it just haven't committed yet! lol

I have some family that lives in littleton. I think they live in a development called highlands????

71rustpile · 06-16-2010, 11:13 PM

Quote:

Originally Posted by bmfpeterson

I haven't put my bags in yet..... does it not touch the axle because the bag stops it? I just wonder because mine are not installed yet, I was planning on a drop block as well. did you cut some of your front fender out..... I have been thinking about it just haven't committed yet! lol

I have some family that lives in littleton. I think they live in a development called highlands????

Yes the bag does limit how far the axle goes up in the notch, I'm not planning on running inner fender wells. Your fam probably lives in Highlands Ranch. I'm just about ready to set the body back on the frame and will post some pics in the next week!

AVS_JASON · 06-21-2010, 11:38 AM

Just got some new wheels for my truck. Still got a long way to go, but its getting there. LOL...

justpball · 06-21-2010, 12:01 PM

Looks great jason!

scotts62 · 06-21-2010, 05:29 PM

Very cool!

22's or 24's?

AVS_JASON · 06-21-2010, 05:31 PM

22's with a 265/35-22 tire.

scotts62 · 06-21-2010, 05:33 PM

Quote:

Originally Posted by AVS_JASON

22's with a 265/35-22 tire.

Thats cool, looks great, have a build thread on that bad boy yet?

AVS_JASON · 06-21-2010, 06:11 PM

Thanks man.... No build thread, might have to make one. Just want a simple daily driver that looks cool.

hotrodhomi · 06-21-2010, 07:19 PM

Quote:

Originally Posted by AVS_JASON

Just want a simple daily driver that looks cool.

Mission accomplished.

**kev2809** · 06-21-2010, 08:37 PM

^^^ what he said! looks good with the 22's

are you going to repaint it?

AVS_JASON · 06-22-2010, 10:17 AM

Thanks guys, appreciate it. Paint and body is the next step. Have not decided on a color yet. Either red, or white, or maybe a metallic charcoal gray. Just don't know yet though, lol.

jrsmith_2010 · 06-24-2010, 02:09 AM

i like the idea of the metallic charcoal

Ghostwhite · 06-24-2010, 06:40 AM

Quote:

Originally Posted by jrsmith_2010

i like the idea of the metallic charcoal

This!

Innovation By Design · 07-06-2010, 09:50 PM

76 crew cab short bed

joe231 · 07-06-2010, 11:00 PM

Quote:

Originally Posted by Innovation By Design

76 crew cab short bed

What's up Travis?
Glad you found your way here!
Cool back half!!!

scotts62 · 07-06-2010, 11:27 PM

guess we need to head west and check that out sometime huh Joe?

bagged74 · 07-07-2010, 01:15 AM

Travis is actually the guy i bought my crew from a couple of years ago

joe231 · 07-07-2010, 06:55 AM

Quote:

Originally Posted by scotts62

guess we need to head west and check that out sometime huh Joe?

heck yeah!!

Quote:

Originally Posted by bagged74

Travis is actually the guy i bought my crew from a couple of years ago

Oh really?
small world

Innovation By Design · 07-07-2010, 07:03 AM

Quote:

Originally Posted by bagged74

Travis is actually the guy i bought my crew from a couple of years ago

Damn I have been wondering where that truck was now!! How are you doing?

**67cheby** · 07-07-2010, 09:40 AM

THat is SICK..... im in Siloam Springs ar, where is Mustang ??

joe231 · 07-07-2010, 12:36 PM

Mustang is west/southwest of OKC about 15-20 minutes

bmfpeterson · 07-08-2010, 11:04 AM

That back half is freakin bad ass! it looks like a trophy truck!!!!

Mad Rods · 07-10-2010, 02:13 AM

That truck is gonna be sick!!!! What size wheels u gonna run?

06-15-2010, 12:29 PM	#1001
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: How about some pics of bagged C-10's I just did a cpp notch in the back. it is sitting on the rear end in the pic, I have bags for the back just in place of the stock coil springs. and in the front is all stock arms with bags in place of the coils as well. very simple setup. there are write ups on the front and back bag install the way I did it all over this forum!

06-16-2010, 02:34 PM	#1003
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: How about some pics of bagged C-10's I haven't put my bags in yet..... does it not touch the axle because the bag stops it? I just wonder because mine are not installed yet, I was planning on a drop block as well. did you cut some of your front fender out..... I have been thinking about it just haven't committed yet! lol I have some family that lives in littleton. I think they live in a development called highlands????

06-21-2010, 11:38 AM	#1005
AVS_JASON AIRBAGPARTS.COM Join Date: Dec 2008 Location: CEN CAL Posts: 520	Re: How about some pics of bagged C-10's Just got some new wheels for my truck. Still got a long way to go, but its getting there. LOL...

06-21-2010, 12:01 PM	#1006
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: How about some pics of bagged C-10's Looks great jason! __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

06-21-2010, 05:29 PM	#1007
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: How about some pics of bagged C-10's Very cool! 22's or 24's? __________________ Scott 93 crew cab build Project 62

06-21-2010, 05:31 PM	#1008
AVS_JASON AIRBAGPARTS.COM Join Date: Dec 2008 Location: CEN CAL Posts: 520	Re: How about some pics of bagged C-10's 22's with a 265/35-22 tire.

06-21-2010, 06:11 PM	#1010
AVS_JASON AIRBAGPARTS.COM Join Date: Dec 2008 Location: CEN CAL Posts: 520	Re: How about some pics of bagged C-10's Thanks man.... No build thread, might have to make one. Just want a simple daily driver that looks cool.

06-21-2010, 08:37 PM	#1012
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: How about some pics of bagged C-10's ^^^ what he said! looks good with the 22's are you going to repaint it? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

06-22-2010, 10:17 AM	#1013
AVS_JASON AIRBAGPARTS.COM Join Date: Dec 2008 Location: CEN CAL Posts: 520	Re: How about some pics of bagged C-10's Thanks guys, appreciate it. Paint and body is the next step. Have not decided on a color yet. Either red, or white, or maybe a metallic charcoal gray. Just don't know yet though, lol.

06-24-2010, 02:09 AM	#1014
jrsmith_2010 I like turtles... Join Date: May 2008 Location: Kansas Posts: 993	Re: How about some pics of bagged C-10's i like the idea of the metallic charcoal __________________ 1979 Silverado- lowered 5/7, 20 inch Boss rims, everything shaved, caddy lights, billet interior, UP FOR SALE! 1983 Scottsdale-on the back burner...SOLD!!! 1992 Silverado- extended cab, stock for now, but no promises SOLD!!! 2006 Chevy Cobalt-college car, staying stock Whatever can't get fixed with a hammer, a roll of duct tape, a clothes hanger, a tube of glue, and a case of beer, can wait until tomorrow.

07-06-2010, 09:50 PM	#1016
Innovation By Design Registered User Join Date: Jul 2010 Location: Mustang Oklahoma Posts: 29	couple pics of the crew cab 76 crew cab short bed Attached Images

07-06-2010, 11:27 PM	#1018
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: How about some pics of bagged C-10's guess we need to head west and check that out sometime huh Joe? __________________ Scott 93 crew cab build Project 62

07-07-2010, 01:15 AM	#1019
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	Re: How about some pics of bagged C-10's Travis is actually the guy i bought my crew from a couple of years ago

07-07-2010, 09:40 AM	#1022
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How about some pics of bagged C-10's THat is SICK..... im in Siloam Springs ar, where is Mustang ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

07-07-2010, 12:36 PM	#1023
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: How about some pics of bagged C-10's Mustang is west/southwest of OKC about 15-20 minutes __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

07-08-2010, 11:04 AM	#1024
bmfpeterson Registered User Join Date: Jul 2008 Location: Queen Creek, AZ Posts: 538	Re: How about some pics of bagged C-10's That back half is freakin bad ass! it looks like a trophy truck!!!!

07-10-2010, 02:13 AM	#1025
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Re: How about some pics of bagged C-10's That truck is gonna be sick!!!! What size wheels u gonna run? __________________ Chevy Only Tx.........

Register or Log In To remove these advertisements.